Diode 1N4148 0,5 @ 75 V

NC3MP

3 pole male receptacle, solder contacts, Nickel housing, silver contacts.
Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.

Features & Benefits

• Smallest available hard wiring receptacles with large solder cups
• Compatible with switchcraft D*M, D*F; Cannon XLB2*31, XLB2*32

Files:

• Datasheet

Size: 100 x 160 mm (Euro-Form)
One-side copper layer: 35 µ
Material: FR2, 1,5 mm
Grid: 2,54 mm
Hole: Ø ca. 1 mm

• Type: Electrolytic can capacitor
• Capacitance: 10 µF
• Voltage Rating: 35 V
• Tolerance: - 20 % / +20 %
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 5 mm x 11.5 mm
• Termination Style: radial
• Grid: 2,0

Images are for reference only. See Product Specifications

Resistor Metaloxide 2 Watts

• +/- 5% tolerance
• -55° C to 240° C operating range
• Max 500 V
• Excellent flame retardant coating
• Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

Microcontroller-controlled MIDI switcher for channel switching or loop switching. Operation can be performed either via MIDI or a footswitch (momentary switch).

!!! UPDATE !!! With the May 2019 update, the following adjustments were made to the module:

• The large relay board has been removed and is no longer included in the kit, as a wide range of different relays with carrier boards is now available, offering much more flexible applications.
• The documentation has been consolidated and is available as a PDF download directly with the kit.
• The microcontroller with the firmware is no longer included in the kit and must be ordered separately depending on the desired version.

These changes allowed us to offer the kit in a more universal, flexible, and cost-effective way. More short information and software on the >>TT-Midi-Switcher project page

Included in delivery:

• Controller board
• Components for 5V onboard power supply
• MIDI socket
• ULN2803A driver IC
• Optocoupler for MIDI-IN
• Crystal, resistors, and capacitors

NOT included in delivery (order as needed!):

• Relays, relay carrier boards, and flyback diodes
• LEDs and current-limiting resistors
• Buttons and switches
• Cables and wires
• Microcontroller with firmware

µC loaded with "Looper" programm for the Midi-Kit.
This controller is needed if you want to use the Midi-Kit as Looper.
All outputs can be turned on and off independently.
Firmwareversion 2.x Please see the -> MIDI-Switcher project page for more information.

Files:

• Documentation
• Board Size

• Standard Recovery Rectifier
• Voltage max: 1000V
• Current Rating: 1A
• Forward Current: 1A
• Forward Current Avg Rectified, IF(AV): 1A
• Forward Surge Current Max, Ifsm: 1A
• Forward Voltage: 1 V
• Forward Voltage Max, VF:1.3V
• Pack of 10 pcs

Zener Diode BZX85/C12

• 1.3 W
• 12 V
• DO41

• Type: Film capacitor
• Dielectric: polyethylene terephthalate foil
• Capacitance: 0,1 µF
• Voltage Rating: 250 VDC
• Tolerance: -20 % / +20 %
• IEC climate category: 55/100/56
• Operating Temperature Range: - 55°C / + 100 °C
• Dimensions: 5 mm x 10,5 mm x 10,3 mm
• Termination Style: radial
• Grid: 7,5

• MPW axial leaded metallized polypropylene film capacitors
• Self Healing
• Low ESR
• Tolerance: +10% @ 1 kHz, 25°C
• Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
• Size: Ø 8,5 x 14,5 mm
• Dielectric: Polypropylene
• Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)

• Type: Film capacitor
•   self-healing
• Dielectric: polyethylene terephthalate
• Capacitance: 0,47 µF
• Voltage Rating: 400 V
• Tolerance: - 10 % / +10 %
• IEC climate category: 55/125/56
• Operating Temperature Range: - 55°C / + 125 °C
• Dimensions: 7,3 mm x 9,3 mm x 16,5 mm
• Termination Style: radial
• Grid: 15