TT-Chassis 009 - Alu U - 480 x 160 x 65

• up to T 70 °C
• with one fuse holders 5.0 x 20 mm
• Housing: polyamide
• UL 94 V-0, black
• for snap-on mounting
• Double-pole + protective ground 10 A/250 V
• single-pole fusing with bridge to the fuse holder at the L terminal
• fuse holder terminals for soldering
• Design to IEC/EN 60320-1
• fuse holder to IEC/EN 60127-6
• Certifications: ENEC, Semko, UL, CSA

Spezification

• Size:
  • Outside(B x H x T): 513 x 220 x 205 mm
  • Innside:(B x H x T): 479 x 190 x 205 mm
• fits Chassis: #009 (siehe list bellow)
• Hardware: none
• Weight: ca. 4 kg
• Wood:
  • Body: 15 mm Birch Plywood
  • Front/Backpanels: Body: 15 mm Birch Plywood
• Surface: untreated

• Drawing

Spezification

• Size:
  • Outside(B x H x T): 513 x 220 x 205 mm
  • Innside:(B x H x T): 479 x 190 x 205 mm
• fits Chassis: #009 (siehe list bellow)
• Hardware: none
• Weight: ca. 4 kg
• Wood:
  • Body: 15 mm Birch Plywood
  • Front/Backpanels: Body: 15 mm Birch Plywood
• Surface: untreated

• Drawing

• Springs: 3
• Delay Type: medium
• Size: short
• Replacement: Mesa Boogie
• Accutronics by Accu-Bell, Made in Korea

• Reverb Driver 125A20B / 022921 Single-Ended
• Pri: 22800 Ohm
• Sec: 8 Ohm
• Power: 3,5 Watt

Files:

• Datasheet

• RCA Phono socket gold plated with Teflon insulation
• 1 x black
• 1 x red

Bourns PDA24 Potentiometer, SRT-Type (Standard Rotational Torque), smooth torque
This specialty potentiometer is commonly used in guitar and bass amplifiers. However, it is also suitable for use in electric guitars and basses. This product is designed with the features most widely requested by amplifier designers.

• Mounting: Panel
• Shaft Type: round, straight
• Terminal: Solder Terminal
• Power Rating:
  • Log: 250 mW (1/4W)
  • Lin: 500 mW (1/2 W)
• Max. Operation Voltage:
  • Log: 250 V
  • Lin: 500 V
• Standard Resistance Tolerance: 15%
• Operating Temperature: - 10 C bis +70 C
• Diameter Shaft:    6,35 mm
• LengthShaft: 19 mm
• Rotational Torque: Standard, 20 to 40 g-cm