Main page » Cabinets and Housings » TTC Amp Chassis » TTC Combos » Standard Combos » Combo 5F1 - 8" - Tweed

Combo 5F1 - 8" - Tweed

Description

Inexpensive yet high quality 5F1 style combo with 8" speaker cutout.

Specifications

Outside dimensions
- Width: 345 mm
- Height: 310 mm
- Depth: 190 mm (bottom)
Chassis cutout: 162 x 55 mm
Tweed / Oxblood Style Gold
Speaker cutout: 8"
Loudspeaker: without
Wood: 18 mm plywood
TTC foreign product, Made in Asia

Manufacturer

Herstellerinformationen | Manufacturer Information
Tube-Town GmbH
Rumbergring 37
66969 Lemberg
Germany
www.tt-cabs.com

Customer reviews (2)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Peter D., 02/28/2024

Nice little cabinet, value for money. However: Caveat emptor! This cabinet will not accept the 5F1 chassis onto which the 291AEX Power tranny is fitted... This transformer bumps into the speaker frame...Use the tt-5E3-vpo transformer fitted... This transformer bumps into the speaker frame...Use the tt-5E3-vpo transformer
go to post

Recommended products:

Screw set for loudspeaker mounting

4 x Screw M5x20mm
4 x Washer M5
4 x T-Nut M5

1,48 €

Needed for:

TT-Kit 5F1

Set of componentes for building the TT 5F1 - V2020 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

Chassis
Transformers (Hammond 1760C, TT-5E3-VPO)
Resistors
Capacitors
Jacks
Light
Wires
Board
Switches
Tubes
Fuses & Fuesholder

NOT INCLUDED:

Knobs
Headshell or Combo

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !

295,00 €

TT-Kit 5F2

Set of componentes for building the TT 5F2 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

Chassis
Faceplate
Transformers
Resistors
Capacitors
Jacks
Light
Wires
Board
Switches
Tubes
Fuses & Fuesholder

NOT INCLUDED:

Knobs
Headshell or Combo

309,00 €

TT-Chassis Fender Style 5F1 Champ - Improved Version

TT-Chassis Fender Style 5F1 Tweed Champ
Optimized version of the 5F1 chassis for use with a separate power switch, isolated input and output jacks to prevent ground loops, Belton socket, replaceable power cord. Furthermore, this chassis is slightly longer than the original, which makes the work "inside" the chassis easier. Made of aluminum.

Dimensions: 260 x 65 x 105 mm (W x H x D)
Material: 2 mm Aluminium

Files

Datasheet(PDF)

29,80 €

Customers who bought this product bought also the following products:

TT-Kit 5F1

Set of componentes for building the TT 5F1 - V2020 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:

Chassis
Transformers (Hammond 1760C, TT-5E3-VPO)
Resistors
Capacitors
Jacks
Light
Wires
Board
Switches
Tubes
Fuses & Fuesholder

NOT INCLUDED:

Knobs
Headshell or Combo

295,00 €

Jensen P8R - 8 Ohms

The "Living legends" of Rock and Roll guitar sounds are back! Original designs of the late 40's and early 50's have been recreated using many of the original parts suppliers. Highly efficient AlNiCo magnets and seamed paper cones are the foundation for the famous JENSEN® Sound. JENSEN® "P" Series Vintage AlNiCo magnet speakers represent an important contribution to the paste, present and, no doubt, the future of rock and roll music. They are loved by generations of guitarists around the world.

Technical Details:

Size: 8"
Impedance: 8 Ohm
Rated Power (RMS): 25 W
Sensitivity @ 1 W, 1 m: 92,5 dB
Resonance Frequency fs: 130 Hz
Bell: No Bell

Files:

Datasheet

94,00 €

WGS G8C 8" / 20 W / 4 Ohm

The G8C ceramic speaker will breathe new life into your small combo. This little monster puts out some serious sound. A serious upgrade for your Fender Champ.

Thiele-Small Parameters

Resonant Frequency (Fs): 148.07 Hz
DC Resistance (Re): 6.7 Ohm
Coil Inductance (Le): 8 mH
Mechanical Q (Qms): 9.6715
Electromagnetic Q (Qes): 0.9538
Total Q (Qts): 0.8682
Compliance Equiv. Vol. (Vas): 0.257 cu ft
Mech. Compliance of Susp. (Cms): 110.714 mm/N
BL Product (BL): T-M
Diaphragm Mass Inc. Airload (Mms): 10.4353 grams
Surface Area of Cone (Sd): 214.0839 cm squared
Sound Pressure Level (spl): 95.78 db

69,00 €

Neutrik NP2RX - 6,3 mm (1/4") phone plug, right-angle, mono, silver

NP2RX

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
2 pole right-angle 1/4" professional phone plug, nickel contacts, black shell

Features & Benefits

All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
Extra slim 1/4" plug for highest packing density
Robust diecast shell in stylish design
Improved chuck type strain relief for reliable cable retention
Sleek design for best handling convenience
Precision machined one-piece contacts - avoid hook up of tip contact

Files:

4,50 €