Speaker Filter

Create your next signature sound with the Boston 10” guitar speaker. Spotlight your tone with a driver that delivers a warm, articulate bottom-end, scooped mids, and blooming highs.

This model includes a good old fashioned 1960’s style Alnico magnet assembly for an ultra-quick impulse response. The often-misunderstood magic of Alnico is that it partially and temporarily demagnetizes when you push them hard, applying a simple compression effect that adds a satisfying sense of sweetness that can't be beat.

American tone guitar speaker

• 10" (250 mm) steel basket diameter
• 20 watts, 8 ohm, 96 dB SPL
• 1" copper voice coil, Kraft paper former
• 6.8 oz alnico magnet
• USA-made seamed paper cone
• Size, Nominal (inch & mm): 10" (250 mm)
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 20 Watts
• Rated Impedance (Ω): 8
• Continuous Power (W): 20
• Program Power (W): 40
• Frequency Range (Hz): 55 - 6,200
• Sensitivity (dB SPL) ¹: 96
• Resonant Frequency (Fs) (Hz): 104
• DC Resistance (Re) (Ω): 6.3
• Voice Coil Inductance (Le) (mH): 0.35
• Mechanical Q Factor (Qms): 19.9
• Electrical Q Factor (Qes): 1.77
• Total Q Factor (Qts): 1.63
• Mechanical Resistance (Rms) (kg/s): 0.58
• Compliance Equivalent Volume (Vas) (L): 29.6
• Suspension Compliance (Cms) (mm/N): 0.1
• Surface Area of Diaphragm (Sd) (cm²): 397.6
• Moving Mass (Mms) (gm): 17.5
• Motor Force Factor (BL) (T•M): 6.4
• Efficiency (η₀) (%): 1.83
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 58.8
• Basket Type: Cold-rolled steel
• Terminal Size (mm): 5.2 x 0.5 (Dual lug)
• Voice Coil Diameter (mm): 25.4
• Voice Coil Wire Material: Copper
• Voice Coil Former Material: Kraft paper
• Voice Coil Winding Style: Single Layer
• Magnet Material: Alnico
• Magnet Weight (g): 192.77
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Felt

Turn heads with this 8" hempen guitar speaker, the Detroit 820. This model brings out an organic and vintage tweed sound, creating warm and full lows, strong and barky mids, and creamy highs to round out the top end.

The Detroit 820 is the perfect choice for guitarists looking for an upgrade to their blues or rock tone. High sensitivity, a hemp composite cone, a powerful ferrite magnet, dual-lug terminals for easy connectivity, and a sturdy steel basket come together to enhance your style and sound to make you the talk of the town.

American tone guitar speaker

• 8" (203 mm) steel basket diameter
• 20 watts, 4 ohm, 94 dB SPL
• 1" copper voice coil, Kraft paper former
• 10 oz ferrite magnet
• USA-made hemp cone
• Size, Nominal (inch & mm): 8" (203 mm)
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 4
• Rated Power IEC268-5 (W): 20 Watts
• Rated Impedance (Ω): 4
• Continuous Power (W): 20
• Program Power (W): 40
• Frequency Range (Hz): 80 - 10,000
• Sensitivity (dB SPL) ¹: 94
• Resonant Frequency (Fs) (Hz): 139
• DC Resistance (Re) (Ω): 3.4
• Voice Coil Inductance (Le) (mH): 0.12
• Mechanical Q Factor (Qms): 15.36
• Electrical Q Factor (Qes): 4.45
• Total Q Factor (Qts): 3.45
• Mechanical Resistance (Rms) (kg/s): 0.47
• Compliance Equivalent Volume (Vas) (L): 10.92
• Suspension Compliance (Cms) (mm/N): 0.16
• Surface Area of Diaphragm (Sd) (cm²): 221.67
• Moving Mass (Mms) (gm): 8.28
• Magnetic Gap Height (mm): 6.0
• Coil Winding Height (mm): 6.35
• Motor Force Factor (BL) (T•M): 2.36
• Efficiency (η₀) (%): 0.64
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 31.46
• Basket Type: Stamped steel with black powder coat
• Terminal Size (mm): 5.2 x 0.5
• Voice Coil Wire Material: Copper
• Voice Coil Former Material: Nomex
• Voice Coil Winding Style: Single Layer
• Magnet Material: Ferrite
• Magnet Weight (g): 283.5
• Cone Body Material: Hemp
• Dust Cap Material: Felt
• Spider Material: Cotton
• Net Weight (kg): 1.01

