Main page » Components » Jacks & Plugs » Jacks 6,3 mm » Neutrik NMJ4HCD2 - 6,3 mm Mono switched, PCB

Neutrik NMJ4HCD2 - 6,3 mm Mono switched, PCB

Description

1/4" mono jack, switched, with straight PCB pins
Mounting nut included

Wide body and extremely durable contacts
Mates with all mono A-gauge plugs acc. EIA RS-453 standard

Files:

Datasheet

Manufacturer

Herstellerinformationen | Manufacturer Information
Neutrik EMEA GmbH
Marie-Curie-Strasse 2
85221 Dachau
Germany
eMail neutrik.emea.de@neutrikgroup.com

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Kit LNDVerb

The LNDVerb kit is based on a classic Fender reverb circuit, but uses LND 150 Mosfets instead of tubes. These can be operated at voltages as high as 500 V, to get as close as possible to the characteristics of real tubes.

The kit can be integrated into an existing amplifier or can be build as standalone unit like the Fender tube reverb.

The unit needs less than 10 mA current, so a VPump for example can be used as power supply in a standalone build. If it gets integrated into an existing amplifier the already present power supply of the amp can be used to supply the needed voltage for the unit without the need to upgrade the power transformer.

A reverb transformer of the type 125A20B or similar and a reverb tank are necessary to operate the LNDVerb. These are both not included in the kit.

The needed RCA phone sockets and potentiometers are included in the kit.

Further informations and examples of the finished unit can be found in the PDF below.

Matching parts are linked below and can be ordered with the unit if needed.

Files:

Datasheet

19,80 €

Kit Seriel FX-Loop LND150

Active, serial FX-Loop for a subsequent installation in an existing tube amplifier
The FX-Loop works with two LND150 in the send and in the return stage. The send and return level can be adjusted to their optimal value with two potentiometers. The Loop works with the present high voltage of the amplifier.
It has two inputs for low and high signal levels.

Input Levels:
InA: 30 - 60 Vpp, max. 65 Vpp
InB: 10 - 15 Vpp, max. 18 Vpp

The FX-Loop utilize POTENTIALLY FATAL HIGH VOLTAGES.
Seek help from a competent technician if you are in any way unfamiliar with high voltage circuits.
Use at your own risk.

Files:

Documentation

27,80 €

Tonespeak Austin 1250 12" / 50 W / 16 Ohm

Balance, punch, fullness, and clarity are at the forefront of this speaker. The mids are tailored and even, enabling the articulation, openness, air, and a nice glassiness to shine through in the highs. The tight, solid, and responsive lows round out the tone and perfectly balance the detail in the highs. A very musical speaker optimized for the ever so popular Deluxe Reverb, but suitable anywhere you want pure American tone.

Spzification:

Nominal Impedance(Z): 16 Ohm
Rated Power IEC268-5: 50 Watt
Sensitivity (@1W/1 m): 100 dB/SPL
Frequency range: 80 – 5000 Hz
Resonant Frequency (Fs): 90 Hz
Voice Coil Diameter: 1,75"

Files:

Datasheet

129,00 €