Wiring Harness, mono, for Loudspeakers / Combo, Double
Wiring Harness, mono, for Loudspeakers / Combo, Double

Wiring Harness, mono, for Loudspeakers / Combo, Double

Product No.:
tt-ws04
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.073 kg per piece
17,80 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

F+T 47 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 47 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 21 mm x 37 mm
  • Termination Style: axial
5,60 €
F+T 22 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 22 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 39 mm
  • Termination Style: axial
3,15 €
JJ 12AU7 / ECC82
ECC82 / 12AU7 medium gain pre-amplifying double triode.
Provides a very smooth sound with well-defined tones suitable for audio and guitar amplifiers.

Files:
14,65 €
JJ EL84 #05 - Fender Blues Junior

JJ EL84 #05 - Soft Plus

  • Not so hot than the #06 selection but still nice punch
  • Recommended for Fender Blues Junior and Pro Junior and similar amps.
  • Price for one tube.
FAQ: If I order two or more of these tubes, are they all "the same"?
Yes, the tubes are all "matched" and selected for the in the description mentioned amplifier.
FAQ: Can I replace the tubes myself or are adjustments needed?
Adjustments are not possible on the listed amplifier (unless a bias potentiometer has been added afterwards). The replacement can therefore be done without adjustments.
18,00 €
JJ 5751 V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

This tube is recommend to tame the gain of an amp and make it sound "sweeter". The 5751 has only a gain of 70 instead of 100 like the typical 12AX7/ECC83 tube type and can be used as a drop in replacement for 12AX7 / ECC83 tubes.

Files:

23,50 €
F+T 50 + 50 µF / 500 V Multisection
  • Type: Multisection Capacitor
  • Capacitance: 50 + 50 µF
  • Voltage Rating: 500 V
  • Tolerance: - 10% / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 35 mm x 50 mm
  • Termination Style: radial, solder lugs
9,80 €
Wiring Harness, mono, speaker crimps
  • Wiring Harness, mono, speaker crimps
  • Wire: 2 x 1,5 mm² red - black
  • Speaker Crimps on both sides
  • Length: ca. 55 cm
5,90 €
Wiring Harness, mono, for Loudspeakers / 2
  • Wire Set for internal speaker connection
  • Number of speakers: 2
  • Type: Mono, parallel and serial
  • Wire: 2 x 1,5 mm² red - black
  • Jack socket / speaker crimps
  • Length each ca. 55 cm
16,80 €
F+T 33 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 33 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 39 mm
  • Termination Style: axial
3,95 €