Sovtek EL84 / 6BQ5 - SINGLE
Sovtek EL84 / 6BQ5 - SINGLE

Sovtek EL84 / 6BQ5 - SINGLE

Product No.:
soel84-single
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
Stock:
3 piece
RoHs:
conform
Weight:
0.025 kg per piece
16,20 €

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

EH 12AX7 / ECC83 Balanced

TT Selection: Balanced
Both systems with balanced gain

  • The 12AX7EH provides high gain with ultra low noise and detailed, musical tone that rivals the most desirable NOS types.

Files:

28,20 €

Sovtek 12AX7 / ECC83 WB - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The Sovtek 12AX7WB has more gain and saturation than the Sovtek 12AX7WA. Its warmer, darker sound is preferred by Rivera, VHT, Demeter, and Kendrick, among other manufacturers.

27,90 €

EH 7025 (12AX7 / ECC83 HQ)
Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.
19,80 €

TT Diffusor 10"

Universal size for 10" speakers
Dome diameter:  80 mm

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

14,75 €

Resistor Metaloxide 2 Watts / 1,5 kOhms - Pack of 5
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
  • Pack of 5
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
1,15 €
0,23 € per Piece

Resistor Metaloxide 2 Watts / 82 kOhms
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
0,20 €

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm
- recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

15,85 €

Label "Impedance", round, black
  • Material: 1.5 mm transply
  • Ø-Outside: 42 mm
  • Color: Black
  • Letters: White
0,99 €

Metalfilm Resistor 68k Ohm / 1% / 0,5 W - Pack of 5

Metalfilm Resistor
Great for amps and effects, low noise, small size, high power rating

Spezification:

  • Power: 0,5 Watt
  • Voltag: 350 V working / 700 V overload
  • Axial Leads
  • -55° C - 155° C
  • 9,4 * 3,2 mm
  • 1,0 %
  • RoHS
0,85 €
0,17 € per Piece

Metalfilm Resistor 6.8k Ohm / 1% / 0,5 W - Pack of 5

Metalfilm Resistor
Great for amps and effects, low noise, small size, high power rating

Spezification:

  • Power: 0,5 Watt
  • Voltag: 350 V working / 700 V overload
  • Axial Leads
  • -55° C - 155° C
  • 9,4 * 3,2 mm
  • 1,0 %
  • RoHS
0,85 €
0,17 € per Piece

Footswitch Fender® Vintage-Style, 2-Button, black  (0994051000)
Fender® style Footswitch
For older Twin Reverb®, Deluxe Reverb, Pro Reverb, Super Reverb, Bandmaster Reverb, and all vintage amps with 2-way footswitchable ON/OFF with RCA connector.
  • Color: black
  • 2-button
  • Vintage style, black
  • RCA-Plug
  • ca. 5 m shileded wire
  • Replacement for Fender 0994051000
25,90 €