In a nod to the great Scottish rock bands, the Glasgow 1050 is the perfect option for guitar players seeking a powerful leading sound at the forefront of any number. This driver's cone is a special, concentrically ribbed paper cone made by guitar-cone expert Kurt Müller, creating a tone profile of rich and warm lows, a balanced mid-range, and screaming highs.

Upgrade your tube amp with this high sensitivity replacement driver—a model sporting a large 35 oz ceramic magnet and a 1.75” voice coils used in the ToneSpeak 12” speakers—to pack your tone with plenty of punch.

British tone guitar speaker

• 10" (250 mm) steel basket diameter
• 50 watts, 8 ohm, 96 dB SPL
• 1.75" aluminum voice coil, Nomex former
• 35 oz ferrite magnet
• Kurt Müller paper cone
• Size, Nominal (inch & mm): 10" (250 mm)
• Shape of Speaker: Round
• RoHS Compliant: No
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 50 Watts
• Rated Impedance (Ω): 8
• Program Power (W): 100
• Frequency Range (Hz): 65 - 5,500
• Sensitivity (dB SPL) ¹: 96
• Resonant Frequency (Fs) (Hz): 109
• DC Resistance (Re) (Ω): 7.1
• Voice Coil Inductance (Le) (mH): 0.39
• Mechanical Q Factor (Qms): 18.06
• Electrical Q Factor (Qes): 0.85
• Total Q Factor (Qts): 0.81
• Mechanical Resistance (Rms) (kg/s): 0.83
• Compliance Equivalent Volume (Vas) (L): 21.86
• Suspension Compliance (Cms) (mm/N): 0.10
• Surface Area of Diaphragm (Sd) (cm²): 397.61
• Moving Mass (Mms) (gm): 21.81
• Motor Force Factor (BL) (T•M): 11.22
• Efficiency (η₀) (%): 3.22
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 128.99
• Basket Type: Stamped steel
• Terminal Size (mm): 5.2 x 0.5
• Voice Coil Diameter (mm): 44.5
• Voice Coil Wire Material: Copper clad aluminum
• Voice Coil Former Material: Nomex
• Voice Coil Winding Style: Single Layer
• Magnet Material: Ferrite
• Magnet Weight (g): 993.23
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Cloth

Give your listeners a tailored response of a sharp and punchy bottom-end, scooped mids, and soaring highs--keeping you in the fray at the extremes while maintaining a nice sense of sweetness in the middle of your range.

This classic 10" guitar speaker delivers a vintage sound, thanks to an alnico magnet motor that softens the tone without losing the immediacy. In addition, a vintage Kurt Müller paper cone maintains a lush profile, full-bodied sound profile that compliments your playing.

British tone guitar speaker

• 10" (250 mm) steel basket diameter
• 20 watts, 8 ohm, 96 dB SPL
• 1" copper voice coil, Kraft paper former
• 6.8 oz alnico magnet
• Kurt Müller guitar cone
• Size, Nominal (inch & mm): 10" (250 mm)
• Shape of Speaker: Round
• Speaker Type: Guitar Speaker
• Application: Musical Instruments
• Environment: Indoor
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 20 Watts
• Rated Impedance (Ω): 8
• Continuous Power (W): 20
• Program Power (W): 40
• Frequency Range (Hz): 65 - 6,300
• Sensitivity (dB SPL) ¹: 96
• Resonant Frequency (Fs) (Hz): 112
• DC Resistance (Re) (Ω): 6.20
• Voice Coil Inductance (Le) (mH): 0.35
• Mechanical Q Factor (Qms): 18.38
• Electrical Q Factor (Qes): 1.99
• Total Q Factor (Qts): 1.80
• Mechanical Resistance (Rms) (kg/s): 0.61
• Compliance Equivalent Volume (Vas) (L): 28.27
• Suspension Compliance (Cms) (mm/N): 0.1
• Surface Area of Diaphragm (Sd) (cm²): 397.61
• Moving Mass (Mms) (gm): 15.84
• Motor Force Factor (BL) (T•M): 5.91
• Efficiency (η₀) (%): 1.93
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 56.48
• Basket Type: Cold-rolled steel
• Terminal Size (mm): 5.2 x 0.5 (Dual lug)
• Voice Coil Diameter (mm): 25.4
• Voice Coil Wire Material: Copper
• Voice Coil Former Material: Kraft paper
• Voice Coil Winding Style: Single Layer
• Magnet Material: Alnico
• Magnet Weight (g): 192.77
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Felt

The Liverpool 1275 is the classic British rock tone,inspired by tones from the 80’s. A complex, thick and vocal midrange cuts through the upper-register, while nice, full, lower-mid grunt completes the warm, gutsy, tight lows. The highs, while clear, open and articulate remain warm and ear pleasing.

Spezification:

• Nominal Impedance (Z): 16 Ohm
• Rated Power IEC268-5: 75 Watt
• Sensitivity (@1W/1 m): 100 dB/SPL
• Frequency range: 75 – 5000 Hz
• Resonant Frequency (Fs): 83 Hz
• Voice Coil Diameter: 1,75"

Files:

• Datasheet

The Liverpool 1275 is the classic British rock tone,inspired by tones from the 80’s. A complex, thick and vocal midrange cuts through the upper-register, while nice, full, lower-mid grunt completes the warm, gutsy, tight lows. The highs, while clear, open and articulate remain warm and ear pleasing.

Spezification:

• Nominal Impedance (Z): 8 Ohm
• Rated Power IEC268-5: 75 Watt
• Sensitivity (@1W/1 m): 100 dB/SPL
• Frequency range: 75 – 5000 Hz
• Resonant Frequency (Fs): 83 Hz
• Voice Coil Diameter: 1,75"

Files:

• Datasheet

Even and balanced from top to bottom. No sacrifice in tone for using higher power and/or higher gain with this speaker, it is crammed full of balance, definition, and most importantly, control. This speaker plays well with pedals and is slow to break up.

Check out on YouTube: SICK METAL TONES you have NEVER HEARD BEFORE!

Spezification:

• Nominal Impedance (Z): 8Ohm
• Rated Power IEC268-5: 90 Watt
• Sensitivity (@1W/1 m): 100 dB/SPL
• Frequency range: 80 – 5000 Hz
• Resonant Frequency (Fs): 85 Hz
• Voice Coil Diameter 1.75”

Files:

• Datasheet

 

YOU SAY YOU WANT A SPEAKER, BUT YOU CAN'T MAKE UP YOUR MIND...

A broad response ideal for either lead or rhythm guitar, as well as deep range for dropped tuning, lets the Minneapolis breathe new life into your tone. An American made, purple paper cone (honoring our favorite local legend), is anchored into a robust steel basket, and delivers a strong and even tone for lows, mids, and highs.

This 10" model provides high sensitivity by using a high-power ferrite magnet and the same 1.75” voice coil used in the 12” ToneSpeak series; a perfect upgrade for anyone looking to add a little more oomph to their tube amp.

