Faceplate for TT Amp-Kit PX18 - Gold GLOSSY
Faceplate for TT Amp-Kit PX18 - Gold GLOSSY
Faceplate for TT Amp-Kit PX18 - Gold GLOSSY

Faceplate for TT Amp-Kit PX18 - Gold GLOSSY

Product No.:
lab-px18
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.112 kg per piece
34,90 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description

Faceplate for TT Amp-Kit PX18

  • Color: #LG10 gold GLOSSY lacquered
  • Material: 1.5 Acryl Revers
  • Front + Rear Panel

Files:

Manufacturer
Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Needed for:

TT-Kit PX18
TT-Kit PX18
TT PX18 - An All-Tube Mini Plexi 18 Watt Guitar Amp Kit.

Set of componentes for building the TT TT PX18 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:
  • Outputtransformer: Hammond 1750PA or TT-MA18-OT
  • Powertransformer: Tube-Town 18W, 0-120-230-240V @ 50/60 Hz (since 22. Nov. 2019)
  • Resistors
  • Capacitors
  • Jacks
  • Light
  • Wires
  • Board
  • Switches
  • Tubes
  • Fuses & Fuesholder

NOT INCLUDED:
  • Chassis
  • Knobs
  • Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !
369,00 €

Customers who bought this product bought also the following products:

Alpha 25 kOhm linear
Alpha 25 kOhm linear
Panel Mount Potentiometer
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M8 (7,8 mm)
  • Termination: Solder lugs
  • Dimension: 24 mm
1,30 €

Alpha 1 MOhm log / Audio
Alpha 1 MOhm log / Audio
Panel Mount Potentiometer
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M8 (7,8 mm)
  • Termination: Solder lugs
  • Dimension: 24 mm
1,30 €

Metalfilm Resistor 470 Ohm / 1% / 0,5 W - Pack of 5
Metalfilm Resistor 470 Ohm / 1% / 0,5 W - Pack of 5

Metalfilm Resistor
Great for amps and effects, low noise, small size, high power rating

Spezification:

  • Power: 0,5 Watt
  • Voltag: 350 V working / 700 V overload
  • Axial Leads
  • -55° C - 155° C
  • 9,4 * 3,2 mm
  • 1,0 %
  • RoHS
0,85 €
0,17 € per Piece

Classic Bakelit knob black, 20 mm
Classic Bakelit knob black, 20 mm
  • Type: Pointer Knob "Classic Fluted"
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 20 x 11,5 mm
  • Mounting: Set-Screw
1,09 €

Kit LNDVerb
Kit LNDVerb
The LNDVerb kit is based on a classic Fender reverb circuit, but uses LND 150 Mosfets instead of tubes. These can be operated at voltages as high as 500 V, to get as close as possible to the characteristics of real tubes.

The kit can be integrated into an existing amplifier or can be build as standalone unit like the Fender tube reverb.

The unit needs less than 10 mA current, so a VPump for example can be used as power supply in a standalone build. If it gets integrated into an existing amplifier the already present power supply of the amp can be used to supply the needed voltage for the unit without the need to upgrade the power transformer.

A reverb transformer of the type 125A20B or similar and a reverb tank are necessary to operate the LNDVerb. These are both not included in the kit.

The needed RCA phone sockets and potentiometers are included in the kit.

Further informations and examples of the finished unit can be found in the PDF below.

Matching parts are linked below and can be ordered with the unit if needed.

