Terminal Keystone 827 5+2 solder lugs

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

• Safety Datasheet

• Size: ca. 90 x 75 cm (only available in this size), recommended for baffles with a maximum size of 80 x 60 cm.
• Easy-to-use Grillcloth
• Neutral appearance, medium material thickness
• Material: 94 % Polypropylen, 6 % Acrylic
• Price per pcs.
• Actual shades may vary.

Further information and notes on Grillcloth

• FAQ Grillcloth

The ET10 is the 10” version of one of our most popular speakers: the ET65. The ET10 boasts a tone reminiscent of its 12” counterpart, but with a bit more of a pronounced midrange. The low end from this 10 is surprisingly heady, but remains tight in all situations. Top it off with a smooth but articulate top end, and you have one of the most highly anticipated ten inch speakers to date.

Unit Weight: 6 lbs

Thiele-Small Parameters

• Resonant Frequency (Fs): 113.32 Hz
• DC Resistance (Re): 6.626 Ohm
• Coil Inductance (Le): 0.16 mH
• Mechanical Q (Qms): 6.72
• Electromagnetic Q (Qes): 0.72
• Total Q (Qts): 0.65
• Compliance Equiv. Vol. (Vas): 17.06 cu ft
• Mech. Compliance of Susp. (Cms): 0.11 mm/N
• BL Product (BL): 10.63 T-M
• Diaphragm Mass Inc. Airload (Mms): 17.25 grams
• Surface Area of Cone (Sd): 324.29 cm squared
• Sound Pressure Level (spl): 100.17 db

• Body: 24 mm
• Shaft: 6,35 mm, Split shaft
• PCB
• for JCM 800, 2205, 2210, etc.
• incl. one nut and one washer

• Body: 24 mm
• Shaft: 6,35 mm, Split shaft
• PCB
• for JCM 800, 2205, 2210, etc.
• incl. one nut and one washer

Files

• Drawing

• Body: 24 mm
• Shaft: 6,35 mm, Split shaft
• PCB
• for JCM 800, 2205, 2210, etc.
• incl. one nut and one washer

Files

• Drawing