American tone guitar speaker

• 10" (250 mm) steel basket diameter
• 50 watts, 8 ohm, 97 dB SPL
• 1.75" aluminum voice coil, Nomex former
• USA-made purple paper cone
• 35 oz ferrite magnet
• Size, Nominal (inch & mm): 10" (250 mm)
• Shape of Speaker: Round
• Speaker Type: Guitar Speaker
• Application: Musical Instruments
• Environment: Indoor
• RoHS Compliant: Yes
• Nominal Impedance (Z) (Ω): 8
• Rated Power IEC268-5 (W): 50 Watts
• Rated Impedance (Ω): 8
• Continuous Power (W): 50
• Program Power (W): 100
• Frequency Range (Hz): 55 - 5,500
• Sensitivity (dB SPL) ¹: 97
• Resonant Frequency (Fs) (Hz): 97
• DC Resistance (Re) (Ω): 7.1
• Voice Coil Inductance (Le) (mH): 0.41
• Mechanical Q Factor (Qms): 18.89
• Electrical Q Factor (Qes): 0.72
• Total Q Factor (Qts): 0.7
• Mechanical Resistance (Rms) (kg/s): 0.74
• Compliance Equivalent Volume (Vas) (L): 26.2
• Suspension Compliance (Cms) (mm/N): 0.1
• Surface Area of Diaphragm (Sd) (cm²): 397.6
• Moving Mass (Mms) (gm): 23.83
• Coil Winding Height (mm): 10.92
• Motor Force Factor (BL) (T•M): 11.73
• Efficiency (η₀) (%): 3.21
• Efficiency Bandwidth Product (EBP) (Fs/Qes): 134.58
• Basket Type: Stamped steel
• Terminal Size (mm): 5.2 x 0.5
• Voice Coil Diameter (mm): 44.5
• Voice Coil Wire Material: Copper clad aluminum
• Voice Coil Former Material: Nomex
• Voice Coil Winding Style: Single Layer
• Magnet Material: Ferrite
• Magnet Weight (g): 992.23
• Cone Body Material: Paper composite
• Cone Surround Material: Paper composite
• Dust Cap Material: Cloth

Even and balanced from top to bottom. No sacrifice in tone for using higher power and/or higher gain with this speaker, it is crammed full of balance, definition, and most importantly, control. This speaker plays well with pedals and is slow to break up.

Spezification:

• Nominal Impedance (Z): 8 Ohm
• Rated Power IEC268-5: 90 Watt
• Sensitivity (@1W/1 m): 100 dB/SPL
• Frequency range: 80 – 5000 Hz
• Resonant Frequency (Fs): 85 Hz
• Voice Coil Diameter 1.75”

Files:

• Datasheet

 

Headroom, clarity, balanced response, power...
These terms have become synonymous with a vintage American design that is known and sought the world over.  WGS now pays tribute to this classic with our WGS12L. However like all of our designs, we didn't set out to make a clone.  With this model we paid extra special attention to the details, producing a speaker that delivers that same even response without sounding sterile and lifeless.  Boasting a cast frame, 2.5" voice coil and a 200 watt rating, and clocking in at 18 pounds, this beast is loaded for bear.  As a welcome addition to the WGS fleet, this speaker is definitely our battleship.

Note from the boss: "We compared both the EVM 12L and the WGS 12L in an 806 cabinet and it was almost impossible to tell them apart. The WGS 12L is a great alternative to the original and we recommend it without reservation as a perfect replacement for the EVM 12L."

Thiele-Small Parameters (8 Ohm Version)

• Resonant Frequency (Fs): 49.58 Hz
• DC Resistance (Re): 5.84 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 7.41
• Electromagnetic Q (Qes): 0.25
• Total Q (Qts): 0.24
• Compliance Equiv. Vol. (Vas): 50.51 cu ft
• Mech. Compliance of Susp. (Cms): 0.27 mm/N
• BL Product (BL): 16.74 T-M
• Diaphragm Mass Inc. Airload (Mms): 38.77 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.67 db

Headroom, clarity, balanced response, power...
These terms have become synonymous with a vintage American design that is known and sought the world over.  WGS now pays tribute to this classic with our WGS12L. However like all of our designs, we didn't set out to make a clone.  With this model we paid extra special attention to the details, producing a speaker that delivers that same even response without sounding sterile and lifeless.  Boasting a cast frame, 2.5" voice coil and a 200 watt rating, and clocking in at 18 pounds, this beast is loaded for bear.  As a welcome addition to the WGS fleet, this speaker is definitely our battleship.

Note from the boss: "We compared both the EVM 12L and the WGS 12L in an 806 cabinet and it was almost impossible to tell them apart. The WGS 12L is a great alternative to the original and we recommend it without reservation as a perfect replacement for the EVM 12L."

