Tube-Town GmbH

Tube-Town
Tube-Town
Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de
TT Powertrafo EI 30VA

TT Powertransformer

  • Pri: 0-120V / 0-110V-120V @ 50Hz
  • Sec1: 200 V @ 0,1 A
  • Sec2: 6,3 V @ 1,6 A
  • Power: 30 VA
  • Size: ca. 70 x 60 x 65 mm
Files:
43,90 €

incl. VAT excl. Shipping costs
piece:
 
Fender Style Reverb Driver 3,5 W 125A20B
Reverb Driver, Fender Style, direct replacement for item 125A20B
  • Power: 3,5 W
  • 4 Ohm @ 14k5
  • 8 Ohm @ 29k
11,90 €

incl. VAT excl. Shipping costs
piece:
 
Tube-Town EZ-Board 2-Way Channel Switch
  • Tube-Town EZ-Board
  • for channel switching etc.
  • Size: 65 x 43 mm

For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).
PCB only, no components included. Please see the datasheet for possible setup.

Files:

1,20 €

incl. VAT excl. Shipping costs
piece:
 
TT 36 Watt Outputtransformer for Marshall 36 Watt / 4-8-16 Ohm
  • Primary: 4 kOhm
  • Secondary: 4, 8 and 16 Ohm
  • Power: 36 Watt
  • Made in Europe

Files:

88,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit Seriel FX-Loop LND150

Active, serial FX-Loop for a subsequent installation in an existing tube amplifier
The FX-Loop works with  two LND150 in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

24,50 €

incl. VAT excl. Shipping costs
piece:
 
TT-CK03 Choke 3 H
Technical Data:
  • Inductance: 3 H

Files:

28,50 €

incl. VAT excl. Shipping costs
piece:
 
Kit Tube FX-Loop 6112

Kit of an active, serial tube-driven FX-Loop (with parallel option) for a subsequent installation in an existing tube amplifier
The FX-Loop works with one 6112 miniature tube in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

Heater:
6,3 V @ 300 mA

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

36,00 €

incl. VAT excl. Shipping costs
piece:
 
TT Powertransformer VOX® Style AC30 - Vertical
  • Pri.: 0-115V-230V-240V (50Hz)
  • Sec.1: 560V C.T. @ 160mA
  • Sec.2: 6,3V C.T. @ 6A
  • Sec.3: 0-5V @ 3A
  • Made in Europe
Files:
128,00 €

incl. VAT excl. Shipping costs
piece:
 
TT Output transformer, 10 Watt, push-pull - Vertical
Outputtransformer for projects with i.e. ECC99 tubes
Same specs as the tt-ot10 but for vertical mount
  • Pri.: 15 kOhm C.T.
  • Sec.: 4-8-16 Ohm
  • Power: 10 W (35Hz -3dB)
Files:
38,50 €

incl. VAT excl. Shipping costs
piece:
 
Tolex Tube-Town Carbon Fiber black / schwarz  SAMPLE
Size of sample ca: 9 x 9 cm
Actual shades may vary.

Material:
80% PVC Film
20% Poly-Cotton Fibre

REACH compliant
0,35 €

incl. VAT excl. Shipping costs
piece:
 
TT-Slo100 Soldano® SLO 100 Watt Output Transformer
Technical Data:
  • Primary Imp.: 2.2 kOhm
  • Primary Ind.: 18.5 H
  • Secondary: 4, 8 and 16 Ohm
  • Power: 100 Watt

Files:

119,00 €

incl. VAT excl. Shipping costs
piece:
 
577 to 600 (from a total of 1597)
Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de