Main page » Components » Switch » Relays » Finder Relays DPDT , 125V 2A, 6V

Finder Relays DPDT , 125V 2A, 6V

Mobile Preview: Finder Relays DPDT , 125V 2A, 6V

Description

Relays, type Finder Dual-In-Line-Relais 2,0 A for low breaking capacity.

Compact dimensions:20.3 x 10.1 x 11.4 mm, grid according to wiring diagram
Function: 2 x changeover contacts
Constant/inrush current: 3.0 A/2.0 A
Rated/switching voltage: 125 VAC/250 VAC
Breaking capacity AC 1/AC 15 (230 V): 125 VA/25 VA
Switching current DC 1: 2.0 A/30 V, 0.3 A/110 V
Minimum switching load: 10 mW (0.1 V/1.0 mA)
Contact material: AgNi+Au (5.0 µm)
Useful mechanical life DC: 10 x 10 exp6 switching cycles
Electrical life AC 1: 100 x 10 exp3 switching cycles
Insulation coordination EN 61810-5: 1.2 kV/2
Electric strength coil/contact (1.2/50 µs): 1.5 kV
Response/release time: 6.0 ms/2.0 ms
Ambient temperature: –40 to +85 °C
Relay protection class: RT III
Certifications: CSA, UL, GOST

Files:

Datasheet

Documents

Finder Relays Series 30 (176.04 KB)

Manufacturer

Herstellerinformationen | Manufacturer Information
Finder GmbH
Hans-Böckler-Strasse 44
65468 Trebur-Astheim
Germany
http://www.finder.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Needed for:

Tube-Town EZ-Board Single Relais PCB

Single Relais PCB for channel switching etc..
Size: 41 x 35 mm
For the use with Finder Relais type 30.22.9xx (or relais with similar pin layout).

1,10 €

Customers who bought this product bought also the following products:

Kit Dumbleator

This is a kit of the famous Dumbleator, can be used as standalone device or for installation in an existing amplifier.

When build as a stand-alone device, the kit can be powered with the TT-VPump, in an amplifier the kit must be supplied via the existing power supply of the amp.

The Dumbleator offers numerous configuration options which are shown in the appended schematics.

Input Levels:
InA: 10-15 Vpp
InB: guitar level - 5 Vpp

The kit includes all the parts needed to build the "standard version" incl. a 12AX7, potentiometers and leads.
It does not include components that are required for the building the extended versions, as well as a power supply or casing.

The Dumbleator utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

Schematics

34,60 €

TT VPump - Voltage Converter

The TT VPUMP kit is a very effective working voltage converter which generates an output voltage of 90 V DC to 220 V DC from a 12V DC input voltage.
The circuit is in use for many years now and it is proven. In this kit the circuit has been adapted to a compact size and optimized for use in small preamplifier chassis. So it is an ideal HV power supply for tube stompboxes and preamps without the need of additional transformers and HV filter capacitors.

The VPump can be operated with a standard 12V DC switching power supply.
The switching power supply is not included in the kit.

Specification:
Input Voltage: 12 V DC @ min 4 VA
Output Voltage: 90 - 220 V DC, adjustable
Output Current: 15 mA @ 220 V DC max

Files:

15,80 €

Finder Relays DPDT , 125V 2A, 12V

Relays, type Finder Dual-In-Line-Relais 2,0 A
for low breaking capacity

Compact dimensions: 20.3 x 10.1 x 11.4 mm, grid according to wiring diagram
Function: 2 x changeover contacts
Constant/inrush current: 3.0 A/2.0 A
Rated/switching voltage: 125 VAC/250 VAC
Breaking capacity AC 1/AC 15 (230 V): 125 VA/25 VA
Switching current DC 1: 2.0 A/30 V, 0.3 A/110 V
Minimum switching load: 10 mW (0.1 V/1.0 mA)
Contact material: AgNi+Au (5.0 µm)
Useful mechanical life DC: 10 x 10 exp6 switching cycles
Electrical life AC 1: 100 x 10 exp3 switching cycles
Insulation coordination EN 61810-5: 1.2 kV/2
Electric strength coil/contact (1.2/50 µs): 1.5 kV
Response/release time: 6.0 ms/2.0 ms
Ambient temperature: –40 to +85 °C
Relay protection class: RT III
Certifications: CSA, UL, GOST

Files:

Datasheet

2,70 €

Mallory 150's 0,001 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

Epoxy end fill meets UL94V-0
Non inductively wound
Flame retardant outer wrap meets UL510
Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

1,25 €

Mallory 150's 0,01 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

Epoxy end fill meets UL94V-0
Non inductively wound
Flame retardant outer wrap meets UL510
Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

1,53 €

Mallory 150's 0,0047 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

Epoxy end fill meets UL94V-0
Non inductively wound
Flame retardant outer wrap meets UL510
Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

1,50 €