JJ 12AX7 / ECC83S
JJ 12AX7 / ECC83S

JJ 12AX7 / ECC83S

Product No.:
jj12ax7
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
0.014 kg per piece
17,90 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

Potentiometer Bourns 1M Log HRT

Bourns PDA24 Potentiometer, HRT-Type, high torque, Recommended for amplifier.

  • Mounting: Panel
  • Shaft Type: rund, straight
  • Terminal: Solder Terminal
  • Power Rating:
    • Log: 250 mW (1/4W)
    • Lin: 500 mW (1/2 W)
  • Max. Operation Voltage:    
    • Log: 250 V
    • Lin: 500 V
  • Standard Resistance Tolerance: 15%
  • Operating Temperature: - 10 C bis +70 C
  • Diameter Shaft: 6,35 mm
  • LengthShaft: 19 mm
  • Rotational Torque: High 70 bis 100 g-cm
4,15 €

Tube-Town Reverb Tank RCA cable, 200 cm
  • Reverb Tank RCA cable, 200 cm
  • straight plugs
  • Replaces Fender®  Part # 002-5722-000
1,85 €

JJ ECC803 Selected GOLD

Sonically similar to the "normal" JJ 12AX7, but the overall sound is "fuller" and "stronger" with a more powerful bass. Visually, compared to the normal JJ 12AX7, the long anode plates stand out, as well as a slightly higher current. Suits well in guitar and bass amps, but also in audio and high-end areas.

All JJ gold preamp tubes are selected within a close tolerance and handtested for best sound and quality. Furthermore all pins are gold plated to achieve best electrical contact.
What about the sound? It is still the famous and well known JJ brownsound - warm and smooth.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

Files:

32,90 €

Fender LDR Vibrato
Optocoupler. Vibrato LDR for Fender Amps.
  • Optical side indicated by the dot
8,45 €

Hammond 290UEX for Fender Power Hot Rod Deluxe
  • Used in Hot Rod Deluxe 021-3202-000
  • Fender No: 36958
  • Core: Paper

Files:

126,60 €

JJ 6550 - QUAD

4 tubes, matched as quad

Very credible 6550 so far.
We recommend this 6550 for bass amps which are working with 6550 tubes, especially Ampegs.

Files:

228,00 €
57,00 € per Piece

Sovtek 6L6 WXT+ / STR430 - #16 - Mesa RED

Sovtek 6L6 WXT+ / STR430 - #16 - Mesa RED

  • Corresponds to Mesa Color Code RED
  • Price for one tube.
FAQ: If I order two or more of these tubes, are they all "matched"?
Yes, the tubes are all "matched" and selected for the above amplifiers.

FAQ: Can I change the tubes myself or does anything need to be adjusted?
Adjustment work is not possible on the above amplifiers (unless a bias adjustment has been retrofitted). The exchange can therefore be done without any adjustment or measurement work.
34,00 €

TT EL84 / 6BQ5 #06 - Peavey Classic 30 / 50, VOX AC30

TT EL84 / 6BQ5 #06 - Peavey Classic 30 / 50, VOX AC30

  • Recommended for Peavey Classic 30 / 50, AC30 and similar amps
  • Price for one tube.
FAQ: If I order two or more of these tubes, are they all "the same"?
Yes, the tubes are all "matched" and selected for the in the description mentioned amplifiers.
FAQ: Can I replace the tubes myself or are adjustments needed?
Adjustments are not possible on the listed amplifier (unless a bias potentiometer has been added afterwards). The replacement can therefore be done without adjustments.
15,90 €

Jupiter Condenser "Vintage" 0,1 µF / 600 V

Jupiter Condenser “Vintage” Tone
Based closely on the Yellow Molded Astron capacitor for a more authentic tone to the time period. Construction is Aluminum Foil with Polyester(Mylar) Film Dielectric with tinned copper leads.

  • Type: Polyester/Aluminum Foil
  • Voltage Rating: 600VDC - Tested at 1200VDC
  •   at three stages of production)
  • Tolerance: +/-10% typically much closer
  • Operating temperature: -55C - 85C, derate 50% at 125C
  • Leads: 20awg Tinned Copper
  • Application: Guitar Amplifier, Guitar Tone Control


Made in USA of US materials

7,60 €

Mounting Set for Handle Dogbone
Mounting set for case handles with 4 holes consisting of
  •     4 x T-Nut M4
  •     4 x Countersunk screw M4x25 mm, nickel-plated
1,05 €

WIMA MKP 10 - 0,022µF / 400 V - RM 10 - film capacitor
  • Type: Film capacitor
  • Dielectric: polypropylene film
  • Coating: plastic foil, metalized on both sides
  • Capacitance: 0,022 µF
  • Voltage Rating: 400 VDC / 250 VAC
  • Tolerance: ±10 %
  • IEC climate category: 55/100/56
  • Operating Temperature Range: - 55°C / + 100 °C
  • Dimensions: 4 x 9 x 13 mm
  • Termination Style: radial
  • Grid: 10
0,38 €