Tolex VOX®-Style black basket

• Mesh, black
• Size: 660 x 150 mm
• Meshsize: 12 x 6 x 1 x 0,5 mm
• Net Weight: ca. 150 g

• Power: 150 W RMS
• Damping: 0 - 100%
• Impedance: 4, 8, 16 Ohm
• Range-Select
• Lin/Log Switch
• Line-Out
• Size: ca. (H x W x D) 133 x 210 x 148 mm

Please note: The PoS is a resistive attenuator, which is used for power reduction and is connected between amplifier output and loudspeaker cabinet. It is NOT a reactive load. For this purpose the Tone-Hound must be used.

The schematic and layout plan for this kit will be sent by email together with the invoice, usually on the same day the order is sent.

A customer has made a recording with his Marshall and PoS100 and has put it online. You can see the video on YouTube.

FAQ: Can I use the PoS150 as dummy-load ?
Yes, but you must connect a "load" to the PoS150. This must NOT be a speaker-cab ! Just use a power resistor with 8 Ohm, mount it onto a heatsink and connect it with a jack than you can use the PoS as a Dummy-Load too.

Files:

• Datasheet (EN)

• Outside Diameter: 13,50 mm
• Inside Diameter: 5,30 mm
• Pack with 12 pcs.

• with steel core
• dark brown
• end caps nickel plated, shiny
• high quality
• screws and t-nuts included

• Marshall Style
• Heavy Duty
• Plastic covered with steel inner core
• Black
• Screws and t-nuts included

• Same structure as grillclot Marshall FRET00026
• Color: cream
• Size (L x W): ca. 100 x 80 cm (only available in this size)
• Material: 100% treated paper
• Price per pcs.
• Actual shades may vary.

• FAQ Grillcloth

Universal Mono/Stereo Terminal

for the use with two 16 Ohm speakers the following configurations are possible:

• 8 ohm mono
• 16 ohm left + 168 ohm right stereo
• 16 ohm left only mono
• 16 ohm right only mono
• 32 ohm mono

Size: ca. 110 x 103 mm
Cutout: ca. 87 x 76 mm

Colorcodes:

• black: L-
• red: L +
• green: R -
• white: R +

Files:

• Datasheet

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: 3/8-32 (9,45 mm)
• Termination: Solder lugs
• Dimension: 24 mm

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: 3/8-32 (9,45 mm)
• Termination: Solder lugs
• Dimension: 24 mm

• Type:Toggle Switch
• Version:SPST, ON-OFF
• Rating: 3A / 250V, 6A / 125V
• Insulation resistance: 100MΩ min.
• Dielectric strength: 1000V min.
• Operating Life: 25.000 cycles
• Drill Ø: 12 mm
• Termination Style: solder-lugs