Main page » Components » Parts for Amps » Turrets, Eyeletts + Boards » TT EZ-Boards » Tube-Town Connection Board for LED Footswitch

Preview: Tube-Town Connection Board for LED Footswitch

Tube-Town Connection Board for LED Footswitch

Mobile Preview: Tube-Town Connection Board for LED Footswitch

Description

Connection Board for LED Footswitch

for easy monting of the LED resistor
LED already connected with the switch

Manufacturer

Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

Footswitch 3PDT, LED Ring, BLUE

Type: Footswitch
Version: 3PDT
Rating: 2A / 250VAC, 4A / 125VAC
Termination Style: solder-lugs
LED ring
LED colour: blue
LED: U=2,2 - 2,4V, I = ca. 7-10mA
Mounting hole: 17,2 mm
Lifetime: > 10000 cycles

4,90 €

Needed for:

Footswitch 3PDT, LED Ring, BLUE

Type: Footswitch
Version: 3PDT
Rating: 2A / 250VAC, 4A / 125VAC
Termination Style: solder-lugs
LED ring
LED colour: blue
LED: U=2,2 - 2,4V, I = ca. 7-10mA
Mounting hole: 17,2 mm
Lifetime: > 10000 cycles

4,90 €

Kit TT OPP - Preamp / Buffer

TT OPP Kit for building an OP preamp, which can be used as buffer, driver, whatever...

The OPP is build on a PCB-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

knob
chassis
footswitch
faceplate or lables

Please check the tab "recommended accesoires" for matching components

12,20 €

Kit Toneactive - Active Tone Control

An active tone control is always usefull. It can be placed between guitar and amp to expand the sound spectrum considerably
The Toneactive is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already:

knob
chassis
footswitch
faceplate or lables

Please check the tab "recommended accesoires" for matching components

14,80 €

Footswitch 3PDT, LED Ring, Green, without cap

Type: Footswitch
Version: 3PDT
Rating: 2A / 250VAC, 4A / 125VAC
Termination Style: solder-lugs
LED ring
LED colour: red
LED: U=2,2 - 2,4V, I = ca. 7-10mA
Mounting hole: 17,2 mm
Lifetime: > 10000 cycles
without cap

3,90 €

Footswitch 3PDT, LED Ring, RED, without cap

Type: Footswitch
Version: 3PDT
Rating: 2A / 250VAC, 4A / 125VAC
Termination Style: solder-lugs
LED ring
LED colour: red
LED: U=2,2 - 2,4V, I = ca. 7-10mA
Mounting hole: 17,2 mm
Lifetime: > 10000 cycles
without cap

3,90 €

Kit Rangemaster-Style Booster

A classic treble booster for guitar in the style of the Rangemaster.

The booster is build on our universal STOMP-board, it is simple and easy for beginners, too.
Please visit the >>STOMP-Project Pages for more information about this kit.

The kit includes all basic parts needed to build the booster like resistors, capacitors, potentiometers, wire, PCB board.

The partes listed below are NOT INCLUDED and you need to order them separately if you do not have them already: