Tube-Town EZ-Board Fender 5F1

TT-Chassis Fender Style 5F1 Tweed Champ
Optimized version of the 5F1 chassis for use with a separate power switch, isolated input and output jacks to prevent ground loops, Belton socket, replaceable power cord. Furthermore, this chassis is slightly longer than the original, which makes the work "inside" the chassis easier. Made of aluminum.

• Dimensions: 260 x  65 x 105 mm (W x H x D)
• Material: 2 mm Aluminium

Files

• Datasheet(PDF)

TT-Chassis Fender Style 5F1 Tweed Champ
Optimized version of the 5F1 chassis for use with a separate power switch, isolated input and output jacks to prevent ground loops, Belton socket, replaceable power cord. Furthermore, this chassis is slightly longer than the original, which makes the work "inside" the chassis easier. Made of aluminum.

• Dimensions: 260 x  65 x 105 mm (W x H x D)
• Material: 2 mm Aluminium

Files

• Datasheet(PDF)

TT-Chassis Fender 5F2 Style
Optimized version of the 5F2 chassis for use with a separate power switch, isolated input and output jacks to prevent ground loops, Belton socket, replaceable power cord. Furthermore, this chassis is slightly longer than the original, which makes the work "inside" the chassis easier. Made of aluminum.

• Dimensions: 260 x  65 x 105 mm (W x H x D)
• Material: 2 mm Aluminium

• Datasheet

Single tube, not matched

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

Files:

• Datasheet

• Type: Octal Socket Fender Style
• Version: Ceramic Chassis mount
•   w/mounting bracket
• Termination Style: solder lugs
• for Tube Type: EL34, E34L, 6L6, 6V6, 6550,
•   KT66/77/88 etc.

Socket Clamp / Tube Retainer fits for many octal base tubes.

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: M8 (7,8 mm)
• Termination: Solder lugs
• Dimension: 24 mm

• Type: Chickenhead, Mini
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 22.75 x 18.7 mm
• Mounting: Set-Screw

Fender Style Pilot Light Set

• Chassis Hole: 15,5 mm
• Threading: 9/16 - 24
• Jewel red

• with one fuse holders 5.0 x 20 mm
• Housing: polyamide
• for panel mounting
• IEC320 / C14
• Double-pole + protective ground 10 A/250 V
• single-pole fusing with bridge to the fuse holder at the L terminal
• fuse holder terminals for soldering

Copper Stranded Wire Insulated, 10m, green

The Hook up wire wire is a single-core multi-stranded copper cable with a conductor cross section of 0.14 mm² (AWG 26) and an outer diameter of 1.1 mm. The wire is insulated with PVC and is particularly suitable for wiring electrical devices or components. It is characterized by excellent heat and cold resistance and can be easily connected with wire end sleeves, spring or screw terminals.

• Cu switch wire LIYV 0.14 mm², flexible
• Cross-section: 0.14 mm²
• Construction: 18 x 0.1 mm
• Lead-free according to VDE 0812
• Temperature range: –15 / +70 °C
• Rated voltage: 500 V
• Length: 10 m reel

Copper Stranded Wire Insulated, 10m, Red

The Hook up wire wire is a single-core multi-stranded copper cable with a conductor cross section of 0.14 mm² (AWG 26) and an outer diameter of 1.1 mm. The wire is insulated with PVC and is particularly suitable for wiring electrical devices or components. It is characterized by excellent heat and cold resistance and can be easily connected with wire end sleeves, spring or screw terminals.

• Cu switch wire LIYV 0.14 mm², flexible
• Cross-section: 0.14 mm²
• Construction: 18 x 0.1 mm
• Lead-free according to VDE 0812
• Temperature range: –15 / +70 °C
• Rated voltage: 500 V
• Length: 10 m reel

Copper Stranded Wire Insulated, 10m, yellow

The Hook up wire wire is a single-core multi-stranded copper cable with a conductor cross section of 0.14 mm² (AWG 26) and an outer diameter of 1.1 mm. The wire is insulated with PVC and is particularly suitable for wiring electrical devices or components. It is characterized by excellent heat and cold resistance and can be easily connected with wire end sleeves, spring or screw terminals.

• Cu switch wire LIYV 0.14 mm², flexible
• Cross-section: 0.14 mm²
• Construction: 18 x 0.1 mm
• Lead-free according to VDE 0812
• Temperature range: –15 / +70 °C
• Rated voltage: 500 V
• Length: 10 m reel

• Color: black
• Size:
  • A: 10 mm
  • B: 12 mm
  • D: 17,5 mm
  • H: 6,8 mm
  • h: 2 mm
• Material: soft PVC,UL 94 V-2
• Operating temperatures: –30 to +60 °C

• Color: black
• Size:
  • A: 8 mm
  • B: 11 mm
  • D: 15,9 mm
  • H: 6,8 mm
  • h: 1,6 mm
• Material: soft PVC,UL 94 V-2
• Operating temperatures: –30 to +60 °C

• 1x internal and 1x external thread
• Thread size: M3
• External thread: 6.0 mm
• Internal thread: 6.0 mm
• Material: galvanised steel
• Length: 15 mm

TT-Chassis Fender 5F2 Style
Optimized version of the 5F2 chassis for use with a separate power switch, isolated input and output jacks to prevent ground loops, Belton socket, replaceable power cord. Furthermore, this chassis is slightly longer than the original, which makes the work "inside" the chassis easier. Made of aluminum.

• Dimensions: 260 x  65 x 105 mm (W x H x D)
• Material: 2 mm Aluminium

• Datasheet