Orange Drop 0,033 µF @ 600 V
Orange Drop 0,033 µF @ 600 V
Orange Drop 0,033 µF @ 600 V

Orange Drop 0,033 µF @ 600 V

Product No.:
crd033
In stock. Delivery time depends on the destination country* In stock. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.004 kg per piece
2,20 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
EU legal guarantee notice
Description

ORANGE DROP®, Low Loss

  • Type:  Polypropylene Film Capacitors
  • Voltage Rating: 600 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial
Safety Information
Safety Information for Electrical Components, Especially for Tube Amplifiers

For all electrical, electromechanical, and mechanical components, the specifications and operating parameters defined by the respective type standards generally apply.
Further information, where available, can be found in the respective data sheets and product descriptions included with the product.

General Information
  • NOT SUITABLE FOR CHILDREN – choking hazard due to small parts
  • NOT SUITABLE FOR UNTRAINED PERSONS – danger to life due to high voltages
  • The safety and processing requirements applicable to the component must be observed
  • CE conformity applies only when installed professionally
  • Warranty becomes void in case of improper handling
  • The operator is responsible for proper installation
  • Local regulations and VDE provisions must be complied with
  • Never exceed the rated power
  • Never exceed the rated voltages and currents
Required Expertise
  • Use of measuring instruments (multimeter, oscilloscope) and evaluation of measurement results
  • Safe handling of high voltages (up to 500V and more)
  • Reading and understanding circuit diagrams
  • Selection of appropriate tools
  • Knowledge of electrical components and their characteristics
  • First-aid knowledge for electrical accidents
  • Knowledge of VDE regulations and safety requirements
Specific Safety Instructions by Component Groups

Amplifier Tubes
  • Hazard due to high voltages
  • Hazard due to very high heat generation
  • Hazard due to glass breakage
  • Hazard due to UV radiation in case of defective tubes
Transformers & Chokes
For qualified personnel only! Installation and removal of power transformers, chokes, output transformers, and switching power supplies may only be carried out by qualified specialists.
  • Hazard due to high voltages
  • Risk of electric shock
  • Hazard due to heavy weight
  • Risk of injury
  • Fire hazard in case of overload
Capacitors
  • Explosion hazard if electrolytic capacitors are connected with incorrect polarity
  • Never exceed the rated operating voltage
  • Hazard due to high voltages
  • Risk of electric shock
  • Capacitors can store voltage for hours
Resistors
  • Hazard due to high heat generation
  • Hazard due to high voltages
  • Fire hazard in case of overload
  • Hazard due to hot surfaces
  • Risk of burns
Fuses
  • Replace only with identical ratings
  • Never bypass or "repair" a fuse
  • Identify the cause of fuse failure before replacement
  • Fire hazard when using incorrect fuse ratings
Relays & Switches
  • Hazard due to switching sparks
  • Contact damage in case of overload
  • Fire hazard due to defective contacts
Potentiometers & Rotary Switches
  • Hazard due to high voltages at the contacts
  • Fire hazard in case of overload
  • Mechanical damage may lead to short circuits
Diodes & Rectifiers
  • Hazard due to high voltages
  • Heat generation
  • Risk of burns
  • Observe correct polarity
  • Malfunction in case of incorrect polarity
  • Heat sinks required for power diodes
Sockets, Connectors & Cables
  • Hazard due to high voltages
  • Check insulation for damage
  • Ensure proper strain relief
  • Fire hazard due to undersized cables
  • Touch protection required for high-voltage connectors
Heat Sinks & Fans
  • Risk of burns due to hot surfaces
  • Risk of mechanical injury from moving fans
  • Electrical hazard in case of defective fan motors
Circuit Boards & Turret/Lug Terminals
  • Hazard due to sharp edges
  • Fire hazard during soldering
  • Hazard due to solder fumes
  • Adequate ventilation required
  • Observe ESD protection
Housing Parts & Mounting Hardware
  • Risk of injury due to sharp edges
  • Electrical safety must be ensured
  • Observe proper grounding
  • Provide adequate ventilation openings
  • Ensure protection against contact with live parts
Measuring Instruments & Indicators
  • Hazard due to high voltages in analog instruments
  • Fragile glass front
  • Risk of injury
Documents
Orange Drops 715 Series  (143.88 KB)
Orange Drops 715P Serie Datasheet  (456.1 KB)
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

