Main page » Tubes » Sovtek » Sovtek 12AX7 / ECC83 WB

Sovtek 12AX7 / ECC83 WB

Product No.:: so12ax7wb
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.018 kg per piece

23,90 €

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

The Sovtek 12AX7WB has more gain and saturation than the Sovtek 12AX7WA. Its warmer, darker sound is preferred by Rivera, VHT, Demeter, and Kendrick, among other manufacturers.

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Silicon Tube Damper for 12AX7, EL84

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

0,45 €

Mallory 150's 0,68 µF / 100 V DC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

2,95 €

Signal wire 2 x 0,14 mm² w/ single shielding, 1m

Signal wire Li2YDY 2 x 0,14 mm²
with single shielding and insulation
Diameter Outside: ca. 3 x6 mm
Voltage Rating: max. 50 / 75V AC/DC
Temperature range: -30 bis +70 C°
Conductor resistance: 135 Ohm / km @ 20 C°
Insulation resistance: min. 20 MOHm x km @ 20 C°
Length: 1 m

1,40 €

Alpha Potentiometer 100 kOhm log / 16 mm

Power Rating: 0,125 W
Voltage Rating: 150 V AC
Tolerance: 20%
Shaft: 6,3 mm, Solid Shaft

0,95 €

Neutrik NMJ4HC-S - 6,3 mm Mono switched

1/4" mono jack, switched, with chrome ferrule and standard solder lugs
Mounting nut included

Wide body and extremely durable contacts
Mates with all mono A-gauge plugs acc. EIA RS-453 standard

1,35 €

Sovtek 12AX7 / ECC83 LPS

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.