Case Handle imitation leather, short, black
Case Handle imitation leather, short, black
Case Handle imitation leather, short, black
Preview: Case Handle imitation leather, short, black
Preview: Case Handle imitation leather, short, black
Preview: Case Handle imitation leather, short, black
Case Handle imitation leather, short, black
Case Handle imitation leather, short, black
Case Handle imitation leather, short, black
Case Handle imitation leather, short, black
Mobile Preview: Case Handle imitation leather, short, black
Mobile Preview: Case Handle imitation leather, short, black
Mobile Preview: Case Handle imitation leather, short, black

Case Handle imitation leather, short, black

Product No.:
hdl060A
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.0913 kg per piece
8,35 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description
Case Handle imitation leather, Dog-Bone Style
  • Length: 170 mm
  • Mounting fittings: Steel, nickel plated
  • Color: Black
  • without Screws and T-Nuts
Manufacturer
Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Recommended products:

Mounting Set for Handle Dogbone
Mounting Set for Handle Dogbone
Mounting set for case handles with 4 holes consisting of
  •     4 x T-Nut M4
  •     4 x Countersunk screw M4x25 mm, nickel-plated
1,05 €

Customers who bought this product bought also the following products:

Silicon Tube Damper for KT88
Silicon Tube Damper for KT88
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 45 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,90 €

Silicon Tube Damper for 12AX7, EL84
Silicon Tube Damper for 12AX7, EL84
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 22 mm
  • Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,45 €

Tube-Town Reverb Tank RCA cable, 48" (120 cm)
Tube-Town Reverb Tank RCA cable, 48" (120 cm)
  • Reverb Tank RCA cable
  • ca. 48" (120 cm)
  • Right-Angle plugs
  • Replaces Fender Reverb-Tank RCA cable
1,95 €

Fender Style Reverb Driver 3,5 W 125A20B
Fender Style Reverb Driver 3,5 W 125A20B
Reverb Driver, Fender Style, direct replacement for item 125A20B
  • Power: 3,5 W
  • 4 Ohm @ 14k5
  • 8 Ohm @ 29k
11,50 €

Toggle Switch APEM 644 H/2 DP3T - ON-(OFF)-ON
Toggle Switch APEM 644 H/2 DP3T - ON-(OFF)-ON
Toggle-Switch, used by Orange-Amps
  • Type: Toggle Switch
  • Version: DP3T - ON-(OFF)-ON
  • Rating:    15A / 250VAC, 10A / 400VAC
  • Contact resistance: 10 mΩ max. at 1A 2VDC
  • Insulation resistance: 1.000 MΩ min. at 500VDC
  • Dielectric strength: 2.000 Vrms 50 Hz min.
  • Operating Life:    10.000 cycles at full load
  • Termination Style: solder lug / quick-connect terminals

Files:

17,35 €

Alpha 100 kOhm linear
Alpha 100 kOhm linear
Panel Mount Potentiometer
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M8 (7,8 mm)
  • Termination: Solder lugs
  • Dimension: 24 mm
1,30 €

Alpha 100 kOhm log
Alpha 100 kOhm log
Panel Mount Potentiometer
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M8 (7,8 mm)
  • Termination: Solder lugs
  • Dimension: 24 mm
1,30 €

Alpha 1 MOhm log / Audio - Pack of 5
Alpha 1 MOhm log / Audio - Pack of 5
Panel Mount Potentiometer - Pack of 5
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M8 (7,8 mm)
  • Termination: Solder lugs
  • Dimension: 24 mm
4,90 €
0,98 € per Piece

Alpha 250 kOhm linear
Alpha 250 kOhm linear
Panel Mount Potentiometer
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M8 (7,8 mm)
  • Termination: Solder lugs
  • Dimension: 24 mm
1,30 €

Alpha 250k Ohm log / Audio - Pack of 5
Alpha 250k Ohm log / Audio - Pack of 5
Panel Mount Potentiometer - Pack of 5
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M8 (7,8 mm)
  • Termination: Solder lugs
  • Dimension: 24 mm
4,90 €
0,98 € per Piece

Bulb 6,3 Volt / #47 Base BA9s
Bulb 6,3 Volt / #47 Base BA9s

for Fender Pilot-Light

  • BA9s
  • #47
  • 6,3 V
0,70 €

SoZo Blue Molded 0.022 µF / 500 V
SoZo Blue Molded 0.022 µF / 500 V

SoZo BlueMolded Vintage Capacitors™

The BlueMolded line of capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders™. These capacitors amazingly capture vintage Fender tones of the Blackface era, and the famous 1959 tweed 5F6-A Bassman era.

5,85 €

Orange Drop 716 0,033 µF @ 600 V
Orange Drop 716 0,033 µF @ 600 V

ORANGE DROP®, 716 P Series

  • Polypropylene Film Capacitors, extended foil
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
1,95 €

US Fuse 1 A slow blow, Pack of 10
US Fuse 1 A slow blow, Pack of 10
  • Rated Voltage: 250 VAC
  • Contact caps: nickel-plated brass
  • Size: Ø 6,3 mm x 32 mm
  • Pack of 10
2,90 €
0,29 € per Piece

Self tap screw 4.2 X 16 mm silver, 25 pcs.
Self tap screw 4.2 X 16 mm silver, 25 pcs.
  • Self tap screw
  • flange head
  • DIN 968
  • 4.2 x 16 mm, silver
  • Extra Flat - ideal for the mounting of the corners
  • Pack with 25 pcs.
2,75 €
0,11 € per Piece