Tube-Town GmbH

Upgrade for the Tube-Town Tube-Reverb kit prior  November 2019, which was delivered with a universal board.
Check out the ->Project Page for schematic and documentation

Including:

• PCB
• Resistors

PCB for TT Jim

• Much easier, faster and saver than with a tag board
• optional connection for FX-Loop

HoneyB - a Bassmaster Clone with some nice improvements
Set of componentes for building the TT HoneyB.
Please visit the >>Project page for more infos about the amp.

INCLUDED:

• Transformers (Power and Output)
• Resistors
• Capacitors
• Jacks
• Light
• Wires
• Board
• Switche
• PSU
• Tubes
• Fuses & Fuesholder

NOT INCLUDED:

• Knobs
• Power Cord
• Chassis
• Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it than don't build it.

18 Watt Cool Mod for TT 18W and TT 18W TMB kit.
This is a mod for the PI and the power tube circuit with the effect that the overdrive becomes more "linear", less snotty as with the original circuit. It makes the sound a bit cooler and more modern.

Item contains

• Resistors
• Short doc about the changes

Outputtransformer for Tube-Town Low Projects with EL84 Single-Ended powerstage

• Pri: 5k Ohm
• Sec: 4-8-16 Ohm
• Power: 5 Watt
• Re (a-a) 150 Ohm +/- 5%
• Inductance Pri: 5,15 H @240V/50 Hz, open circuit
• Easy connection
• Large sheet metal package
• Tight bass, balanced mid - treble ratio

Files

• Datasheet

Outputtransformer for Tube-Town Low Projects with ECC99 as a powertube

• Pri: 12k8 Ohm
• Sec: 4-8-16 Ohm
• Power: 8 Watt
• Re (a-a) 250 Ohm +/- 5%
• Pri. Inductance: 165 H @240V/50 Hz, open circuit
• Easy connection
• Large sheet metal package
• Tight bass, balanced mid - treble ratio

Files

• Datasheet

Mica Capacitors

• Voltage Rating:    500 V
• Tolerance: 5%
• Operating Temperature Range: - 50°C / + 150°C
• Termination Style: radial

Power supply kit for the LoV Projects Vanilla Overdrive and Banana Booster.
The kit can be adapted for other applications by changing the voltage regulator 7812 with an other regulator.

Files

• PCB dimensions

The brother of the G-Force One but for bass guitar. Based upon a transistor-circuit and can also be used as a full preamp.

The booster is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables
• LED

Please check the tab "recommended accesoires" for matching components

TT OPP Kit for building an OP preamp, which can be used as buffer, driver, whatever...

The OPP is build on a PCB-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables

Please check the tab "recommended accesoires" for matching components

• Type: Hex Nut
• Material: Polyamide
• Color: white
• DIN: 934
• ISO: 4032
• Price: per pcs.

• Rated Voltage: 250 VAC
• Contact caps: nickel-plated brass
• Size: Ø 6,3 mm x 32 mm

Variable voltage control for voltages up to 600 V

Possible applications:
- G2 Control
- Power adjustment

Please see the >>TT VoCoM Projekt-Seite zu finden.

Der Bausatz beinhaltet alle Teile die zum Bau benötigt werden wie Widerstände, Dioden, Leistungstransistor, Kühlkörper, Potentiometer, Schraube, Mutter, Leitung, Beschriftungsschild.

ACHTUNG HOCHSPANNUNG:
Dieser Bausatz ist nichts für Anfänger. Wer nicht weis, was er damit tut, sollte diesen Bausatz auch nicht kaufen !

">>TT VoCoM project page for more infos

Kit includes:
all parts to build this VVC. Resistors, Heatsink, Wires, Potentiometer, PCB, Label, Screws, Nuts.

WARNING: HIGH VOLTAGE !!
This kit is not for beginners. If you do not know what you are doing than you should NOT buy this kit!

Passive cab / speaker simulation with DI function for recording

Input:

• 6,3 mm Jack with parallel out

Outputs:

• 6,3 mm Jack Line-Out
• XLR-Out with Groundlift
• with outputtransformer
• 6,3 mm stereo jack for headphone
• Volume-Potentiometer
• 5 different voicings, with bypass
• passiv, no powersupply needed

The kit includes all necessary components to build the sim like PCB, capacitors, jacks, knobs, screws and wires

Not included: chassis

Layout and more pictures on the >>project-page

Kit SugarBox 60 - a tube preamp for bass-guitar.

This kit includes all parts needed to build the Vanilla Overdrive incl. resistors, capacitors, tubes, wires, switch, pcb etc.

NOT INCLUDED:

• external wall wart
• chassis (incl. sockets)
• faceplate
• knobs

Please see the "recommended products" list.
This kit also does NOT include technical support or assistance or remote debugging!
Please see the ->project page for more details about the SugarBox 60.