Tolex VOX®-Style red basket SAMPLE

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

• Safety Datasheet

Replacement potentiometer for Marshall JCM900, JCM600 and Valvestate 8XXX-Series
16 mm Body, Splitt Shaft, PCB

Replacement potentiometer for Marshall JCM900, JCM600 and Valvestate 8XXX-Series
16 mm Body, Splitt Shaft, PCB

Width approx. 135 cm
Price per running meter
Color reproduction depends on the computer monitor and may vary
Supplied as one continuous piece when ordering more than 1 m

Material:

• 80% PVC film
• 20% polyester-cotton fabric
• REACH compliant

Please note!
When ordering more than 1 m of Tolex and selecting Deutsche Post / DHL Paket or Express as the shipping method, the Tolex will be cut to a width of approx. 115 cm. This is due to the maximum permitted parcel length of 120 cm for these shipping services.
To receive the full roll width, GLS or ExprexxXL must be selected as the shipping method.

Universal Mono/Stereo Terminal, replacement for Marshall Terminal ME-19605000 which is used in 2X12 or 4X12 Marshall speaker cabs, with extended connections and possibilities. For the used with a 4X12 a second wireset is needed to connect two speakers in parallel. Please see the list with recommended products.

If used with this speakers

• 2 x 8 Ohms or
• 4 x 16 Ohms or
• 4 x 4 Ohm

one will get the following connection options

• 4 ohm mono
• 8 ohm left + 8 ohm right stereo
• 8 ohm left only mono
• 8 ohm right only mono
• 16 ohm mono

Colorcodes:

• black: L-
• red: L +
• green: R -
• white: R +

Files:

• Datasheet