Retro Panel Meter 100 mA DC

A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling.With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow- sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack:

General Specifications

• Nominal diameter: 10", 254mm
• Power rating: 60Wrms
• Nominal impedance: Available 8Ω or 16Ω
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Roundcopper
• Magnet type: Ceramic
• Magnet weight: 31oz, 0.88kg
• Frequency range: 100-5500Hz
• Resonance frequency, Fs: 115Hz
• DC resistance, Re: Available 7.47Ω or 12.33Ω

• Cut-out diameter: 9.0", 229mm
• Diameter: 10.1", 256mm
• Magnet structure diameter: 5.3", 134mm
• Mounting slot dimensions: 0.2 x 0.3", 6 x 8mm
• Mounting slot PCD: 9.6", 245mm
• Number of mounting slots: 4
• Overall depth: 4.1", 104mm
• Unit weight: 5.3lb, 2.4kg

• This brass adapter sleeve converts a 6mm shaft potentiometer or 18T knurled shaft potentiometer to ¼" shaft (6.35mm), allowing for ¼" knobs to be used on a wider range of potentiometers. ¼" tall.

• Type: Alpha Rotary Switch
• Version: 2 pole / 6 positions, non-Shorting
• Shaft lenght: 19 mm
• Rating: 0.3 A / 125 V/AC
• Contact resistance: max. 50 mΩ
• Insulation resistance: min. 100 mΩ / 500 V/DC
• Termination Style: solder lugs
• Shaft: 6,3 mm
• Drill Ø: 8,9 mm