The LNDVerb kit is based on a classic Fender reverb circuit, but uses LND 150 Mosfets instead of tubes. These can be operated at voltages as high as 500 V, to get as close as possible to the characteristics of real tubes.

Size (W x L): ca. 90 x 60 cm (only available with this size)
Price per pcs.
Actual shades may vary.

Size: ca. 74 x 100 cm (only available in this size)
Price per pcs.
Actual shades may vary.

• Size: ca. 120 x 90 cm (only available in this size)
• ORIGINAL FENDER
• Material: 94 % Polypropylen, 6 % Acrylic
• Price per pcs.
• Actual shades may vary.

• Springs: 3
• Delay Type: long
• Size: short
• Replacement: Fender Super Champ
• Accutronics by Accu-Bell, Made in Korea

Bass reflex tuning port, Ø 100 mm, black plastic.
Length: 4" / 111.5 mm

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Width ca. 135 cm
Price per linear meter.
Actual shades may vary.
We ship the tolex as one piece if you order more than 1 meter.

Reverb Tank 9AB2C1B

• Springs: 3
• Delay type: Medium
• Size: Long
• Input: 10 Ω
• Output: 2.575 Ω
• Connector: Input isolated/output grounded
• Interlock: No interlock
• Mounting: Horizontal / open side down

• Rubber foot with steel insert
• Size: d = 38 mm, h = 25 mm
• Pack of 4