CTS Potentiometer 250 kOhm linear, Solid Shaft
CTS Potentiometer 250 kOhm linear, Solid Shaft
Panel Mount Potentiometer
  • Power Rating: 0,3 W
  • Tolerance: 20%
  • Shaft: 6,3 mm, solid metal
  • Shaft length: 9 mm
  • Drill Ø: 9,5 mm
  • Termination: Solder lugs
  • Dimension: 24 mm
6,20 €
Heat shrink tube, set of 100, multicolored
Heat shrink tube, set of 100, multicolored

Mixed sizes and colors, length 10 cm / ea

  • 30 x 1,5mm Ø
  • 30 x 2,5mm Ø
  • 20 x 4mm Ø
  • 10 x 6mm Ø
  • 6 x 10mm Ø
  • 4 x 13mm Ø

In plastic box

1,45 €
Mallory 150's 0,022 µF / 250 VDC
Mallory 150's 0,022 µF / 250 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
Specifications:
  • Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
  • Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
  • Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
  • Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
  • Self Inductance: 1 nH max. per 1 mm lead and body length
  • Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
  • Damp Heat Test: 95% RH @ +45 ºC for 21 days
  • Soldering: 260 ºC ±5 ºC for 10 s ±1 s
  • Long Term Storage Stability: ?C/C = ±3% after 2 years
1,10 €
Orange Drop 6PS-Series 0,0012 µF / 600 V
Orange Drop 6PS-Series 0,0012 µF / 600 V
ORANGE DROP®, PS Series
  • Type: Polyester Film Capacitor
  • Voltage Rating: 600 V
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial, copper leads
1,65 €
Mallory 150's 0,001 µF / 630 VDC
Mallory 150's 0,001 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
Specifications:
  • Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
  • Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
  • Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
  • Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
  • Self Inductance: 1 nH max. per 1 mm lead and body length
  • Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
  • Damp Heat Test: 95% RH @ +45 ºC for 21 days
  • Soldering: 260 ºC ±5 ºC for 10 s ±1 s
  • Long Term Storage Stability: ?C/C = ±3% after 2 years
1,25 €
Orange Drop 225P Series 0,068 µF @ 100 V
Orange Drop 225P Series 0,068 µF @ 100 V

Vishay ORANGE DROP® 225P

  • Type:  Polyester Film Capacitors
  • Voltage Rating: 100 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial
3,05 €
Resistor Metaloxide 2 Watts / 120 kOhms
Resistor Metaloxide 2 Watts / 120 kOhms
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Different manufacturers
Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm
0,20 €
Orange Drop 225P Series 0,0047 µF @ 400 V
Orange Drop 225P Series 0,0047 µF @ 400 V

Vishay ORANGE DROP® 225P

  • Type:  Polyester Film Capacitors
  • Voltage Rating: 400 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial
2,45 €
Knob Chickenhead Redwine
Knob Chickenhead Redwine
  • Type: Chickenhead
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 32 x 13,7 mm
  • Mounting: Set-Screw
0,95 €
Orange Drop 0,01 µF @ 600 V
Orange Drop 0,01 µF @ 600 V

ORANGE DROP®, Low Loss

  • Type:  Polypropylene Film Capacitors
  • Voltage Rating: 600 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial
2,00 €
Knob Chickenhead blue
Knob Chickenhead blue
  • Type: Chickenhead
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 32 x 13,7 mm
  • Mounting: Set-Screw
0,90 €
Silver Mica 500 pF
Silver Mica 500 pF
Mica Capacitors
  • Voltage Rating:    500 V
  • Tolerance: 5%
  • Operating Temperature Range: - 50°C / + 150°C
  • Termination Style: radial
1,15 €
Silver Mica 390 pF
Silver Mica 390 pF
Mica Capacitors
  • Voltage Rating:    500 V
  • Tolerance: 5%
  • Operating Temperature Range: - 50°C / + 150°C
  • Termination Style: radial
0,66 €
Orange Drop 0,047 µF @ 600 V
Orange Drop 0,047 µF @ 600 V

ORANGE DROP®, Low Loss

  • Type:  Polypropylene Film Capacitors
  • Voltage Rating: 600 V
  • Tolerance: - 10 % / +10 %
  • Operating Temperature Range: - 55°C / + 85 °C
  • Termination Style: radial
2,40 €
Knob Chickenhead seafoam
Knob Chickenhead seafoam
  • Type: Chickenhead
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 32 x 13,7 mm
  • Mounting: Set-Screw
1,35 €
For more information, please visit the home page for this product.