TT Diffusor 12" - Standard
TT Diffusor 12" - Standard

TT Diffusor 12" - Standard

Product No.:
tt-diff12
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
1 kg per piece
15,85 €

incl. VAT excl. Shipping costs

Needed for:

Jensen P12R - 12" / 25 W / 4 Ohms

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

 Technical Details:

  • Size: 12"
  • Impedance: 4 Ohm
  • Rated Power (RMS): 25 W
  • Sensitivity @ 1 W, 1 m: 95 dB
  • Resonance Frequency  fs: 80 Hz
  • Bell: No Bell

Files:

109,00 €

Jensen C12Q 8 Ohms

CERAMIC Vintage

The JENSEN® "C" series speakers were developed because the world's supply of cobal (Co in AlNiCo) slump, making this raw material more expensive. While ceramic magnets are larger in size than comparable AlNiCo magnets of the same gauss strenght, their cost is lower. "C" series JENSEN® speakers use same cones and voice coils comparable to our AlNiCo series speakers, thus providing a similar tone but at a reduced price.

Technical Details:    

  • Size: 12"
  • Impedance: 8 Ohm
  • Rated Power (RMS):35 W
  • Sensitivity @ 1 W, 1 m:    94,6 dB
  • Resonance Frequency  fs: 87,3 Hz
Files:  
75,00 €

Jensen P10Q - 8 Ohms

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

 Technical Details:

  • Size: 10"
  • Impedance: 8 Ohm
  • Rated Power (RMS): 40 W
  • Sensitivity @ 1 W, 1 m:    93,8 dB
  • Resonance Frequency  fs: 89,9 Hz
  • Bell: No Bell

Files:

135,00 €

Celestion G15V-100 Fullback - 15" / 100 W / 8 Ohm - MADE IN UK
With a larger cone delivering an extended low end response the 100-watt Fullback has a big deep voice delivering smooth and expressive tones seemingly without effort.
While retaining our classic harmonically complex and finely detailed mid-range the larger 15 cone of the Fullback shifts this characteristic down a register. Clean sounds are warm and expressive revealing and enhancing the
qualities of your amp and guitar without unnecessary colouration. Overdrive sounds are complex and musical; push harder for a weighty contralto growl with a softer warmer mid-range.
Incorporating an eight hole chassis the Fullback is the ideal choice whether you’re looking for the perfect upgrade for your 15 combo or you’re looking for an interesting tonal alternative to a 12 guitar speaker.

Specifications
  • Nominal diameter 381mm / 15"
  • Power rating 100W
  • Rated impedance 8Ω or 16Ω
  • Sensitivity 99dB
  • Chassis type Pressed steel
  • Magnet type Ceramic
  • Magnet weight 1.42kg / 50oz
  • Voice coil diameter 2in / 50mm
  • Voice coil material Round copper
  • Frequency range 65-4000Hz
  • Resonance frequency, Fs 85Hz
  • DC resistance, Re 6.4Ω
Mounting Information
  • Cut-out diameter 351mm / 13.8in
  • Diameter 385mm / 15.2in
  • Magnet structure diameter 156mm / 6.1in
  • Mounting hole dimensions 9.2x7.9mm / 0.36x0.24in
  • Mounting hole PCD 369mm / 14.6in
  • Number of mounting holes 8
  • Chassis depth (inc gasket) 117mm / 4.58in
  • Magnet depth 36mm / 1.42in
  • Overall depth 152.9mm / 6.0in
  • Unit weight 4.8kg / 10.6lb
170,00 €

Celestion A-Type - 12" / 50W / 16 Ohm
Celestion guitar speakers have been an important part of British guitar tone since the birth of Rock & Roll.
Traditionally they’re known for lively and vocal midrange character with plenty of sparkle and chime which turns into an exciting growl when overdriven often compressing when pushed hard.
Inspired by our favourite modern American tones the A-Type is a different kind of guitar speaker from Celestion.
Of course it still has the musical and revealing three- dimensional quality that is the heart and soul of a Celestion guitar speaker however it
features a more laid-back midrange which reveals body and complexity in the upper register accompanied by full and rounded low frequencies.

