Elektrolyt 220 µF @ 35V
Elektrolyt 220 µF @ 35V
Elektrolyt 220 µF @ 35V

Elektrolyt 220 µF @ 35V

Product No.:
cra-220-35
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.002 kg per piece
0,18 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
EU legal guarantee notice
Description
  • Type: Electrolytic can capacitor
  • Capacitance: 220 µF
  • Voltage Rating: 35 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 10 mm x 12 mm
  • Termination Style: radial
  • Grid: 5

Images are for reference only. See Product Specifications

Safety Information
Safety Information for Electrical Components, Especially for Tube Amplifiers

For all electrical, electromechanical, and mechanical components, the specifications and operating parameters defined by the respective type standards generally apply.
Further information, where available, can be found in the respective data sheets and product descriptions included with the product.

General Information
  • NOT SUITABLE FOR CHILDREN – choking hazard due to small parts
  • NOT SUITABLE FOR UNTRAINED PERSONS – danger to life due to high voltages
  • The safety and processing requirements applicable to the component must be observed
  • CE conformity applies only when installed professionally
  • Warranty becomes void in case of improper handling
  • The operator is responsible for proper installation
  • Local regulations and VDE provisions must be complied with
  • Never exceed the rated power
  • Never exceed the rated voltages and currents
Required Expertise
  • Use of measuring instruments (multimeter, oscilloscope) and evaluation of measurement results
  • Safe handling of high voltages (up to 500V and more)
  • Reading and understanding circuit diagrams
  • Selection of appropriate tools
  • Knowledge of electrical components and their characteristics
  • First-aid knowledge for electrical accidents
  • Knowledge of VDE regulations and safety requirements
Specific Safety Instructions by Component Groups

Amplifier Tubes
  • Hazard due to high voltages
  • Hazard due to very high heat generation
  • Hazard due to glass breakage
  • Hazard due to UV radiation in case of defective tubes
Transformers & Chokes
For qualified personnel only! Installation and removal of power transformers, chokes, output transformers, and switching power supplies may only be carried out by qualified specialists.
  • Hazard due to high voltages
  • Risk of electric shock
  • Hazard due to heavy weight
  • Risk of injury
  • Fire hazard in case of overload
Capacitors
  • Explosion hazard if electrolytic capacitors are connected with incorrect polarity
  • Never exceed the rated operating voltage
  • Hazard due to high voltages
  • Risk of electric shock
  • Capacitors can store voltage for hours
Resistors
  • Hazard due to high heat generation
  • Hazard due to high voltages
  • Fire hazard in case of overload
  • Hazard due to hot surfaces
  • Risk of burns
Fuses
  • Replace only with identical ratings
  • Never bypass or "repair" a fuse
  • Identify the cause of fuse failure before replacement
  • Fire hazard when using incorrect fuse ratings
Relays & Switches
  • Hazard due to switching sparks
  • Contact damage in case of overload
  • Fire hazard due to defective contacts
Potentiometers & Rotary Switches
  • Hazard due to high voltages at the contacts
  • Fire hazard in case of overload
  • Mechanical damage may lead to short circuits
Diodes & Rectifiers
  • Hazard due to high voltages
  • Heat generation
  • Risk of burns
  • Observe correct polarity
  • Malfunction in case of incorrect polarity
  • Heat sinks required for power diodes
Sockets, Connectors & Cables
  • Hazard due to high voltages
  • Check insulation for damage
  • Ensure proper strain relief
  • Fire hazard due to undersized cables
  • Touch protection required for high-voltage connectors
Heat Sinks & Fans
  • Risk of burns due to hot surfaces
  • Risk of mechanical injury from moving fans
  • Electrical hazard in case of defective fan motors
Circuit Boards & Turret/Lug Terminals
  • Hazard due to sharp edges
  • Fire hazard during soldering
  • Hazard due to solder fumes
  • Adequate ventilation required
  • Observe ESD protection
Housing Parts & Mounting Hardware
  • Risk of injury due to sharp edges
  • Electrical safety must be ensured
  • Observe proper grounding
  • Provide adequate ventilation openings
  • Ensure protection against contact with live parts
Measuring Instruments & Indicators
  • Hazard due to high voltages in analog instruments
  • Fragile glass front
  • Risk of injury
Manufacturer
Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

JJ 6L6 - #19 - Mesa GREEN - GRAY
JJ 6L6 - #19 - Mesa GREEN - GRAY

JJ 6L6 - #19 - Mesa GREEN - GRAY

  • Corresponds to Mesa Color Code GREEN - GRAY
  • Price for one tube.
  • Very Strong !
FAQ: If I order two or more of these tubes, are they all "matched"?
Yes, the tubes are all "matched" and selected for the above amplifiers.