Thiele-Small Parameters

• Resonant Frequency (Fs): 49.58 Hz
• DC Resistance (Re): 5.84 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 7.41
• Electromagnetic Q (Qes): 0.25
• Total Q (Qts): 0.24
• Compliance Equiv. Vol. (Vas): 50.51 cu ft
• Mech. Compliance of Susp. (Cms): 0.27 mm/N
• BL Product (BL): 16.74 T-M
• Diaphragm Mass Inc. Airload (Mms): 38.77 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.67 db

The 12” BlackHawk™ alnico speaker has finally arrived! Now your 1x12” 30-50 watt amp can really rock. This guitar speaker will give your amp pristine top end, tight mids, and all just the right amount of warmth and bottom end. This speaker is the 50 watt version of the 12” Black & Blue alnico. This 50 watt version has more low end than its 15 watt cousin. This speaker is the perfect upgrade for your VOX™ AC30. Drop in replacement for Celestion™ Gold™ alnico speaker.

Note: the naming is a bit awkward, because the difference to the Blackhawk HP is enormous. More correct would be the name "Black & Blue HP", so the 50 watt version of the Black&Blue or Celestion Blue.

Mounting Information

• Diameter: 12.2”
• Overall depth: 6.4”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

Thiele-Small Parameters

• Resonant Frequency (Fs): 110.42 Hz
• DC Resistance (Re): 7.98 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 14.62
• Electromagnetic Q (Qes): 1.06
• Total Q (Qts): 0.98
• Compliance Equiv. Vol. (Vas): 13.30 cu ft
• Mech. Compliance of Susp. (Cms): .07 mm/N
• BL Product (BL): 12.42 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.69 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 100.08 db

The 12” BlackHawk™ alnico speaker has finally arrived! Now your 1x12” 30-50 watt amp can really rock. This guitar speaker will give your amp pristine top end, tight mids, and all just the right amount of warmth and bottom end. This speaker is the 50 watt version of the 12” Black & Blue alnico. This 50 watt version has more low end than its 15 watt cousin. This speaker is the perfect upgrade for your VOX™ AC30. Drop in replacement for Celestion™ Gold™ alnico speaker.

Note: the naming is a bit awkward, because the difference to the Blackhawk HP is enormous. More correct would be the name "Black & Blue HP", so the 50 watt version of the Black&Blue or Celestion Blue.

Mounting Information

• Diameter: 12.2”
• Overall depth: 6.4”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

Thiele-Small Parameters

• Resonant Frequency (Fs): 110.42 Hz
• DC Resistance (Re): 7.98 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 14.62
• Electromagnetic Q (Qes): 1.06
• Total Q (Qts): 0.98
• Compliance Equiv. Vol. (Vas): 13.30 cu ft
• Mech. Compliance of Susp. (Cms): .07 mm/N
• BL Product (BL): 12.42 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.69 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 100.08 db

The high-power 12” BlackHawk™ alnico speaker has arrived! Now your 1x12” 100 watt amp can really purr.... This guitar speaker will give your amp pristine top end, tight mids, and all just the right amount of warmth and bottom end.
Drop in replacement for EV™ SRO™ speaker.

Unit Weight:  9 pounds

Mounting Information

• Diameter: 12.2”
• Overall depth: 6.4”
• Cut-out diameter: 11.1”
• Mounting slot dimensions: 0.31”
• Number of mounting slots: 8

Thiele-Small Parameters

• Resonant Frequency (Fs): 88.14 Hz
• DC Resistance (Re): 7.84 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 6.32
• Electromagnetic Q (Qes): 1.03
• Total Q (Qts): 0.88
• Compliance Equiv. Vol. (Vas): 21.04 cu ft
• Mech. Compliance of Susp. (Cms): 0.11 mm/N
• BL Product (BL): 11.16 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.46 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.26 db

The ET10 is the 10” version of one of our most popular speakers: the ET65. The ET10 boasts a tone reminiscent of its 12” counterpart, but with a bit more of a pronounced midrange. The low end from this 10 is surprisingly heady, but remains tight in all situations. Top it off with a smooth but articulate top end, and you have one of the most highly anticipated ten inch speakers to date.

