Main page » Speaker » by manufacturers » Mojotone » Mojotone Anthem 12" / 40 W / 8 Ohm - AlNiCo

Preview: Mojotone Anthem 12" / 40 W / 8 Ohm - AlNiCo

Mojotone Anthem 12" / 40 W / 8 Ohm - AlNiCo

Mobile Preview: Mojotone Anthem 12" / 40 W / 8 Ohm - AlNiCo

Description

This speaker is an absolute gem for guitarists. With a powerful 40-watt rating and vintage cream colored basket with gold appointments, there's more to this speaker than meets the eye. The Alnico magnet provides a warm and rich tone that's simply irresistible to most players. It's what sets this speaker apart from our popular Anthem 12" ceramic magnet speakers. The 40-watt rating means this speaker can handle a decent amount of power while providing plenty of headroom. Mojotone is known for its quality craftsmanship, and this speaker is no exception. The materials are top-notch, ensuring a durable and reliable product that will last you a long time. It's built to take a beating while producing an amazing tone.

Technical Data:

Manufacturer

Herstellerinformationen | Manufacturer Information
Mojo Musical Supply
513 S. Dudley St
NC 28425 Burgaw
USA
https://www.mojotone.com/

EU Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

WGS G12 C/S 12" / 75 W / 8 Ohm

If you are looking for a speaker with a classic American vibe, but need a smoother more soulful top end, look no further than the WGS G12C/S. This is based on our popular G12C, but with a smooth cone, felt dust cap and just the right amount of edge treatment. This speaker works great in amps where you are going for that big American clean but just need it a little softer up top. Destined to be another WGS classic!

Thiele-Small Parameters

Resonant Frequency (Fs): 95.68 Hz
DC Resistance (Re): 7.47 Ohm
Coil Inductance (Le): 0.28 mH
Mechanical Q (Qms): 14.56
Electromagnetic Q (Qes): 0.73
Total Q (Qts): 0.69
Compliance Equiv. Vol. (Vas): 19.70 cu ft
Mech. Compliance of Susp. (Cms): 0.10 mm/N
BL Product (BL): 12.83 T-M
Diaphragm Mass Inc. Airload (Mms): 26.70 grams
Surface Area of Cone (Sd): 366.10 cm squared
Sound Pressure Level (spl): 99.54 db

119,00 €

Mojotone BV-25M British Vintage 12" / 25 W / 16 Ohm

Mojotone speakers are produced using soft parts from Europe. Our team spent many years testing various speakers and used collective
knowledge to create the well known BV series speakers that are loved and trusted by guitarists. Those seeking vintage British voiced speakers need to look no further, our BV25 is the answer. These speakers sound like early 70's greenback.

Technical Data:

Speaker Size: 12"
Voice Coil: 1.75"
Magnet: 37 oz. Ceramic
Power Handing: 25 watts
Resonance (Fs): 77Hz
Sensitivity: 97db

Files:

Datasheet

125,00 €

Kit Seriel FX-Loop LND150

Active, serial FX-Loop for a subsequent installation in an existing tube amplifier
The FX-Loop works with two LND150 in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

Documentation

24,50 €

Kit Tube FX-Loop 6112

Kit of an active, serial tube-driven FX-Loop (with parallel option) for a subsequent installation in an existing tube amplifier
The FX-Loop works with one 6112 miniature tube in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

Heater:
6,3 V @ 300 mA

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

36,00 €