The A-Type conveys a fluid even performance with an increased headroom threshold that allows your amp’s tone to shine through.
Clean players will love the smooth articulation; for rockers the brooding powerful low end threatens thunder that’s only a heavy riff away!

Specifications
  • Nominal diameter 305mm / 12in
  • Power rating 50W
  • Rated impedance 8Ω or 16Ω
  • Sensitivity 98dB
  • Chassis type Pressed steel
  • Magnet type Ceramic
  • Magnet weight 0.99kg / 35oz
  • Voice coil diameter 1.75in / 44mm
  • Voice coil material Round copper
  • Frequency range 75-5000Hz
  • Resonance frequency, Fs 75Hz
  • DC resistance, Re 6.2Ω&12.7Ω

Mounting Information
  • Cut-out diameter 283mm / 11.1in
  • Diameter 309mm / 12.2in
  • Magnet structure diameter 145mm / 5.7in
  • Mounting hole dimensions 7.9mm / 0.31in Ø
  • Mounting hole PCD297mm / 11.7in
  • Number of mounting holes 8
  • Chassis depth (inc gasket) 94mm / 3.70in
  • Magnet depth 33mm / 1.30in
  • Overall depth 130mm / 5.1in
  • Unit weight 3.5kg / 7.7lb
109,00 €

Jensen Jet Neodym 12/100 Stealth 12" / 100 W / 16 Ohm

Crystal clear clean tones, accented by shimmering highs with each note sounding tight and well defined.
When presented with overdrive distortion, the notes remain well defined with lots of bite.

Specifications

  • Nominal Diameter: 307 mm (12")
  • Nominal Impedance: 8 Ω
  • Rated Power AES (1): 100 W
  • Continuous Program Power (2): 200 W
  • Sensitivity @ 1W/1m: 98.5 dB
  • Voice Coil Diameter: 50 mm
  • Voice Coil Winding Depth: 10 mm
  • Magnetic Gap Depth: 8 mm
  • Flux Density: 1.20 T
  • Magnet Weight: 200 g
  • Net Weight: 2.2 kg

Thiele & Small Parameters

  • Re: 6.81 Ω
  • Fs: 72.0 Hz
  • Qms: 9.51
  • Mms: 29.9 g
  • Qts: 0.52
  • Bxl: 12.93 Tm
  • Cms: 163 μm/N
  • Sd: 490.9 cm2
  • Vas: 55.9 l
  • Le (1kHz): 0.70 mH
200,00 €

Celestion Neo 250 Copperback 12" / 250W / 4 Ohm - MADE IN UK
Sacrificing none of the delicious musicality of your favourite Celestions the Copperback supplies tons of tone without the signature cone break-up immediately associated
with the classic Celestion growl. Rated at a monstrous 250-watts the Copperback works together with your amp to provide unparalleled dynamics delivering
all the headroom and touch sensitivity you could possibly need. Not only that, you get all this power and tone weighing in at a modest 5lb (2.3kg).

It’s definitely not the “brown sound” but for those wanting more transparency and less midrange vocal intensity the Copperback reveals the best from your
amplifier and playing without additional colouration. The speaker’s unique response has a tight low-end, neutral low-mids a clear open upper-mid definition
and well-controlled high treble meaning you can shift from shimmering tubular-bell-like cleans to “flute-like” high gain with simply a tweak of the drive knob.

