Main page » Tube-Town

Tube-Town GmbH

Tube-Town

Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de

Tube-Town EZ-Board Marshall 18 Watt, black with Turrets

Ready-to-use Turret board
Größe: 257 x 67 mm
for building a Marshall 18Watt Style amp

12,80 €

incl. VAT excl. Shipping costs

piece:

Cable Clamps, plastic, 6,3 mm

screw-mount for internal installation.
White
Material PA 6.6
max. harness diameter: 6,3 mm

0,29 €

incl. VAT excl. Shipping costs

piece:

Cable Clamps, plastic, 9,5 mm

screw-mount for internal installation.
White
Material PA 6.6
max. harness diameter: 9,5 mm

0,48 €

incl. VAT excl. Shipping costs

piece:

Cable Clamps, plastic, 12,7 mm

screw-mount for internal installation.
White
Material PA 6.6
max. harness diameter: 12,7 mm

0,39 €

incl. VAT excl. Shipping costs

piece:

Tolex Tube-Town Brown Taurus

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

80% PVC film
20% polyester-cotton fabric
REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.

24,90 €

incl. VAT excl. Shipping costs

meter:

Unsoldering pump, non-static

Desoldering pump for removing soldering tin, non-static, dimensions: 230mm x 25mm. EXTRA STRONG.

4,50 €

incl. VAT excl. Shipping costs

piece:

Cable tie mounts, adhesive, 20x20mm, 10pcs, for Cable ties up to 4,8mm.

0,69 €

incl. VAT excl. Shipping costs

piece:

Signal wire LiYDY 1 x 0,5 mm², shielded - 2 m

Signal wire LiYDY 1 x 0,5 mm², shielded
Diameter Outside: ca. 3,2 mm
Voltage Rating max: 250 V
Capacity: ca. 260 pF / m
Temperature range: -10 bis +70 C°
Conductor resistance: 40 Ohm / km @ 20 C°
Test voltage: > 1 kHz
IEC 60228/ VDE 0295
Length: 2 m

2,20 €
1,10 € per m

incl. VAT excl. Shipping costs

piece:

NF Signal wire 2 x 0,14 mm² shielded, 2m

NF Signal wire LiYDY 2 x 0,14 mm² shielded

Diameter Outside: ca. 4 mm
Voltage Rating max. 250 V
Temperature range: -10 bis +70 C°
Conductor resistance: 135 Ohm / km @ 20 C°
Insulation resistance: min. 20 MOHm x km @ 20 C°
Length: 2m

2,30 €
1,15 € per m

incl. VAT excl. Shipping costs

piece:

Cable Clamps, plastic, 17,5 mm

screw-mount for internal installation.
White
Material PA 6.6
max. harness diameter: 17,5 mm

0,52 €

incl. VAT excl. Shipping costs

piece:

TT-Kit Marshall® Style 18 Watt

Marshall® Style 18W Amp Kit, Point-to-Point

Set of componentes for building the TT 18W Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout and if you want to build a 18 Watt combo than check the >>Project page of the Combo too

INCLUDED:

Transformers (Power and Output, tt-ma18pw-INT and Hammond 1750PA)
Resistors
Capacitors
Jacks
Light
Wires
Board
Switches
Tubes
Fuses & Fuesholder

NOT INCLUDED:

Chassis - please order the chassis which you want. The chassis tt-ch024 should be used for a head version of the amp and the chassis tt-ch026 for a combo build.
Knobs
Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

360,00 €

incl. VAT excl. Shipping costs

piece:

Signal wire LiYDY 1 x 0,14 mm², shielded, 5m

Signal wire LiYDY 1 x 0,14 mm², shielded
Diameter Outside: ca. 2,6 mm
Voltage Rating max: 50 / 75 V AC / DC
Capacity: ca. 260 pF / m
Temperature range: -10 bis +70 C°
Conductor resistance: 40 Ohm / km @ 20 C°
Test voltage: > 1 kHz
IEC 60228/ VDE 0295
5 meter

4,20 €
0,84 € per m

incl. VAT excl. Shipping costs

piece:

Signal wire LiYDY 1 x 0,14 mm², shielded, 2m

Signal wire LiYDY 1 x 0,14 mm², shielded
Diameter Outside: ca. 2,6 mm
Voltage Rating max: 50 / 75 V AC / DC
Capacity: ca. 260 pF / m
Temperature range: -10 bis +70 C°
Conductor resistance: 40 Ohm / km @ 20 C°
Test voltage: > 1 kHz
IEC 60228/ VDE 0295
2 meter

1,70 €
0,85 € per m

incl. VAT excl. Shipping costs

piece:

Mini-Toggle Switch DPDT - 2 postion ON-OFF-ON

Type: Toggle Switch
Version: DPDT, ON-OFF-ON
Rating: 3 A / 250VAC, 6 A / 125VAC
Drill Ø: 6 mm
Termination Style: solder-lugs

0,80 €

incl. VAT excl. Shipping costs

piece:

Faceplate for TT Amp-Kit 18Watt - Gold GLOSSY

Faceplate for TT Amp-Kit 18Watt

Color: #LG10 Gold GLOSSY lacquered
Material: 1,5 mm Acryl Revers
Front + Rear Panel

Files:

Template

34,90 €

incl. VAT excl. Shipping costs

piece:

Kit Dumbleator

This is a kit of the famous Dumbleator, can be used as standalone device or for installation in an existing amplifier.

When build as a stand-alone device, the kit can be powered with the TT-VPump, in an amplifier the kit must be supplied via the existing power supply of the amp.

The Dumbleator offers numerous configuration options which are shown in the appended schematics.

Input Levels:
InA: 10-15 Vpp
InB: guitar level - 5 Vpp

The kit includes all the parts needed to build the "standard version" incl. a 12AX7, potentiometers and leads.
It does not include components that are required for the building the extended versions, as well as a power supply or casing.

The Dumbleator utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files: