Speaker Clamp

Black Speaker Grille with Lightweight Welded PVC Surround
8 mm Square Hole on 11.5mm Pitch Mesh

• Material: Steel
• Material Thickness: 0.7mm
• Weight: 366g
• Diameter: 30.9cm
• mounting brackets NOT included

Black Speaker Grille with Lightweight Welded PVC Surround
8 mm Square Hole on 11.5mm Pitch Mesh

• Material: Steel
• Material Thickness: 0.7mm
• Weight: 252 g
• Diameter: 260 mm
• mounting brackets NOT included

Black Speaker Grille with Lightweight Welded PVC Surround
8 mm Square Hole on 11.5mm Pitch Mesh

• Material: Steel
• Material Thickness: 0.7mm
• Weight: 544 g
• Diameter: 385 mm
• mounting brackets NOT included

Set of metal corners for housing consisting of:

• 8 x Cabinet corner w/ cutaway 2 leg, silver (pe-c1824k)
• High Quality
• Powder Coated black
• Internal radius: 12 mm
• 16 x Screws, flat head, black

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

• Safety Datasheet

• Rubber foot with steel insert
• Size: d = 25 mm, h = 11 mm
• Pack of 4
• Screws included

• Mesh, black
• Size: 660 x 150 mm
• Meshsize: 12 x 6 x 1 x 0,5 mm
• Net Weight: ca. 150 g

Handle with nickel plated end plates 

• Marshall Style
• Heavy Duty
• Plastic covered with steel inner core
• Black
• Screws and t-nuts included

Were raw force reigns...

the sound technicians are at work and do not have the time to handle cables with tender love and care. This robust cable is especially intended for speakers and satifies all special technical demands. The oxygen-free copper strand provides better sound and more durability.
All PVC-versions are easy to wind. Versions SP215 and SP225 are now available with highly flexible 0.15 mm copper stranding!
New are the versions in FRNC and E30 (IEC 228, IEC 332-/1, IEC 332-3 Cat C, IEC 60331, IEC 61034-1/2, IEC 60754-2)

THE ADVANTAGES:

• Flexible and easily windable
• Small diameter
• Great durability through the use of a special jacket mixture
• Very affordable

THE APPLICATION:

• All types of sound systems
• For fixed installation
• Wiring of HiFi-systems

TECHNICAL DATA:

• Construction (2LIY1.50mm²)Y
• Diameter 6,8 mm
• AWG 16
• No. of conductors 2 x 1,5 mm²
• Jacket material, insulation PVC
• Copper strand per conductor 84 x 0,15 mm
• Conductor insulation, diameter 2,62 mm
• Temperature range min. -30 °C
• Temperature range max. 70 °C
• Fire load per m 0,28 kWh
• Weight per 1 m 78 g
• Color dark gray

ELECTRICAL DATA:

• Capac. cond./cond. per 1 m 150 pF
• Cond. resistance per 1 km < 13 Ohm
• Insulat. resistance per 1 km > 5 MOhm

YAH100 - Kit based on the HiWatt DR103

This kit contains all parts for building the TT YAH100 including chassis, faceplate and knobs.
NOT included is a headshell.
More details about the amplifier can be found on the >>Project page.

Please note, very important and is really meant like this: To rebuild the amplifier you need electrical engineering knowledge, experience with high voltages, as well as reading and understanding schematics and handling measuring instruments.
There is no step-by-step guide for beginners. The circuit and layout plan contains all relevant information

Bass reflex tuning port, Ø 100 mm, black plastic.
Length: 4" / 111.5 mm