Tube-Town EZ-Board 1 x 23 Turrets, black

Aluminium chassis based on the YAH100 chassis, but without cut-outs, drillings etc.

• Size: 483 x 238 x 70 mm
• Material: 2 mm AlMg3
• Reinforced corner joints
• Net Weight ca. 1,4 kg
• Mounting: with cage nuts (not included)
• Made in Germany

• Faceplate Template

This chassis is based on a regular HiWatt chassis which was used for amplifiers up to 100 Watt. The chassis was adapted and optimized for the YAH100 kit but get used for other HiWatt Clones too.

• Size: 483 x 238 x 70 mm
• Material: 1,5 mm Steel
• hot zinc dipped
• Reinforced corner joints
• Made in Germany
• Mounting: with cage nuts (not included)

• Faceplate Template

• 6,3 mm jack
• Same as Switchcraft 12A but with longer thread
• mono, switched
• Installation diameter: 10 mm

Files:

• Datasheet

• Rubber foot with steel insert
• Size: d = 38 mm, h = 25 mm
• Pack of 4

• Type:Toggle Switch
• Version:SPST, ON-OFF
• Rating: 3A / 250V, 6A / 125V
• Insulation resistance: 100MΩ min.
• Dielectric strength: 1000V min.
• Operating Life: 25.000 cycles
• Drill Ø: 12 mm
• Termination Style: solder-lugs

• Type: Classic Mini Fluted
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: d=15  h=10,5 mm
• Mounting: Set-Screw

• Type: Flutted Miniatur
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: d=12,8 mm, h = 15,5 mm
• Mounting: Set Screw

• Type: Pointer Knob "Classic"
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 27 x 15,6 mm
• Mounting: Set-Screw

Set of metal corners for housing consisting of:

• 8 x Cabinet corner w/ cutaway 2 leg, silver (pe-c1824n)
• Steel nickel plated
• High Quality
• 16 x Screws with extra flat head, silver

• Mounting fittings: Steel, nickel plated
• Color: Black
• WITHOUT NUTS AND SCREWS

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

• Safety Datasheet

• Size: L: 60 cm x W: 90 cm (only available in this size)
• Material: 100% Polypropylen
• Price per pcs.
• Actual shades may vary.

• FAQ Grillcloth