Main page » Tubes » JJ-Electronic » JJ ECC832 / 12DW7

JJ ECC832 / 12DW7

COMBINATED DOUBLE TRIODE
ECC832 is 12DW7 pre-amplifying double triode. It combines 12AX7 and 12AU7, where the 12AX7 is used as 1st stage and the 12AU7 as 2nd stage.

Files:

Datasheet

Manufacturer

Herstellerinformationen | Manufacturer Information
JJ Electronic
A. Hlinku 3
022 01 ČADCA
Slowakische Republik
www.jj-electronic.com

Customer reviews (1)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Mallory 150's 0,001 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

Epoxy end fill meets UL94V-0
Non inductively wound
Flame retardant outer wrap meets UL510
Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

1,20 €

TT-Kit AC18

An AC30 / EF86 - One Channel all tube amp

Set of componentes for building the TT Spit F. Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.
Soundclip of the AC18, made by one of our customers: https://youtu.be/eZ-6LP3p5ns

INCLUDED:

Outputtransformer Hammond 1750PA
Powertransformer Tube-Town 18W, 0-120-230-240V @ 50/60 Hz (since batch 26. Feb. 2020)
Resistors
Capacitors
Jacks
Light
Wires
Board
Switches
Tubes
Fuses & Fuesholder

NOT INCLUDED:

Chassis ( see "Accessories" tab for matching chassis )
Knobs
Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

339,00 €

Celestion G12-65 Heritage 12" / 65 W / 8 Ohm - MADE IN UK

Originally created in the late 70s using more modern materials and techniques for a higher power handling, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.With its fast attack and tightly controlled low- end, the G12-65 had become a firm favourite with hard rock players by the early 80s. The precisely tuned mid-range and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.

General Specifications

Nominal diameter: 12", 305mm
Power rating: 65Wrms
Nominal impedance :Available 8Ω or 15Ω
Sensitivity: 97dB
Chassis type: Pressed steel
Voice coil diameter: 1.75", 44.5mm
Voice coil material: Round copper
Magnet type: Ceramic
Magnet weight: 35oz, 0.99kg
Frequency range:80-5000Hz
Resonance frequency, Fs: 85Hz
DC resistance, Re: Available 6.9Ω or 11.8Ω

Mounting Information

Cut-out diameter: 11.1", 283mm
Diameter: 12.2", 309mm
Magnet structure diameter: 5.7", 145mm
Mounting slot dimensions: 0.31", 7.9mm Ø
Mounting slot PCD: 11.7", 297mm
Number of mounting slots: 4
Overall depth: 5.0", 128mm
Unit weight: 7.7lb, 3.5kg

169,00 €

Tolex Marshall-Style Levant Green / Emerald Bronco

Width ca. 120 cm
Price per linear meter.
Also known as Mesa Emerald Bronco.

Actual shades may vary.
We ship the tolex as one piece if you order more than 1 meter.

Material:
80% PVC Film
20% Poly-Cotton Fibre

REACH compliant

Please note !
when you order more than 1 m and select Deutsche Post / DHL Parcel (Not DHL Express) we need to cut the width of the tolex to ca. 115 cm. Otherwise it is not possible to ship the tolex with DHL because the parcel length would exceed the maximum parcel length.

25,90 €
21,58 € per m²

Tolex Tube-Town Ivory

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

80% PVC film
20% polyester-cotton fabric
REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.

24,90 €
18,44 € per m²