TT-Chassis 053 - BananaPro

The signal lamps for front panel installation are designed for screw mounting with a recommended installation hole of Ø6mm. The sockets can be supplied with an external or internal reflector. The plug insert is removable. Supplied with washer and hexagonal nut.

The signal lamps for front panel installation are designed for screw mounting with a recommended installation hole of Ø6mm. The sockets can be supplied with an external or internal reflector. The plug insert is removable. Supplied with washer and hexagonal nut.

Power Supply chassis Socket,  with break contact and solder eyes, for front side mounting

• Diameter opening: 6,3 mm
• Diameter center pin: 1,9 mm
• Rated current: 0,5 A @ 12 V DC
• Isulation resistance: > 100 M Ohm

Size for all ECC83 etc. tubes and all other tubes of the same size

Outside diameter: 39.8 mm
Inner diameter: 25.9 mm
Height: 36.3 mm

Size for all ECC83 etc. tubes and all other tubes of the same size

• Outside diameter: 40 mm
• Inner diameter: 26 mm
• Height: 36.5 mm

Kit Banana Booster PRO

The Pro version of the Banana Booster is build on PCB, has an improved powersupply and an extra boost named "Kick".
This kit comes with all items need to build the BananaBooster Pro incl. resistors, capacitors, tube, PCB, PowerSupply (no need to order an plug-in powersupply !), jacks, potentiometers, switches.
Please check the >>project-page for more details, schematic and layout

NOT INCLUDED: chassis and knob

This kit also does NOT include technical support or assistance or remote debugging !

• Version: High quality Micalex socket
• Chassis mount
• Termination Style: solder lugs
• for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.

Cliff 1160 mono jack

• Jack socket, mono
• switched
• for chassis mounting, 4 solder terminals
• for 6.3 mm jack plug
• Used by Marshall and many others

• Datasheet

Cliff 1160 mono jack, vintage-style

• Jack socket, mono
• switched
• for chassis mounting, 4 solder terminals
• for 6.3 mm jack plug
• Used by Marshall and many others

• Datasheet

• Type: Chickenhead, Mini
• Material: Phenolic
• Shaft Size: 6 mm Knurled Shaft
• Size: 22.75 x 18.7 mm

The signal lamps for front panel installation are designed for screw mounting with a recommended installation hole of Ø6mm. The sockets can be supplied with an external or internal reflector. The plug insert is removable. Supplied with washer and hexagonal nut.

The signal lamps for front panel installation are designed for screw mounting with a recommended installation hole of Ø8mm. The sockets can be supplied with an external or internal reflector. The plug insert is removable. Supplied with washer and hexagonal nut.

• UIO (kV~): 2.5     
• RIO (O): 1010     
• CIO (pF): 0.5     
• Clim. Category: 40/ 70/ 04
• Crossreference: Vactrol VTL5C1, Moririca MCD 735

Files:

• Datasheet

• Power Rating: 0,125 W
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6,3 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M7 (6,8 mm)
• Termination: Solder lugs
• Dimension: 16 mm

• Bracket for mounting noval sockets horizontal e.g. in 19" Racks
• Material: 1,5 mm Aluminium
• Size: 90 x 38 mm
• Designed for Belton sockets

• Power Rating: 0,125 W
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6,3 mm, Solid Shaft
• Shaft length: 14,5 mm
• Drill Ø: M7 (6,8 mm)
• Termination: PCB
• Dimension: 16 mm

• Drills: 2 x 66
• Size: 30 x 124 mm
• Material: 1,5 mm FR4

• Power Rating: 0,125 W
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6,3 mm, Solid Shaft
• Shaft length: 14,5 mm
• Drill Ø: M7 (6,8 mm)
• Termination: PCB
• Dimension: 16 mm