Main page » Components » Transformer » Power Transformer » Others » Powertransformer 230 / 325 / 6,3 / G5 V3

Preview: Powertransformer 230 / 325 / 6,3 / G5 V3

Powertransformer 230 / 325 / 6,3 / G5 V3

Mobile Preview: Powertransformer 230 / 325 / 6,3 / G5 V3

Description

Powertransformer for the G5 Amp-Project

Pri: 230 V (blue-blue)
Sec.1: 325 V @ 0,130 A (red-red)
Sec. 2: 6,3 V @ 3,3 A (brown-brown)

Files

Datasheet

Information about the manufacturer

Herstellerinformationen | Manufacturer Information

Tube-Town GmbH
Rumbergring 37
D-66969 Lemberg
eMail: info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Recommended products:

Needed for:

Customers who bought this product bought also the following products:

Power Cord 2 m black - Loose cable ends

Angled Protective Contact Cable for Confectioning, 2m, Black

Protective contact plug (Type F, CEE 7/7) > Loose cable ends

The power cable with open ends and crimped wire end sleeves for confectioning. This power cable comes with a plug (angled) for connecting to electrical devices. The power cable can be creatively and versatilely used.

Technical Specifications

Connection Type: Protective contact plug (Type F, CEE 7/7)
Connection 2 Type: Loose cable ends
Maximum Current Rating: 10 A
Operating Voltage: 250 V (AC)
Cable Length: 2m
Conductor Cross-section: 0.75 mm²
Cable Type: H05-VV-F3G
Color: Black
Markings: CE

3,75 €

Finder Relays DPDT , 125V 2A, 6V

Relays, type Finder Dual-In-Line-Relais 2,0 A for low breaking capacity.

Compact dimensions:20.3 x 10.1 x 11.4 mm, grid according to wiring diagram
Function: 2 x changeover contacts
Constant/inrush current: 3.0 A/2.0 A
Rated/switching voltage: 125 VAC/250 VAC
Breaking capacity AC 1/AC 15 (230 V): 125 VA/25 VA
Switching current DC 1: 2.0 A/30 V, 0.3 A/110 V
Minimum switching load: 10 mW (0.1 V/1.0 mA)
Contact material: AgNi+Au (5.0 µm)
Useful mechanical life DC: 10 x 10 exp6 switching cycles
Electrical life AC 1: 100 x 10 exp3 switching cycles
Insulation coordination EN 61810-5: 1.2 kV/2
Electric strength coil/contact (1.2/50 µs): 1.5 kV
Response/release time: 6.0 ms/2.0 ms
Ambient temperature: –40 to +85 °C
Relay protection class: RT III
Certifications: CSA, UL, GOST

Files:

Datasheet

2,60 €

EH 7025 (12AX7 / ECC83 HQ)

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

19,80 €