Tube-Town GmbH

Faceplate for TT Kit YAH100

• Color #C01 black/white
• Material: 1,5 mm Transply
• Front and Rear panel

Files:

• Template

Mounting set for case handles with 4 holes consisting of

•     4 x T-Nut M4
•     4 x Countersunk screw M4x25 mm, nickel-plated

Set of componentes for building the TT LX18 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

• Tube-Town Powertransformer, Primary 0-120-230-240V @ 50/60 Hz
• Tube-Town Outputtransformer
• Resistors
• Capacitors
• Jacks
• Light
• Wires
• Board
• Switches
• Tubes
• Fuses & Fuesholder

NOT INCLUDED:

• Chassis
• Knobs
• Faceplate

We use high quality components for this kit, which are all tested. The kit is offered as is. If other components are desired, then these must be purchased in addition to the kit.

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

... check out Captain Crap's YouTube Sounddemo of the LX18

Faceplate for TT LX18

• Material: 1.5 mm Transply
• Color: black / white
• Front and rear panel

Files:

• Template LX18

Fabric with thick structure, striking color but not annoying, all you need for a "fresh" look.

• Size (W x L): ca. 75 x 100 cm (only available in this size)
• Material: 100% treated paper
• Price per pcs.
• Actual shades may vary.

Further information and notes on Grillcloth

• FAQ Grillcloth

Faceplate for TT Chassis-069 - 5F2

• Color: #C16 silver brushed / black
• Material: 1.5 mm Transply

Files

• Template as PDF

Set of componentes for building the TT 5F2 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

• Chassis
• Faceplate
• Transformers
• Resistors
• Capacitors
• Jacks
• Light
• Wires
• Board
• Switches
• Tubes
• Fuses & Fuesholder

NOT INCLUDED:

• Knobs
• Headshell or Combo

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

Color: #D01 schwarz / weis
Material: 0.8 mm Transply

• Tube-Town EZ-Board 5E3
• Size: 230 x 71 mm
• Material: 2 mm FR, black
• Can be used as an eyelet board or can be equipped with turrets and used as turret board
• On-board connections already available
• Same board used for the TT-5E3 kits

TT 5Ä3 Upgrade Kit - to upgrade 5Ä3 version MkI to MkII
More details about the upgrade as well as schematic and layout can be found on the >>Project page.

INCLUDED:

• Resistors
• Capacitors
• Wires
• Board

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

Specification label. Self adhesive. 50 x 80 mm. Aluminium with satin black print. German text.

Faceplate for TT Amp-Kit Spit F.

• Color: #C08 black / gold
• Material: 1.5 mm Transply
• Front + Rear Panel
• For up side down mounting of the amplifier in a headshell

Files:

• Template

Platine zum LND150 Boost Forums-Projekt: https://www.tube-town.de/ttforum/index.php/topic,24332.105/topicseen.html#lastPost

• Größe: 51,7 x 29,2 mm
• Material: 1,6 mm FR, rot

Size of sample ca: 9 x 9 cm
Actual shades may vary.

Material:
80% PVC Film
20% Poly-Cotton Fibre

REACH compliant

• Length: 51 mm
• Size: 2 mm