Sovtek 6BQ5WA / EL84M - QUAD
Sovtek 6BQ5WA / EL84M - QUAD

Sovtek 6BQ5WA / EL84M - QUAD

Product No.:
so6BQ5WA-quad
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
Stock:
5 Quad
RoHs:
conform
Weight:
0.1 kg per Quad
132,00 €
33,00 € per Piece

incl. VAT excl. Shipping costs

Customers who bought this product bought also the following products:

Resistor Metaloxide 1 Watt / 1 Ohms - BIAS measuring resistor

Metaloxide film resistor

  • Nominal Power: 1 Watt
  • Max. cont. Working Voltage:: 500 V RMS
  • Tolerance: +/- 5%
  • Temperature range: -55° C...200° C
  • Flame retardant
  • Small Size
  • Size: 9,7 x 2,4 mm
0,17 €

Socket-Saver Noval
  • Type: Noval Socket Saver
  •   Bakelit
  • for Tube Type: 12AX7, 12AT7, 12AU7, EL84,
  •   EZ81, EL844 etc.
1,50 €

TT 12AX7 / ECC83 Classic V1
TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)


The TT12AX7 impresses with its fine and detailed reproduction of the highs, which is maintained even at high amplification levels. Due to a higher H3 part, the TT12AX7 sounds significantly cleaner than many other 12AX7/ECC83 tubes, which makes the bass range appear much tighter. We therefore especially recommend this tube for styles such as clean, crunch, and metal, where high amplification and clear transparency are required.

Electrical Characteristics

  • Heater voltage (Uf): 6.3V or 12.6V
  • Heater current (If): 300mA at 6.3V, 150mA at 12.6V
  • Anode voltage (Ua): Maximum 300V
  • Grid voltages (Ug1): -2V (typical)
  • Grid voltages: -50V to 0V
  • Anode current (Ia): 1.2mA (typical)
  • Anode power dissipation: Maximum 1W per triode
  • Anode resistance (ra): 62.5kΩ
  • Amplification factor (μ): 100
  • Transconductance (S): 1.6mA/V
  • Input capacitance (Cin): 1.6pF
  • Output capacitance (Cout): 1.6pF

Mechanical Characteristics

  • Socket: B9A (Noval)
  • Number of pins: 9

Pin Configuration

  • 1 Anode (Triode 1)
  • 2 Grid (Triode 1)
  • 3 Cathode (Triode 1)
  • 4 Heater (f)
  • 5 Heater (f)
  • 6 Anode (Triode 2)
  • 7 Grid (Triode 2)
  • 8 Cathode (Triode 2)
  • 9 Center Heater (f)

Application Notes

  • Heater operation: The tube can be operated with 6.3V or 12.6V, depending on the circuit design.
  • Grid resistors: It is recommended to use grid resistors of at least 1MΩ to ensure stable functionality.
  • Coupling capacitors: Capacitors with low capacitance (typically 0.1µF) are recommended to minimize high-frequency interference.
24,95 €