Main page » Tubes » JJ-Electronic » JJ 6V6 Red Labe - QUAD

JJ 6V6 Red Labe - QUAD

Product No.:: jj6v6-quad
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: Quad
RoHs:: conform
Weight:: 0.208 kg per Quad

92,80 €
23,20 € per Piece

incl. tax excl. Shipping costs

Quad:

Bookmark

Ask Question

Description

4 tubes, matched as quad

The 6V6 S is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end. Known to be a very powerful 6V6 due to its robust construction. In general, a very balanced tone. It can be used also in some 6L6 amplifiers.

Files:

Datasheet

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Alpha 1 MOhm linear, 3,8"

Panel Mount Potentiometer 3/8"

Power Rating: 0,25 W
Voltage Rating: 250 V AC
Tolerance: 20%
Drill Ø: 3/8-32 (9,45 mm)
Shaft: 6,35 mm, Solid Shaft

2,15 €

Fender LDR Vibrato

Optocoupler. Vibrato LDR for Fender Amps.

Optical side indicated by the dot

8,45 €

JJ 6L6 Red Label

2 Tubes matched as pair
The JJ 6L6 is very popular because of its warm sound.

57,90 €
28,95 € per Piece

Socket Octal Ceramic Fender Style, Chassis

Type: Octal Socket Fender Style
Version: Ceramic Chassis mount
w/mounting bracket
Termination Style: solder lugs
for Tube Type: EL34, E34L, 6L6, 6V6, 6550,
KT66/77/88 etc.

1,50 €

Potentiometer for Marshall JCM800, 1 MOhm log

Body: 24 mm
Shaft: 6,35 mm, Split shaft
PCB
for JCM 800, 2205, 2210, etc.
incl. one nut and one washer

1,50 €

Mojotone BV-25M British Vintage 12" / 25 W / 16 Ohm

Mojotone speakers are produced using soft parts from Europe. Our team spent many years testing various speakers and used collective
knowledge to create the well known BV series speakers that are loved and trusted by guitarists. Those seeking vintage British voiced speakers need to look no further, our BV25 is the answer. These speakers sound like early 70's greenback.

125,00 €

TTC Headshell 18Watt Gold - STANDARD - BLACK

TTC Rebuild of the Marshall 18 Watt Headshell

Specifications

Standard size (W x H x D): ca. 510 x 220 x 210 mm
Chassis Cut Out: ca. 410 x 55 mm
Tolex: Marshall black
Hardware: Marshall Gold
Keder / Piping: Gold
Weight: ca. 4,5 kg
Wood: 12 mm Birch
Dovetail joints
Made in Germany

349,00 €

Fuse 0.315 A slow blow, Pack of 10

Rated Voltage: 250 VAC
Contact caps: nickel-plated brass
Size: Ø 5 mm x 20 mm
Pack of 10

1,55 €

Fuse 1.0 A slow blow, Pack of 10

Rated Voltage: 250 VAC
Contact caps: nickel-plated brass
Size: Ø 5 mm x 20 mm
Pack of 10

1,55 €

TT Powertransformer 18 Watt - EXTENDED

Primary: 0-120V / 0-110V-120V @ 50Hz
Sec. 1: 600 V C.T. @ 100 mA
Sec. 2: 6,3 V C.T. @ 3,2 A
Sec. 3: 6,3 V @ 2A
Sec. 4: 8V @ 2A
Made in Europe.
Marshall 18 Watt Style

75,90 €

TT Outputtransformer for Marshall 18 Watt / 4-8-16 Ohm

Primary: 8 kOhm
Secondary: 4, 8 and 16 Ohm
Power: 18 Watt
Made in Europe

47,80 €

JJ ECC832 / 12DW7

COMBINATED DOUBLE TRIODE
ECC832 is 12DW7 pre-amplifying double triode. It combines 12AX7 and 12AU7, where the 12AX7 is used as 1st stage and the 12AU7 as 2nd stage.

19,90 €

F+T 50 + 50 µF / 500 V Multisection

Type: Multisection Capacitor
Capacitance: 50 + 50 µF
Voltage Rating: 500 V
Tolerance: - 10% / +30 %
Operating Temperature Range: - 40°C / + 85 °C
Dimensions: Ø 35 mm x 50 mm
Termination Style: radial, solder lugs

8,95 €

Accutronics Reverb Tank 8FB3C1B

Springs: 3
Delay Type: long
Size: short
Input Impedance: 1925 Ohms
Output Impedance: 2575 Ohms
Input Insulated
Output Grounded
Horizontal, Open Side Down Mounting Plane
Accutronics by Accu-Bell, Made in Korea

25,00 €

Chassis AL 1444-22

Spot welded heavy duty construction chassis.
Natural finish as shown above - protected through manufacturing and shipping with a plastic skin cover to ensure a high quality finish.
Optional bottom plates are punched with 4 holes (Chassis requires drilling to install optional bottom plates).
Hardware not provided, please order separately
Size: 305 x 203 x 51 mm

25,70 €