Specifications
  • Nominal diameter 305mm / 12in
  • Power rating 250W
  • Rated impedance 4Ω, 8Ω or 16Ω
  • Sensitivity 100dB
  • Chassis type Pressed steel
  • Magnet type Neodymium
  • Magnet weight 1.42kg / 50oz
  • Voice coil diameter 2.5in / 63mm
  • Voice coil material Round copper
  • Frequency range 70-5500Hz
  • Resonance frequency, Fs 55Hz
  • DC resistance, Re 3.5Ω, 7.2Ω & 13.9Ω

Mounting Information
  • Cut-out diameter 283mm / 11.1in
  • Diameter 309mm / 12.2in
  • Magnet structure diameter 125mm / 4.9in
  • Mounting hole dimensions 7.9mm / 0.31in Ø
  • Mounting hole PCD 297mm / 11.7in
  • Number of mounting holes 8
  • Chassis depth (inc gasket) 97mm / 3.83in
  • Magnet depth 30mm / 1.17in
  • Overall depth 127mm / 5in
  • Unit weight 2.3kg / 5lb
230,00 €

Jupiter 10SA-P Alnico 10" / 15 W / 4 Ohm
TOP
10" seamed cone speaker with a small alnico motor and a paper voice-coil, upgrade replacement for Jensen P10R.

Dimensions:
  • Diameter:  10 1/16"
  • Depth rear mount:  4 5/8"
  • Cut-out hole diameter:  9"
  • Mounting Holes:  1/4"
  • Number of mounting holes:  8
  • Mounting Hole Circle Diameter:  9 3/4"
Specs:
  • Power Handling:  15W
  • Voice Coil Diameter:  1"
  • Magnet:  Small Alnico - 14oz
  • Paper Voice Coil
  • Weight:  4lbs
139,00 €

je-6165

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

 Technical Details:

  • Size: 12"
  • Impedance: 4 Ohm
  • Rated Power (RMS): 40 W
  • Sensitivity @ 1 W, 1 m:    95 dB
  • Resonance Frequency  fs: 90,4 Hz
  • Bell: No Bell

Files:

149,00 €

Customers who bought this product bought also the following products:

Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
4,90 €

Gasket for 12" speakers
  • Foam gasket
  • 4 segements = 1 Ring
  • for 12" guitar and bass speakers
  • Original Celestion
2,90 €

Flat Cable-Plug, Cable Shoe 5,2 x 0,5 mm, Pack of 10
Flat Cable-Plug, Cable Shoe, crimp connection for width max 5,2 x 0,5 mm
  • not insulated
  • Conductor cross section: 1.0 to 2.5 mm²
  • AWG conductor cross section AWG 17 to 14
  • Brass, tin-plated
  • Pack of 10 pcs
1,10 €
0,11 € per Pack

Self tap screw 4.2 X 16 mm black, 25 pcs.
  • Self tap screw
  • flange head
  • 4.2 x 16 mm, black
  • Extra Flat - ideal for the mounting of the corners
  • Pack with 25 pcs.
2,75 €
0,11 € per Piece

Self tap screw 4,5 X 19 mm black
  • Self tap screw
  • flange head
  • DIN 968
  • 4.5 x 19 mm, black
  • Extra Flat - ideal for the mounting of the corners
0,22 €

Wood screw, Pozi drive 3.9x25 mm, black 100 pcs
Dry wall / wood screw
  • with fine thread
  • phosphated, black-gray
  • 3,9 x 25, Stahl
  • PH 2
  • Pack of 100
1,90 €
0,02 € per Piece

Knob Fender Style Vintage, cream
Knob Fender Style Vintage
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 20,3 x 11,8 mm
  • Mounting: Set-Screw with Bras insert
2,75 €

Knob Fender Style Vintage, grey
Knob Fender Style Vintage
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 20,3 x 11,8 mm
  • Mounting: Set-Screw with Bras insert
1,50 €

TT Diffusor 10"

Universal size for 10" speakers
Dome diameter:  80 mm

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

14,75 €

scr307
Screw set for loudspeaker mounting
  • 4 x Screw M5x20mm
  • 4 x Washer M5
  • 4 x T-Nut M5
1,48 €