Main page » Components » Switch » Relays » Tube-Town EZ-Board Single Relais PCB

Tube-Town EZ-Board Single Relais PCB

Description

Single Relais PCB for channel switching etc..
Size: 41 x 35 mm
For the use with Finder Relais type 30.22.9xx (or relais with similar pin layout).

Manufacturer

Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

Screw Terminal for PCB, 2-pole

Screw terminal for print
Pole: 2
Color: gray
Rated current: 13 A
Grid: 5 mm

0,46 €

Finder Relays DPDT , 125V 2A, 6V

Relays, type Finder Dual-In-Line-Relais 2,0 A for low breaking capacity.

Compact dimensions:20.3 x 10.1 x 11.4 mm, grid according to wiring diagram
Function: 2 x changeover contacts
Constant/inrush current: 3.0 A/2.0 A
Rated/switching voltage: 125 VAC/250 VAC
Breaking capacity AC 1/AC 15 (230 V): 125 VA/25 VA
Switching current DC 1: 2.0 A/30 V, 0.3 A/110 V
Minimum switching load: 10 mW (0.1 V/1.0 mA)
Contact material: AgNi+Au (5.0 µm)
Useful mechanical life DC: 10 x 10 exp6 switching cycles
Electrical life AC 1: 100 x 10 exp3 switching cycles
Insulation coordination EN 61810-5: 1.2 kV/2
Electric strength coil/contact (1.2/50 µs): 1.5 kV
Response/release time: 6.0 ms/2.0 ms
Ambient temperature: –40 to +85 °C
Relay protection class: RT III
Certifications: CSA, UL, GOST

Files:

Datasheet

2,60 €

Finder Relays DPDT , 125V 2A, 12V

Relays, type Finder Dual-In-Line-Relais 2,0 A
for low breaking capacity

Compact dimensions: 20.3 x 10.1 x 11.4 mm, grid according to wiring diagram
Function: 2 x changeover contacts
Constant/inrush current: 3.0 A/2.0 A
Rated/switching voltage: 125 VAC/250 VAC
Breaking capacity AC 1/AC 15 (230 V): 125 VA/25 VA
Switching current DC 1: 2.0 A/30 V, 0.3 A/110 V
Minimum switching load: 10 mW (0.1 V/1.0 mA)
Contact material: AgNi+Au (5.0 µm)
Useful mechanical life DC: 10 x 10 exp6 switching cycles
Electrical life AC 1: 100 x 10 exp3 switching cycles
Insulation coordination EN 61810-5: 1.2 kV/2
Electric strength coil/contact (1.2/50 µs): 1.5 kV
Response/release time: 6.0 ms/2.0 ms
Ambient temperature: –40 to +85 °C
Relay protection class: RT III
Certifications: CSA, UL, GOST

Files:

Datasheet

2,70 €

Screw Terminal for PCB, 3-pole

Screw terminal for print

Pole: 3
Color: gray
Rated current: 15 A
Grid: 5 mm

1,05 €

Needed for:

Kit TT-Midi-Switcher

Microcontroller-controlled MIDI switcher for channel switching or loop switching. Operation can be performed either via MIDI or a footswitch (momentary switch).

!!! UPDATE !!! With the May 2019 update, the following adjustments were made to the module:

The large relay board has been removed and is no longer included in the kit, as a wide range of different relays with carrier boards is now available, offering much more flexible applications.
The documentation has been consolidated and is available as a PDF download directly with the kit.
The microcontroller with the firmware is no longer included in the kit and must be ordered separately depending on the desired version.

These changes allowed us to offer the kit in a more universal, flexible, and cost-effective way. More short information and software on the >>TT-Midi-Switcher project page

Included in delivery:

Controller board
Components for 5V onboard power supply
MIDI socket
ULN2803A driver IC
Optocoupler for MIDI-IN
Crystal, resistors, and capacitors

NOT included in delivery (order as needed!):

Relays, relay carrier boards, and flyback diodes
LEDs and current-limiting resistors
Buttons and switches
Cables and wires
Microcontroller with firmware

21,80 €

Customers who bought this product bought also the following products:

JJ 12AX7 MG / ECC83 MG

The newest member in the JJ family of ECC83/12AX7 tubes is the JJ ECC83MG. The MG is a 12AX7 with a bit lower amplification than a standard 12AX7. Our measurements show that the difference is small, but the new tube sounds more linear than the standard JJ 12AX7, and in amps produces a milder, gentler sound. The mechanical construction shows that it is not just another minor variation of the normal JJ 12AX7. The new tube has longer plates.
The JJ ECC83MG is interesting for low and medium gain amplifiers, as well as for audio, where a too hot amp needs to be tamed; as well as an alternative to a 12AY7.

Files: