Strap-Handle, Marshall-Style Vintage, Gold

Empty Smallhead-style amplifier housing with open back for self covering, painting or staining.
The headshell is raw and comes without any other hardware. The dimensions are the same as the normal TTC SmallHead.
Made of 15 mm FinePly plywood, corner radius 12 mm.

Specifications

• Size: 660 x 230 x 210 mm (Outside)
• Chassis-Cutout: 410 x 55 mm
• Weight: ca. 6 kg
• Wood: 15 mm Birch Plywood

[content:3210136]

Dish - Punched for 2 jacks. Material: 1.2 mm Steel, black powder coated.

Cutout 65 x 106 mm. Fixing holes Ø 5 mm. Weight: 125g

Cabinet corner leather black, Set of 4
100 % real letaher, vegetable tanned
Caution: natural product ! The texture and thickness may vary.

Hint: put the corners into water for a few minuties before mounting. This makes them soft and elastic and than they will fit better.
The corners on the chassis should be well rounded too in order to achieve best results.

Screwnail 20 mm

• black
• Pack of 25

Strap Handle, black Marshall  Style
Perfect replacment for the black Marshall handle (MRV18), only the "Marshall" logo is missing

• Plastic covered with steel inner core
• Metal Endcaps w/ Plastic Cover
• Color: Black
• Screws and t-nuts included

 

Handle with nickel plated end plates 

• Marshall Style
• Heavy Duty
• Plastic covered with steel inner core
• Black
• Screws and t-nuts included

PVC piping thin, without lip

• Ø 2.5 mm
• 2 m piece

The 12” ET65™ speakers has big and creamy lows blend with tight midrange and sparkling highs for some of the best tones ever created! This speaker is for classic rock, country, and blues. Upgrade from your Celestion™ G12-65.

Unit Weight:  7.5 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 98.69 Hz
• DC Resistance (Re): 8.05 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 5.38
• Electromagnetic Q (Qes): 1.10
• Total Q (Qts): 0.91
• Compliance Equiv. Vol. (Vas): 16.75 cu ft
• Mech. Compliance of Susp. (Cms): 0.09 mm/N
• BL Product (BL): 11.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.51 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.45 db

2 tubes, matched as pair

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

Files:

• Datasheet