LED 3 mm yellow

Always have the sharpest tool in the box with these precision electronics pliers. The bevel-free cutting edges ensure smooth and sharp cuts, making them perfect for DIY cable, internet, and electrical installations. The offset cutting edges provide special precision and a longer service life, while the non-slip grips offer comfortable handling and improved power transmission. The opening limiter and stainless steel rivet ensure comfortable working and durability, making these pliers a reliable tool for any project.

• Bevel-free cutting edges for smooth and sharp cuts
• Suitable for cutting wires or cables cleanly
• Offset cutting edges for precision and increased service life
• Non-slip grips for comfortable handling and improved power transmission
• Opening limiter for controlled and comfortable work
• Stainless steel rivet and burnished head for long-lasting durability
• Can also be used for stripping cables

• Rubber foot with steel insert
• Size: d = 25 mm, h = 11 mm
• Pack of 4
• Screws included

• Plastic covered with steel inner core
• Steel, black plated end plates
• Black
• Screws and t-nuts included

• Type: Footswitch
• Version: 3PDT Latching
• for True Bypass
• Rating: 1A/9VDC
• Contact resistance: <30mΩ
• Insulation resistance: 500VDC-100MΩ min.
• Dielectric strength: 500VAC for 1 minute
• Operating Life: 30.000 cycles
• Termination Style: solder-lugs

Files:

• Datasheet

TT-Chassis Fender 5F2 Style
Optimized version of the 5F2 chassis for use with a separate power switch, isolated input and output jacks to prevent ground loops, Belton socket, replaceable power cord. Furthermore, this chassis is slightly longer than the original, which makes the work "inside" the chassis easier. Made of aluminum.

• Dimensions: 260 x  65 x 105 mm (W x H x D)
• Material: 2 mm Aluminium

• Datasheet

• Version: High quality Micalex socket
• Chassis mount
• Termination Style: solder lugs
• for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.

• Version: High quality Micalex socket
• Chassis mount
• Termination Style: solder lugs
• for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.

• Type: Toggle Switch
• Version:DPST, ON - OFF
• Rating: 15A / 250VAC, 10A / 400VAC
• Contact resistance: 10 mΩ max. at 1A 2VDC
• Insulation resistance: 1.000 MΩ min. at 500VDC
• Dielectric strength: 2.000 Vrms 50 Hz min.
• Operating Life:    10.000 cycles at full load
• Termination Style: solder lug / quick-connect terminals

• Datasheet

Fuseholder, Chassismount, for 6,3 x 32 mm fuses,

• US-Version
• Drill Ø: 15 mm
• 10A@250VAC
• 15A@125VAC

• 6,3 mm jack
• mono, switched
• Installation diameter: 10 mm

Files:

• Datasheet