Files:
 
16,20 €

Mallory 150's 0,0047 µF / 630 VDC
Mallory 150's 0,0047 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
Specifications:
  • Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
  • Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
  • Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
  • Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
  • Self Inductance: 1 nH max. per 1 mm lead and body length
  • Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
  • Damp Heat Test: 95% RH @ +45 ºC for 21 days
  • Soldering: 260 ºC ±5 ºC for 10 s ±1 s
  • Long Term Storage Stability: ?C/C = ±3% after 2 years
1,50 €

Knob Classic Pointer - Cream
Knob Classic Pointer - Cream
Pointer Knob "Classic"
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 19 x 14,5 mm
  • Mounting: Hexagon Set-Screw
0,79 €

Metalfilm Resistor 1 Meg Ohm / 1% / 0,5 W - Pack of 5
Metalfilm Resistor 1 Meg Ohm / 1% / 0,5 W - Pack of 5

Metalfilm Resistor
Great for amps and effects, low noise, small size, high power rating

Spezification:

  • Power: 0,5 Watt
  • Voltag: 350 V working / 700 V overload
  • Axial Leads
  • -55° C - 155° C
  • 9,4 * 3,2 mm
  • 1,0 %
  • RoHS
0,85 €
0,17 € per Piece

Elektrolyt 10 µF @ 63 V
Elektrolyt 10 µF @ 63 V
  • Type: Electrolytic capacitor
  • Capacitance: 10 µF
  • Voltage Rating: 63 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 5 mm x 11 mm
  • Termination Style: axial

Images are for reference only. See Product Specifications

0,65 €

Elektrolyt 220 µF @ 63 Volt
Elektrolyt 220 µF @ 63 Volt
  • Type: Electrolytic capacitor
  • Capacitance: 220 µF
  • Voltage Rating: 63 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 15 mm x 20 mm
  • Termination Style: axial

Images are for reference only. See Product Specifications

0,85 €

Metalfilm Resistor 1.5k Ohm / 1% / 0,5 W - Pack of 5
Metalfilm Resistor 1.5k Ohm / 1% / 0,5 W - Pack of 5

Metalfilm Resistor
Great for amps and effects, low noise, small size, high power rating

Spezification:

  • Power: 0,5 Watt
  • Voltag: 350 V working / 700 V overload
  • Axial Leads
  • -55° C - 155° C
  • 9,4 * 3,2 mm
  • 1,0 %
  • RoHS
0,85 €
0,17 € per Piece

Metalfilm Resistor 100k Ohm / 1% / 0,5 W - Pack of 5
Metalfilm Resistor 100k Ohm / 1% / 0,5 W - Pack of 5

Metalfilm Resistor
Great for amps and effects, low noise, small size, high power rating

Spezification:

  • Power: 0,5 Watt
  • Voltag: 350 V working / 700 V overload
  • Axial Leads
  • -55° C - 155° C
  • 9,4 * 3,2 mm
  • 1,0 %
  • RoHS
0,85 €
0,17 € per Piece

Elektrolyt 2,2 µF @ 63 Volt
Elektrolyt 2,2 µF @ 63 Volt
  • Type: Electrolytic capacitor
  • Capacitance: 2,2 µF
  • Voltage Rating: 63 V
  • Tolerance: - 10 % / +30 %
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 4,5 mm x 11 mm
  • Termination Style: axial

Images are for reference only. See Product Specifications

0,45 €

Mallory 150's 0,0022 µF / 630 VDC
Mallory 150's 0,0022 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
Specifications:
  • Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
  • Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
  • Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
  • Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
  • Self Inductance: 1 nH max. per 1 mm lead and body length
  • Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
  • Damp Heat Test: 95% RH @ +45 ºC for 21 days
  • Soldering: 260 ºC ±5 ºC for 10 s ±1 s
  • Long Term Storage Stability: ?C/C = ±3% after 2 years
1,35 €

Mallory 150's 0,1 µF / 630 VDC
Mallory 150's 0,1 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
Specifications:
  • Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
  • Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
  • Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
  • Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
  • Self Inductance: 1 nH max. per 1 mm lead and body length
  • Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
  • Damp Heat Test: 95% RH @ +45 ºC for 21 days
  • Soldering: 260 ºC ±5 ºC for 10 s ±1 s
  • Long Term Storage Stability: ?C/C = ±3% after 2 years
Color can differ from the picture.
3,10 €