Sovtek 5881 - QUAD
Sovtek 5881 - QUAD
Sovtek 5881 - QUAD

Sovtek 5881 - QUAD

Product No.:
so5881-quad
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
0.25 kg per Quad
126,40 €
31,60 € per Piece

incl. tax excl. Shipping costs

Bookmark
Ask Question
Description

4 tubes, matched as quad

The Sovtek 5881 delivers a warm, round tone that "sweetens" any vintage or modern guitar amp design. Chances are if an amp uses 6L6-style output tubes, it has Sovtek 5881's in its sockets. Built to rigid military standards, the 5881 will tolerate higher voltages than any other 6L6. In fact, they're frequently used as replacements for the old 7027 model in vintage Ampegs.

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Probe Bias Octal, assembled
Probe Bias Octal, assembled

Bias probe for indirect measurement of quiescent bias current of a tube. The adapter is inserted between the tube and the socket and gets connected to a standard voltmeter (not included). Pay attention to the quality of the measuring device and sufficiently charged batteries!

26,90 €

Marshall Style Knob Gold
Marshall Style Knob Gold
Marshall Style Knob, Gold
  • Material: Phenolic
  • Shaft Size: 6 - 6,4 mm
  • Size: 19,5 x 15,3 mm
  • Mounting: Set-Screw, hexagon
1,35 €

Power Jack w/ fuseholder
Power Jack w/ fuseholder
  • with one fuse holders 5.0 x 20 mm
  • Housing: polyamide
  • for panel mounting
  • Double-pole + protective ground 10 A/250 V
  • single-pole fusing with bridge to the fuse holder at the L terminal
  • fuse holder terminals for soldering
1,15 €

Cliff 6,3 mono input jack
Cliff 6,3 mono input jack

4 solder lugs, Marshall replacement

1,15 €

Mallory 150's 0,0047 µF / 630 VDC
Mallory 150's 0,0047 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
1,50 €

Mallory 150's 0,047 µF / 630 VDC
Mallory 150's 0,047 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
1,98 €

Miniature signal relays RY-24W-K, DPDT , 24V
Miniature signal relays RY-24W-K, DPDT , 24V
Miniature Signal Relays
2,39 €

Case Handle Dogbone Style imitation leather, black
Case Handle Dogbone Style imitation leather, black
  • Type: Case Handle imitation leather
  • Version: DogBone Style
  • Mounting fittings: Steel, nickel plated
  • Color: Black
9,50 €

Rubber foot with steel insert 38 x 20 mm
Rubber foot with steel insert 38 x 20 mm
  • Rubber foot with steel insert
  • Size: d = 38 mm, h = 20 mm
0,75 €

Socket Octal Belton, Chassis VT8
Socket Octal Belton, Chassis VT8
  • Type: Octal Socket Belton VT8
  • Version: High quality Micalex socket
  •   Chassis mount
  • Termination Style: solder lugs
  • for Tube Type: EL34, E34L, 6L6, 6V6, 6550,
  •   KT66/77/88 etc.
2,35 €

Tung-Sol 6L6 STR Reissue - PAIR
Tung-Sol 6L6 STR Reissue - PAIR
2 tubes, matched as pair

Premium power beam tetrode continuing in the Tung-Sol legacy. The ultimate in musical tone and smooth overdrive, STR delivers the sound that established Tung-Sol as the benchmark of quality.
Faithful re-issue of the original Tung-Sol STR, built to the same “Special Tube Request” specs of amp manufacturers of the 60s.
69,60 €
34,80 € per Piece

Rubber foot with steel insert 25 x 11 mm
Rubber foot with steel insert 25 x 11 mm
  • Rubber foot with steel insert
  • Size: d = 25 mm, h = 11 mm
0,38 €

Tolex Glue SG5, 500 ml
Tolex Glue SG5, 500 ml

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

11,95 €
23,90 € per Liter

Resistor Metaloxide 1 Watt / 220 kOhms
Resistor Metaloxide 1 Watt / 220 kOhms

Metaloxide film resistor

  • Nominal Power: 1 Watt
  • Max. cont. Working Voltage:: 500 V RMS
  • Tolerance: +/- 1%
  • Temperature range: -55° C...200° C
  • Ultra Small Size
  • Size: 6,3 x 2,4 mm
  • Flame retardant
0,17 €

JJ 16+16 µF @ 500 V
JJ 16+16 µF @ 500 V
  • Type: Cancap
  • Capacitance: 16 + 16 µF
  • Voltage Rating: 500 V
  • Tolerance: -10 % / +30 %
  • Operating Temperature Range: - 25°C / + 70 °C
  • Dimensions: Ø 35,5 mm x 51,4 mm
  • Termination Style: radial, solder-lugs
7,50 €