FAQ: Can I change the tubes myself or does anything need to be adjusted?
Adjustment work is not possible on the above amplifiers (unless a bias adjustment has been retrofitted). The exchange can therefore be done without any adjustment or measurement work.

Files:

31,00 €
F+T 220 µF @ 350 Volt, axial
F+T 220 µF @ 350 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 220 µF
  • Voltage Rating: 350 V
  • Tolerance: - 10%+30%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 25 mm x 38 mm
  • Termination Style: axial
6,65 €
Elektrolyt 1000 µF @ 25V
Elektrolyt 1000 µF @ 25V
  • Type: Electrolytic can capacitor
  • Capacitance: 1000 µF
  • Voltage Rating: 25 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 10 mm x 19 mm
  • Termination Style: radial
  • Grid: 5

Images are for reference only. See Product Specifications

0,29 €
Mallory Elektrolyt 1 µF @ 63 V - axial
Mallory Elektrolyt 1 µF @ 63 V - axial
  • Electrolytic capacitors, insulated aluminum can
  • Capacitance: 1 µF
  • Voltage Rating: 63 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 5 mm x 11 mm
  • Termination Style: axial
  • Mallory Vishay

Images are for reference only. See Product Specifications

1,89 €
F+T 220 µF @ 63 Volt, axial
F+T 220 µF @ 63 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 220 µF
  • Voltage Rating: 63 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 10 mm x 25 mm
  • Termination Style: axial
1,75 €
F+T 33 µF @ 500 Volt, axial
F+T 33 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 33 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 39 mm
  • Termination Style: axial
3,95 €
Elektrolyt 10 µF @ 63 V
Elektrolyt 10 µF @ 63 V
  • Type: Electrolytic capacitor
  • Capacitance: 10 µF
  • Voltage Rating: 63 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 5 mm x 11 mm
  • Termination Style: axial

Images are for reference only. See Product Specifications

0,65 €
JJ 12AX7 / ECC83S
JJ 12AX7 / ECC83S

Sweet and warm sounding preamp tube with high gain. We recommend this tube for guitar/bass amps.

Files:

16,90 €
Powerswitch Marshall JCM Series, DPST ON-OFF
Powerswitch Marshall JCM Series, DPST ON-OFF
  • Type: Powerswitch, Marshall JCM Series
  • Rating: 250 V AC @ 20 A
  • Version: DPST, ON-OFF
  • Recess: 28.5 x 23 mm, Snap-in mount
  • Termination Style: solder-lugs, quick connect terminals
9,50 €
Tube-Clip Octal
Tube-Clip Octal

Socket Clamp / Tube Retainer fits for many octal base tubes.

0,75 €
JJ EL34 Red Label - QUAD
JJ EL34 Red Label - QUAD

4 tubes, matched as quad

Standard EL34 made by JJ with a smooth and dizzy sound.

Limiting Values:

  • Ua0: 2000 V
  • Ua: 800 V
  • Wa(max): 25 W
  • Ug20: 800 V
  • Ug2: 450 V
  • Wg2(max): 8 W
  • Ik: 150 mA
  • Uk/f: 100 V
  • Rk/f: 20 kΩ
Files:
92,80 €
23,20 € per Piece
Elektrolyt 4.7 µF @ 63V
Elektrolyt 4.7 µF @ 63V
  • Type: Electrolytic can capacitor
  • Capacitance: 4.7 µF
  • Voltage Rating: 63 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 105 °C
  • Dimensions: Ø 5 mm x 11 mm
  • Termination Style: radial
  • Grid: 2

Images are for reference only. See Product Specifications

0,16 €
Elektrolyt 3,3 µF @ 63V
Elektrolyt 3,3 µF @ 63V
  • Type: Electrolytic can capacitor
  • Capacitance: 3,3 µF
  • Voltage Rating: 63 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 105 °C
  • Dimensions: Ø 4 mm x 7 mm
  • Termination Style: radial
  • Grid: 1,5

Images are for reference only. See Product Specifications

0,25 €
Elektrolyt 22 µF @ 63V
Elektrolyt 22 µF @ 63V
  • Type: Electrolytic can capacitor
  • Capacitance: 22 µF
  • Voltage Rating: 63 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 105 °C
  • Dimensions: Ø 6 mm x 11 mm
  • Termination Style: radial
  • Grid: 2,5

Images are for reference only. See Product Specifications

0,10 €
Elektrolyt 1 µF @ 63V
Elektrolyt 1 µF @ 63V
  • Type: Electrolytic can capacitor
  • Capacitance: 1 µF
  • Voltage Rating: 63 V
  • Tolerance: - 20 % / +20 %
  • Operating Temperature Range: - 40°C / + 105 °C
  • Dimensions: Ø 5 mm x 11 mm
  • Termination Style: radial
  • Grid: 2

Images are for reference only. See Product Specifications

0,07 €