Wire Silicon 0,25 mm² - black, 5 m
Wire Silicon 0,25 mm² - black, 5 m

Wire Silicon 0,25 mm² - black, 5 m

Product No.:
sil025-s
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.026 kg per piece
2,35 €
0,47 € per m

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

JJ EL84 #05 - Fender Blues Junior

JJ EL84 #05 - Soft Plus

  • Not so hot than the #06 selection but still nice punch
  • Recommended for Fender Blues Junior and Pro Junior and similar amps.
  • Price for one tube.
FAQ: If I order two or more of these tubes, are they all "the same"?
Yes, the tubes are all "matched" and selected for the in the description mentioned amplifier.
FAQ: Can I replace the tubes myself or are adjustments needed?
Adjustments are not possible on the listed amplifier (unless a bias potentiometer has been added afterwards). The replacement can therefore be done without adjustments.
18,00 €
Sovtek 12AX7 / ECC83 WA

The Sovtek 12AX7WA is a defacto standard in 12AX7 tubes for many years yet because of its high dependability and its low noise floor.

18,50 €
TT Potentiometer 16 mm 100k lin
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €
TT Potentiometer 16 mm 500k log
TT Potentiometer Made by Alpha

Electrical Characteristics
  • Total Resistance Tolerance: +/- 20%
  • Rated Power
    • B/Lin Taper: 0,125 W
    • A/Log Taper: 0,1 W
  • Max. Operating Voltage
    • B/Lin Taper: 150 V AC
    • A/Log Taper: 150V AC
  • Noise: 47 mV max.
  • Insulation Resistance: 500 V DC 1000MOhm
  • Withstand Voltage: 1 minute 500 V AC
  • Rotational Life: 15000 Cycles
Mechanical Characteristics
  • Shaft Diameter 6 mm
  • Shaft Type: Split Shaft
  • Shaft Length: ca. 9 mm
  • Bushing Length: 6,5 mm
  • Body Diameter: 16 mm
  • Connectors: Solder Lugs
  • Total Rotational Angle: 300° +/- 5°
  • Rotational Torque: 30~200gf.cm
  • Solder Heat Resistance: 300°C, 3 S
Material
  • Shaft: Cast Iron (Aluminium Zinc)
  • Bushing Material: Cast Iron
0,75 €