Tube-Town GmbH

• solid tinned copper wire
• Wire diameter: 0.8 mm
• Cross-section: 0.5 mm²
• Outer diameter: 1.4 mm
• PVC insulation
• Rated voltage: max.: 900 V
• Temperature range: –15 °C to +70 °C
• Length: 100 m

• Tube-Town Prototyping Board
• Size: 105 x 50 mm
• Material: 1,5 mm FR4 red

TT Cable Speaker Cable PREMIUM

• Length: 0,5 m
• Color: black
• 1st Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• 2nd Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

TT Cable Speaker Cable PREMIUM

• Length: 1 m
• Color: black
• 1st Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• 2nd Jack: Mono, 6,3 mm Jack - Neutrik NP2X-BAG
• Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

Replacement footswitch for Marhsall amps:

• generic version of Marshall M-PEDL-91004
• compatible with JCM 900 4100 and others
• Two Buttons, latching
• Wire ca. 6 m

Files:

• Datasheet

Fender® style footswitch

• 1-button
• Vintage style
• RCA-Plug
• ca. 5 m shileded wire

For older Twin Reverb®, Deluxe Reverb, Pro Reverb, Super Reverb, Bandmaster Reverb, and all vintage amps with 2-way footswitchable ON/OFF with RCA connector.

• 2-button
• Vintage style
• RCA-Plug
• ca. 3,5 m shileded wire
• Replacment for Fender 0994051000

Fender® style Footswitch
For older Twin Reverb®, Deluxe Reverb, Pro Reverb, Super Reverb, Bandmaster Reverb, and all vintage amps with 2-way footswitchable ON/OFF with RCA connector.

• Color: black
• 2-button
• Vintage style, black
• RCA-Plug
• ca. 5 m shileded wire
• Replacement for Fender 0994051000

Footswitch BoxMarshall Style

• One Button, latching
• Wire ca. 6 m

Footswitch Box Marshall Style

• One Button, latching, ON / OFF
• Wire ca. 6 m
• With LED

Replacement footswitch for Marhsall amps:

• generic version of Marshall PED802
• compatible with Valvestate VS100R and others
• two button, latching
• wire ca. 6 m
• with LED, must receive power externally from the amp

Files:

• Datasheet

µC loaded with "Looper" programm for the Midi-Kit.
This controller is needed if you want to use the Midi-Kit as Looper.
All outputs can be turned on and off independently.
Firmwareversion 2.x Please see the -> MIDI-Switcher project page for more information.

Files:

• Documentation
• Board Size

• Colors: red, blue, yellow, black
• Packing: 4 x 2 m
• Insulation: Silicon
• Operation Voltage Uo/U: 300 / 300 V AC
• Test Voltage: 2000 V
• Operating temperatures: –50 bis +180 °C
• Cross-Section: 0,5 mm²
• Outer Diameter: 2,1 mm
• Stranded wire structure: 16 x 0,20 mm, tinned copper

µC loaded with standard MIDI-Switcher programm for the MIDI-Switcher-Kit.

Firmare Version 2.X
MIDI-Switch can handle Controll Change

Texture and color just like the Marshall Cane and Orange Weaves, only slightly thinner and thus easier to handle.
Furthermore, the mesh size is a little wider, and therefore the damping of the highs is much less compared with the original fabrics.

• Size (W x L): ca. 70 x 100 cm (only available in this size)
• Material: 100% treated paper
• Price per pcs.
• Actual shades may vary.

Further information and notes on Grillcloth

• FAQ Grillcloth

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

• 80% PVC film
• 20% polyester-cotton fabric
• REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.