Footswitch SPDT latching, ON - ON

• anodized aluminum cap for foot switch
• with set-screws
• for all foot switches with a 10 mm head diameter

anodized aluminum cap for foot switch
with set-screws

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

Width ca. 135 cm
Price per linear meter.
Actual shades may vary.
We ship the tolex as one piece if you order more than 1 meter.

• Size: 145 x 121 x 35 mm
• Color: Natural

• Power Rating: 0,125 W log
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6 mm, Splitt Shaft (knurled)

• Power Rating: 0,125 W log
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6 mm, Splitt Shaft (knurled)

• Power Rating: 0,125 W log
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6 mm, Splitt Shaft (knurled)

• Power Rating: 0,125 W log
• Voltage Rating: 150 V AC
• Tolerance: 20%
• Shaft: 6 mm, Splitt Shaft (knurled)

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

• Type: Rocker Switch
• Version: DPST  ON-OFF, Lighted red, labeled I/O
• Recess: 30 x 22 mm, Snap-in mount
• Rating: max. 16A/250V AC
• Termination Style: solder lug / quick-connect terminals

• Type: Footswitch
• Version: SPDT momentary ON - (ON)
• Drill Ø: 12 mm
• Termination Style: solder-lugs

1/4" stereo jack, switched, with chrome ferrule and straight PCB pins
Mounting nut included

• Wide body and extremely durable contacts
• Mates with all stereo A-gauge plugs acc. EIA RS-453 standard