Unit Weight: 6 lbs

Thiele-Small Parameters

• Resonant Frequency (Fs): 113.32 Hz
• DC Resistance (Re): 6.626 Ohm
• Coil Inductance (Le): 0.16 mH
• Mechanical Q (Qms): 6.72
• Electromagnetic Q (Qes): 0.72
• Total Q (Qts): 0.65
• Compliance Equiv. Vol. (Vas): 17.06 cu ft
• Mech. Compliance of Susp. (Cms): 0.11 mm/N
• BL Product (BL): 10.63 T-M
• Diaphragm Mass Inc. Airload (Mms): 17.25 grams
• Surface Area of Cone (Sd): 324.29 cm squared
• Sound Pressure Level (spl): 100.17 db

The ET10 is the 10” version of one of our most popular speakers: the ET65. The ET10 boasts a tone reminiscent of its 12” counterpart, but with a bit more of a pronounced midrange. The low end from this 10 is surprisingly heady, but remains tight in all situations. Top it off with a smooth but articulate top end, and you have one of the most highly anticipated ten inch speakers to date.

Unit Weight: 6 lbs

Thiele-Small Parameters

• Resonant Frequency (Fs): 113.32 Hz
• DC Resistance (Re): 6.626 Ohm
• Coil Inductance (Le): 0.16 mH
• Mechanical Q (Qms): 6.72
• Electromagnetic Q (Qes): 0.72
• Total Q (Qts): 0.65
• Compliance Equiv. Vol. (Vas): 17.06 cu ft
• Mech. Compliance of Susp. (Cms): 0.11 mm/N
• BL Product (BL): 10.63 T-M
• Diaphragm Mass Inc. Airload (Mms): 17.25 grams
• Surface Area of Cone (Sd): 324.29 cm squared
• Sound Pressure Level (spl): 100.17 db

The 12” ET65™ speakers has big and creamy lows blend with tight midrange and sparkling highs for some of the best tones ever created! This speaker is for classic rock, country, and blues. Upgrade from your Celestion™ G12-65.

Unit Weight:  7.5 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 98.69 Hz
• DC Resistance (Re): 8.05 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 5.38
• Electromagnetic Q (Qes): 1.10
• Total Q (Qts): 0.91
• Compliance Equiv. Vol. (Vas): 16.75 cu ft
• Mech. Compliance of Susp. (Cms): 0.09 mm/N
• BL Product (BL): 11.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.51 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.45 db

The ET65's creamy lows blend with tight midrange and sparkling highs for some of the best tones ever created. This speaker is for classic rock, country, and blues. Upgrade from your Celestion™ G12-65.

Possibly the best WGS speaker combination we can recommend is the ET65 paired with a Veteran 30™. Your cabinet will sound more full and colorful than you ever imagined. If you are putting together a 4x12 cab, we suggest either an "X" pattern or the ET65's on top of the Veteran 30's.

Unit Weight:  7.5 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 98.69 Hz
• DC Resistance (Re): 8.05 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 5.38
• Electromagnetic Q (Qes): 1.10
• Total Q (Qts): 0.91
• Compliance Equiv. Vol. (Vas): 16.75 cu ft
• Mech. Compliance of Susp. (Cms): 0.09 mm/N
• BL Product (BL): 11.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.51 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.45 db

The 12” ET65™ speakers has big and creamy lows blend with tight midrange and sparkling highs for some of the best tones ever created! This speaker is for classic rock, country, and blues. Upgrade from your Celestion™ G12-65.

Unit Weight:  7.5 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 98.69 Hz
• DC Resistance (Re): 8.05 Ohm
• Coil Inductance (Le): 0.35 mH
• Mechanical Q (Qms): 5.38
• Electromagnetic Q (Qes): 1.10
• Total Q (Qts): 0.91
• Compliance Equiv. Vol. (Vas): 16.75 cu ft
• Mech. Compliance of Susp. (Cms): 0.09 mm/N
• BL Product (BL): 11.58 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.51 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.45 db

The ET90 is our lastest addition to the ET65 lineage.  Taking its core sound from the ET65, the ET90 gives you more all the way around.  We went to larger motor and a beefier voice coil on this model.  The result is more headroom, more power handling and a bigger feel.  If you've been looking for classic British tone with an "open" feel and a lot of power, the ET90 is your new favorite.

