Silver Mica 22 pF
Silver Mica 22 pF
Silver Mica 22 pF

Silver Mica 22 pF

Product No.:
csm22
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.001 kg per piece
0,54 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
EU legal guarantee notice
Description
Mica Capacitors
  • Voltage Rating:    500 V
  • Tolerance: 5%
  • Operating Temperature Range: - 50°C / + 150°C
  • Termination Style: radial
Safety Information
Safety Information for Electrical Components, Especially for Tube Amplifiers

For all electrical, electromechanical, and mechanical components, the specifications and operating parameters defined by the respective type standards generally apply.
Further information, where available, can be found in the respective data sheets and product descriptions included with the product.

General Information
  • NOT SUITABLE FOR CHILDREN – choking hazard due to small parts
  • NOT SUITABLE FOR UNTRAINED PERSONS – danger to life due to high voltages
  • The safety and processing requirements applicable to the component must be observed
  • CE conformity applies only when installed professionally
  • Warranty becomes void in case of improper handling
  • The operator is responsible for proper installation
  • Local regulations and VDE provisions must be complied with
  • Never exceed the rated power
  • Never exceed the rated voltages and currents
Required Expertise
  • Use of measuring instruments (multimeter, oscilloscope) and evaluation of measurement results
  • Safe handling of high voltages (up to 500V and more)
  • Reading and understanding circuit diagrams
  • Selection of appropriate tools
  • Knowledge of electrical components and their characteristics
  • First-aid knowledge for electrical accidents
  • Knowledge of VDE regulations and safety requirements
Specific Safety Instructions by Component Groups

Amplifier Tubes
  • Hazard due to high voltages
  • Hazard due to very high heat generation
  • Hazard due to glass breakage
  • Hazard due to UV radiation in case of defective tubes
Transformers & Chokes
For qualified personnel only! Installation and removal of power transformers, chokes, output transformers, and switching power supplies may only be carried out by qualified specialists.
  • Hazard due to high voltages
  • Risk of electric shock
  • Hazard due to heavy weight
  • Risk of injury
  • Fire hazard in case of overload
Capacitors
  • Explosion hazard if electrolytic capacitors are connected with incorrect polarity
  • Never exceed the rated operating voltage
  • Hazard due to high voltages
  • Risk of electric shock
  • Capacitors can store voltage for hours
Resistors
  • Hazard due to high heat generation
  • Hazard due to high voltages
  • Fire hazard in case of overload
  • Hazard due to hot surfaces
  • Risk of burns
Fuses
  • Replace only with identical ratings
  • Never bypass or "repair" a fuse
  • Identify the cause of fuse failure before replacement
  • Fire hazard when using incorrect fuse ratings
Relays & Switches
  • Hazard due to switching sparks
  • Contact damage in case of overload
  • Fire hazard due to defective contacts
Potentiometers & Rotary Switches
  • Hazard due to high voltages at the contacts
  • Fire hazard in case of overload
  • Mechanical damage may lead to short circuits
Diodes & Rectifiers
  • Hazard due to high voltages
  • Heat generation
  • Risk of burns
  • Observe correct polarity
  • Malfunction in case of incorrect polarity
  • Heat sinks required for power diodes
Sockets, Connectors & Cables
  • Hazard due to high voltages
  • Check insulation for damage
  • Ensure proper strain relief
  • Fire hazard due to undersized cables
  • Touch protection required for high-voltage connectors
Heat Sinks & Fans
  • Risk of burns due to hot surfaces
  • Risk of mechanical injury from moving fans
  • Electrical hazard in case of defective fan motors
Circuit Boards & Turret/Lug Terminals
  • Hazard due to sharp edges
  • Fire hazard during soldering
  • Hazard due to solder fumes
  • Adequate ventilation required
  • Observe ESD protection
Housing Parts & Mounting Hardware
  • Risk of injury due to sharp edges
  • Electrical safety must be ensured
  • Observe proper grounding
  • Provide adequate ventilation openings
  • Ensure protection against contact with live parts
Measuring Instruments & Indicators
  • Hazard due to high voltages in analog instruments
  • Fragile glass front
  • Risk of injury
Manufacturer
Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Orange Drop 716 0,01 µF @ 600 V
Orange Drop 716 0,01 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
2,55 €
Orange Drop 716 0,022 µF @ 600 V
Orange Drop 716 0,022 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
2,80 €
Orange Drop 716 0,033 µF @ 600 V
Orange Drop 716 0,033 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
3,30 €
Orange Drop 716 0,047 µF @ 600 V
Orange Drop 716 0,047 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
2,55 €
F+T 47 µF @ 500 Volt, axial
F+T 47 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 47 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 21 mm x 37 mm
  • Termination Style: axial
5,60 €
Hammond Choke 159Q
Hammond Choke 159Q
Filter choke, open bracket
  • Inductance (+/- 15%): 7 H
  • Resistance (+/- 15%): 100 Ohm
  • max Current DC: 150 mA
  • max Voltage DC: 500 V
  • Leads: min 12 cm
  • Hipot tested (100%) mit 1500 VAC
Files:
39,70 €
Orange Drop 0,0022 µF @ 600 V
Orange Drop 0,0022 µF @ 600 V

ORANGE DROP®, Low Loss

  • Type:  Polypropylene Film Capacitors
  • Voltage Rating: 600 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial
1,68 €
Orange Drop 716 0,001 µF @ 600 V
Orange Drop 716 0,001 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
2,65 €
Orange Drop 6PS-Series 0,0068 µF / 600 V
Orange Drop 6PS-Series 0,0068 µF / 600 V
ORANGE DROP®, PS Series
  • Type: Polyester Film Capacitor
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
1,85 €
Orange Drop 716 0,1 µF @ 600 V
Orange Drop 716 0,1 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
2,95 €
Resistor Metaloxide 5 Watts / 470 Ohms / Small Size
Resistor Metaloxide 5 Watts / 470 Ohms / Small Size
Metal Oxide Film Resistors
  • Termination Style: Axial     
  • Power Rating: 5 W     
  • Tolerance: 5 %     
  • Temperature Coefficient: 350 PPM / C     
  • Operating Temperature min/max: - 55 C / + 155 C      
  • Voltage Rating: 500 V     
  • Diameter: 8,5 mm     
  • Length: 25 mm     
  • Lead Diameter:  0.75 mm    
0,65 €
Silicon Tube Damper for 12AX7, EL84
Silicon Tube Damper for 12AX7, EL84
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 22 mm
  • Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,45 €
Silicon Tube Damper for EL34, KT77
Silicon Tube Damper for EL34, KT77
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 32 mm
  • Use tt-da15 for EH EL34
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €
Silicon Tube Damper for 6L6
Silicon Tube Damper for 6L6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 34 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €
Silicon Tube Damper for 6V6
Silicon Tube Damper for 6V6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 28 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €