Tung-Sol EL34 / EL34B Reissue - PAIR
Tung-Sol EL34 / EL34B Reissue - PAIR
Tung-Sol EL34 / EL34B Reissue - PAIR

Tung-Sol EL34 / EL34B Reissue - PAIR

Product No.:
tsel34-pair
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
0.116 kg per Pair
64,90 €
32,45 € per Piece

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description
2 tubes, matched as pair

Premium high-voltage power pentode, featuring improved materials and workmanship over the original EL34B. Higher impedance design with increased touch responsiveness.

Files:

Manufacturer
Herstellerinformationen | Manufacturer Information
  • Sovtek
  • Electro Harmonix
  • Tung-Sol (Reissue)
  • Svetlana (Reissue)
  • Genalex (Reissue)
  • Mullard (Reissue)
New Sensor Corporation, 32-33 47th Avenue, Long Island City, NY 11101, USA

EU-Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de
Customer reviews (1)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

  • Yann C., 01/24/2024
    Wonderful in a Marshall amp (JCM2000 TSL60) ! Better than JJ or Electro-Harmonix IMHO, with more tone balance, deep and very defined low end and very pleasant top end proper to 6L6GC tubes. Closer to old RFTs than old Mullards... In modern production, only the JJ E34L rival in terms of sound richness, in a more aggressive style. Tung-Sol EL34B became my go-to tube for EL34 amps... pleasant top end proper to 6L6GC tubes. Closer to old RFTs than old Mullards... In modern production, only the JJ E34L rival in terms of sound richness, in a more aggressive style. Tung-Sol EL34B became my go-to tube for EL34 amps...
    go to post

Customers who bought this product bought also the following products:

JJ EL84 / 6BQ5 Red Label - QUARTETT
JJ EL84 / 6BQ5 Red Label - QUARTETT

4 tubes, matched as quad

JJ EL84 / 6BQ5 Red Label

Files:

67,00 €
16,75 € per Piece

JJ 12AT7 / ECC81 V1
JJ 12AT7 / ECC81 V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

JJ's version of the ECC81/12AT7 tube type with a warm and soft sound. Often used for phase inverters or reverb drivers.

Files:

19,35 €

Tube-Town EZ-Board Single Relais PCB
Tube-Town EZ-Board Single Relais PCB
  • Single Relais PCB for channel switching etc..
  • Size: 41 x 35 mm
  • For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).
1,10 €

Z-Diode BZX85 C12
Z-Diode BZX85 C12

Zener Diode BZX85/C12

  • 1.3 W
  • 12 V
  • DO41
0,12 €

TT E83CC (12AX7 / ECC83 / 7025) - V1
TT E83CC (12AX7 / ECC83 / 7025) - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Tube-Town E83CC Preamp-Tube

High-quality 12AX7 / ECC83 / 7025 preamp tube with low background noise and reduced feedback tendency due to short anode plates, as well as a powerful bass and a dense sound. Very suitable for input stages with high amplification or amplifiers with generally high gain.
Dropin replacement for all 12AX7, ECC83, 7025, and E83CC tubes.

Electrical Characteristics

  • Heater voltage (Uf): 6.3V or 12.6V
  • Heater current (If): 300mA at 6.3V, 150mA at 12.6V
  • Anode voltage (Ua): Maximum 300V
  • Grid voltages (Ug1): -2V (typical)
  • Grid voltages: -50V to 0V
  • Anode current (Ia): 1.2mA (typical)
  • Anode power dissipation: Maximum 1W per triode
  • Anode resistance (ra): 62.5kΩ
  • Amplification factor (μ): 100
  • Transconductance (S): 1.6mA/V
  • Input capacitance (Cin): 1.6pF
  • Output capacitance (Cout): 1.6pF

Mechanical Characteristics

  • Socket: B9A (Noval)
  • Number of pins: 9

Pin Configuration

  • 1 Anode (Triode 1)
  • 2 Grid (Triode 1)
  • 3 Cathode (Triode 1)
  • 4 Heater (f)
  • 5 Heater (f)
  • 6 Anode (Triode 2)
  • 7 Grid (Triode 2)
  • 8 Cathode (Triode 2)
  • 9 Center Heater (f)

Application Notes

  • Heater operation: The tube can be operated with 6.3V or 12.6V, depending on the circuit design.
  • Grid resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable functionality.
  • Coupling capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high-frequency interference.
25,90 €