Thiele-Small Parameters

• Resonant Frequency (Fs): 100.14 Hz
• DC Resistance (Re): 8.04 Ohm
• Coil Inductance (Le): 0.33 mH
• Mechanical Q (Qms): 6.08
• Electromagnetic Q (Qes): 0.78
• Total Q (Qts): 0.69
• Compliance Equiv. Vol. (Vas): 16.03 cu ft
• Mech. Compliance of Susp. (Cms): 0.08 mm/N
• BL Product (BL): 13.95 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.95 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.94 db

The ET90 is our lastest addition to the ET65 lineage.  Taking its core sound from the ET65, the ET90 gives you more all the way around.  We went to larger motor and a beefier voice coil on this model.  The result is more headroom, more power handling and a bigger feel.  If you've been looking for classic British tone with an "open" feel and a lot of power, the ET90 is your new favorite.

Thiele-Small Parameters

• Resonant Frequency (Fs): 100.14 Hz
• DC Resistance (Re): 8.04 Ohm
• Coil Inductance (Le): 0.33 mH
• Mechanical Q (Qms): 6.08
• Electromagnetic Q (Qes): 0.78
• Total Q (Qts): 0.69
• Compliance Equiv. Vol. (Vas): 16.03 cu ft
• Mech. Compliance of Susp. (Cms): 0.08 mm/N
• BL Product (BL): 13.95 T-M
• Diaphragm Mass Inc. Airload (Mms): 29.95 grams
• Surface Area of Cone (Sd): 366.10 cm squared
• Sound Pressure Level (spl): 99.94 db

The G10C is a 10" ceramic speaker with a 30 oz motor and seamed cone.

Unit Weight: 7 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 79.61 Hz
• DC Resistance (Re): 6.3 Ohm
• Coil Inductance (Le): 8 mH
• Mechanical Q (Qms): 7.7956
• Electromagnetic Q (Qes): 0.6822
• Total Q (Qts): 0.6273
• Compliance Equiv. Vol. (Vas): 1.349 cu ft
• Mech. Compliance of Susp. (Cms): 198.897 mm/N
• BL Product (BL): 9.92 T-M
• Diaphragm Mass Inc. Airload (Mms): 20.0945 grams
• Surface Area of Cone (Sd): 366.0962 cm squared
• Sound Pressure Level (spl): 96.35 db

The G10C is a 10" ceramic speaker with a 35 oz magnet and seamed cone.

Unit Weight: 7 pounds

Thiele-Small Parameters

• Resonant Frequency (Fs): 79.61 Hz
• DC Resistance (Re): 6.3 Ohm
• Coil Inductance (Le): 8 mH
• Mechanical Q (Qms): 7.7956
• Electromagnetic Q (Qes): 0.6822
• Total Q (Qts): 0.6273
• Compliance Equiv. Vol. (Vas): 1.349 cu ft
• Mech. Compliance of Susp. (Cms): 198.897 mm/N
• BL Product (BL): 9.92 T-M
• Diaphragm Mass Inc. Airload (Mms): 20.0945 grams
• Surface Area of Cone (Sd): 366.0962 cm squared
• Sound Pressure Level (spl): 96.35 db

The G10C/S is the smooth cone version of our G10C. It offers a slightly rounder top end with smoother breakup, while maintaining the punch and clarity you already love in a 10" speaker. It's really great for taming the top end in bright amps with its warm sound and depth in tone.

Thiele-Small Parameters

• Resonant Frequency (Fs): 94.49 Hz
• DC Resistance (Re): 6.3 Ohm
• Coil Inductance (Le): 8 mH
• Mechanical Q (Qms): 8.081
• Electromagnetic Q (Qes): 0.6081
• Total Q (Qts): 0.5655
• Compliance Equiv. Vol. (Vas): 1.056 cu ft
• Mech. Compliance of Susp. (Cms): 155.752 mm/N
• BL Product (BL): T-M
• Diaphragm Mass Inc. Airload (Mms): 18.2153 grams
• Surface Area of Cone (Sd): 366.0962 cm squared
• Sound Pressure Level (spl): 98.02 db