Tube-Town GmbH

Power supply kit for the LoV Projects Vanilla Overdrive and Banana Booster.
The kit can be adapted for other applications by changing the voltage regulator 7812 with an other regulator.

Files

• PCB dimensions

The brother of the G-Force One but for bass guitar. Based upon a transistor-circuit and can also be used as a full preamp.

The booster is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables
• LED

Please check the tab "recommended accesoires" for matching components

TT OPP Kit for building an OP preamp, which can be used as buffer, driver, whatever...

The OPP is build on a PCB-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables

Please check the tab "recommended accesoires" for matching components

• Type: Hex Nut
• Material: Polyamide
• Color: white
• DIN: 934
• ISO: 4032
• Price: per pcs.

• Rated Voltage: 250 VAC
• Contact caps: nickel-plated brass
• Size: Ø 6,3 mm x 32 mm

Variable voltage control for voltages up to 600 V

Possible applications:
- G2 Control
- Power adjustment

Please see the >>TT VoCoM Projekt-Seite zu finden.

Der Bausatz beinhaltet alle Teile die zum Bau benötigt werden wie Widerstände, Dioden, Leistungstransistor, Kühlkörper, Potentiometer, Schraube, Mutter, Leitung, Beschriftungsschild.

ACHTUNG HOCHSPANNUNG:
Dieser Bausatz ist nichts für Anfänger. Wer nicht weis, was er damit tut, sollte diesen Bausatz auch nicht kaufen !

">>TT VoCoM project page for more infos

Kit includes:
all parts to build this VVC. Resistors, Heatsink, Wires, Potentiometer, PCB, Label, Screws, Nuts.

WARNING: HIGH VOLTAGE !!
This kit is not for beginners. If you do not know what you are doing than you should NOT buy this kit!

Passive cab / speaker simulation with DI function for recording

Input:

• 6,3 mm Jack with parallel out

Outputs:

• 6,3 mm Jack Line-Out
• XLR-Out with Groundlift
• with outputtransformer
• 6,3 mm stereo jack for headphone
• Volume-Potentiometer
• 5 different voicings, with bypass
• passiv, no powersupply needed

The kit includes all necessary components to build the sim like PCB, capacitors, jacks, knobs, screws and wires

Not included: chassis

Layout and more pictures on the >>project-page

Kit SugarBox 60 - a tube preamp for bass-guitar.

This kit includes all parts needed to build the Vanilla Overdrive incl. resistors, capacitors, tubes, wires, switch, pcb etc.

NOT INCLUDED:

• external wall wart
• chassis (incl. sockets)
• faceplate
• knobs

Please see the "recommended products" list.
This kit also does NOT include technical support or assistance or remote debugging!
Please see the ->project page for more details about the SugarBox 60.

T-Nut M6
Pack with 8 pcs.

• Size: 133,35 x 30,5 mm
• Material: FR4 1,6 mm
• Solder stop: blue
• Print: white

Basic Kit Tomato Blaster

This kit includes all parts needed to build the LoV Tomato Blaster incl. resistors, capacitors, tubes, wires, switch, pcb etc.

NOT INCLUDED:

• chassis
• knobs
• wall mount power supply

Please see the "recommended products" list.
This kit also does NOT include technical support or assistance or remote debugging!
Please visit the ->project page for more details about the Tomato-Blaster

Ultra linear booster for guitar based on a classic transistor circuit. Can also be used as preamp.

The booster is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables

Please check the tab "recommended accesoires" for matching components

A classic linear booster for guitar.

The booster is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables

Please check the tab "recommended accesoires" for matching components

A classic treble booster for guitar in the style of the Rangemaster.

The booster is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables

Please check the tab "recommended accesoires" for matching components

A classic treble booster for guitar in the style of the EH Screaming Bird.

The booster is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.
The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

• knob
• chassis
• footswitch
• faceplate or lables

Please check the tab "recommended accesoires" for matching components

Basic Kit Vanilla Overdrive 60 - Successor of the Vanilla Overdrive MKIII.
Please see the ->project page for more details about the Vanilla Overdrive 60.

This kit includes all parts needed to build the Vanilla Overdrive incl. resistors, capacitors, tubes, wires, switch, pcb etc.The VPump60 is also part of the kit.

NOT INCLUDED:

• external wall wart
• chassis (incl. sockets)
• faceplate
• knobs

Please see the "recommended products" list.
This kit also does NOT include technical support or assistance or remote debugging!

Basic Kit Pepper Shredder 60
Please see the ->project page for more details about this project.

This kit includes all parts needed to build the Pepper Shredder 60 incl. resistors, capacitors, tubes, wires, switch, pcb etc.

NOT INCLUDED:

• external wall wart
• chassis (incl. sockets)
• faceplate
• knobs

Please see the "recommended products" list.
This kit also does NOT include technical support or assistance or remote debugging!
 

• Rated Voltage: 250 VAC
• Contact caps: nickel-plated brass
• Size: Ø 6,3 mm x 32 mm