Main page » Components » Cables + Wires » Silicon Wires » Wire Silicon 0,25 mm² - green, 5 m

Wire Silicon 0,25 mm² - green, 5 m

Product No.:: sil025-g
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.027 kg per piece

2,35 €
0,47 € per m

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Information about the manufacturer

Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Speaker Cable MERIDIAN MOBIL SP215 - 2 x 1,5 mm², black - 2 Meter

Were raw force reigns...

the sound technicians are at work and do not have the time to handle cables with tender love and care. This robust cable is especially intended for speakers and satifies all special technical demands. The oxygen-free copper strand provides better sound and more durability.
All PVC-versions are easy to wind. Versions SP215 and SP225 are now available with highly flexible 0.15 mm copper stranding!
New are the versions in FRNC and E30 (IEC 228, IEC 332-/1, IEC 332-3 Cat C, IEC 60331, IEC 61034-1/2, IEC 60754-2)

THE ADVANTAGES:

Flexible and easily windable
Small diameter
Great durability through the use of a special jacket mixture
Very affordable

THE APPLICATION:

All types of sound systems
For fixed installation
Wiring of HiFi-systems

TECHNICAL DATA:

Construction (2LIY1.50mm²)Y
Diameter 6,8 mm
AWG 16
No. of conductors 2 x 1,5 mm²
Jacket material, insulation PVC
Copper strand per conductor 84 x 0,15 mm
Conductor insulation, diameter 2,62 mm
Temperature range min. -30 °C
Temperature range max. 70 °C
Fire load per m 0,28 kWh
Weight per 1 m 78 g
Color black

ELECTRICAL DATA:

Capac. cond./cond. per 1 m 150 pF
Cond. resistance per 1 km < 13 Ohm
Insulat. resistance per 1 km > 5 MOhm

3,95 €
1,98 € per m

TT 12AT7 / ECC81 - Balanced

TT Selection: Balanced
Both systems with balanced gain

Warm and balanced overall sound, paired with high resolution and brilliance, which is why the TT12AT7 achieves the best results in both instrumental and audio/high-end amplifiers.

Features:

Warm and balanced sound
Excellent sound resolution and brilliance
Ideal for instrumental and audio/high-end amplifiers

Hint;
Often, 12AU7 and 12AT7 types are used instead of 12AX7 tubes in order to either reduce the overall power of the amplifier or just take back the overdrive of the preamp. Especially the 12AU7 brings a very large tonal difference compared to a 12AX7, which is usually much greater than when switching from a 12AX7 to 5751 or 12AT7.

When using a 12AU7 in a driver stage that is normally designed for 12AX7, the overall power of the power amp is usually reduced. How big this difference is depends on the amplifier or circuit. For example, a Marshall with a 12AX7 in the phase inverter stage set to volume 5 will then reach the same volume with a 12AU7 set to volume 6 (perceived volume, not measured).

Electrical Characteristics

Heater Voltage (Uf): 6.3V or 12.6V
Heater Current (If): 300mA at 6.3V, 150mA at 12.6V
Anode Voltage (Ua): Maximum 300V
Grid Voltage (Ug1): -2V (typical)
Anode Current (Ia): 10mA (typical)
Anode Power Dissipation: Maximum 2.5W per triode
Anode Resistance (ra): 11kΩ
Amplification Factor (μ): 60
Transconductance (S): 5.5mA/V
Input Capacitance (Cin): 1.6pF
Output Capacitance (Cout): 1.6pF

Mechanical Characteristics

Socket: B9A (Noval)
Number of Pins: 9

Pin Configuration

1 Anode (Triode 1)
2 Grid (Triode 1)
3 Cathode (Triode 1)
4 Heater (f)
5 Heater (f)
6 Anode (Triode 2)
7 Grid (Triode 2)
8 Cathode (Triode 2)
9 Center Heater (f)

Application Notes

Heater Operation: The tube can be operated with either 6.3V or 12.6V, depending on the circuit design.
Grid Resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable operation.
Coupling Capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high frequency disturbances.

18,20 €