Tolex Tube-Town British Slate

Round dish / ferrule for 6.3 mm jack

• metal
• black powder coated
• incl. 3 screws

Set of metal corners for housing consisting of:

• 8 x Cabinet corner w/ cutaway 2 leg, silver (pe-c1824k)
• High Quality
• Powder Coated black
• Internal radius: 12 mm
• 16 x Screws, flat head, black

Steel bar handle, large

• Steel, black powder-coated
• Size: 273 x 162 mm
• Cutout: 225 x 116 mm

• Rubber foot with steel insert
• Size: d = 38 mm, h = 25 mm
• Pack of 4

The ET90 is our lastest addition to the ET65 lineage.  Taking its core sound from the ET65, the ET90 gives you more all the way around.  We went to larger motor and a beefier voice coil on this model.  The result is more headroom, more power handling and a bigger feel.  If you've been looking for classic British tone with an "open" feel and a lot of power, the ET90 is your new favorite.

Thiele-Small Parameters

• Resonant Frequency (Fs): 100.14 Hz
• DC Resistance (Re): 8.04 Ohm
• Coil Inductance (Le): 0.33 mH
• Mechanical Q (Qms): 6.08
• Electromagnetic Q (Qes): 0.78
• Total Q (Qts): 0.69
• Compliance Equiv. Vol. (Vas): 16.03 cu ft
• Mech. Compliance of Susp. (Cms): 0.08 mm/N
• BL Product (BL): 13.95 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.95 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.94 db

The Invader 50 is the weeter and creamier version of the hugely popular Green Beret.  It retains all the same great rock and roll character with just a little sweeter top end and breakup.  The beefed up coil means you can now use it with higher wattage amps.  It's time to invade your amp with tone!

Thiele-Small Parameters

• Resonant Frequency (Fs): 82.67 Hz
• DC Resistance (Re): 7.83 Ohm
• Coil Inductance (Le): 0.34 mH
• Mechanical Q (Qms): 10.73
• Electromagnetic Q (Qes):0.81
• Total Q (Qts): 0.76
• Compliance Equiv. Vol. (Vas): 24.13 cu ft
• Mech. Compliance of Susp. (Cms):0.13 mm/N
• BL Product (BL): 12.08 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.20 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.03 db

Originating from the Green Beret and Invader 50 lineage, the Invader 65HV celebrates our tonal heritage with remarkable proficiency. While retaining the authentic rock and roll character that established its predecessors, we’ve expanded on its capabilities with more power handling and a vented 50 oz. magnet giving greater SPL and thermal relief.

These build attributes result in a wide-ranging, potent voicing suitable for whatever style of guitar inspires you. Expect a refined harmonic profile—offering midrange complexity, smooth top end shimmer and a formidable bass presence. This design maintains extraordinary sensitivity to playing dynamics responding with remarkable clarity to every nuance of your technique, whether delivering delicate passages or commanding rhythmic chunk. 

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

• Safety Datasheet

Width ca. 135 cm
Price per linear meter.
Actual shades may vary.
We ship the tolex as one piece if you order more than 1 meter.

Material:
80% PVC Film
20% Poly-Cotton Fibre

REACH compliant

Please note !
when you order more than 1 m and select Deutsche Post / DHL Parcel (Not DHL Express) we need to cut the width of the tolex to ca. 115 cm. Otherwise it is not possible to ship the tolex with DHL because the parcel length would exceed the maximum parcel length.

PVC piping for baffles and cabinet front panels

• Size 5 x 14 mm
• 4 m piece