Main page » Speaker » by manufacturers » Mojotone » Mojotone Anthem 12" / 50 W / 16 Ohm

Mojotone Anthem 12" / 50 W / 16 Ohm

A huge part of being a musician is being intentional about your work. This concept can apply to sound, songwriting, aesthetic, and even gear selection; which goes hand-in-hand with the philosophy behind our Anthem Series Speakers. Each speaker in our Anthem Series was purpose-built to optimize their overall power and functionality without compromising their finely-tuned classic American-voiced tone. After hundreds of hours of research, parts selection, and testing, we’re confident we have outfitted each of these speaker baskets with their perfect paper, voice coil, and magnet counterparts. Straight-seamed ribbed cones, were chosen for their superior performance and unmatched tone, and top-shelf voice coils and magnets have been carefully paired to each of their respective speaker cone sizes.

Technical Data:

Files:

Datasheet

Manufacturer

Herstellerinformationen | Manufacturer Information
Mojo Musical Supply
513 S. Dudley St
NC 28425 Burgaw
USA
https://www.mojotone.com/

EU Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

WGS Retro 30 12" / 75 W / 16 Ohm

The 12” Retro 30™ speaker is a brighter and more articulate version of the WGS Veteran 30™ speaker. The Retro 30™ also boasts deeper and tighter bottom end. This speaker is extremely versatile and comes alive on the dirty channel. For those who love to mix speakers, you should pair this with the Reaper™ or the ET65™.

Unit Weight: 10 pounds

Mounting Information

Diameter: 12.2”
Overall depth: 5.3”
Cut-out diameter: 11.1”
Mounting slot dimensions: 0.31”
Number of mounting slots: 8

Thiele-Small Parameters (8 Ohm speaker)

Resonant Frequency (Fs): 103.76 Hz
DC Resistance (Re): 8.04 Ohm
Coil Inductance (Le): 0.33 mH
Mechanical Q (Qms): 9.73
Electromagnetic Q (Qes): 0.75
Total Q (Qts): 0.70
Compliance Equiv. Vol. (Vas): 16.28 cu ft
Mech. Compliance of Susp. (Cms): 0.09 mm/N
BL Product (BL): 13.85 T-M
Diaphragm Mass Inc. Airload (Mms): 27.48 grams
Surface Area of Cone (Sd): 366.10 cm squared
Sound Pressure Level (spl): 99.63 db

129,00 €

WGS Reaper HP 12" / 50 W / 16 Ohm

The 12” high power Reaper HP™ is designed to go where the 30 watt version couldn't. If you want a good clean tone with just the right amount of breakup at medium-high volume, then this is your speaker. This 50 watt version is both warmer and more powerful than the 30 watt version.

Unit Weight: 10 pounds

Mounting Information

Diameter: 12.2”
Overall depth: 5.3”
Cut-out diameter: 11.1”
Mounting slot dimensions: 0.31”
Number of mounting slots: 8

Thiele-Small Parameters

Resonant Frequency (Fs): 101.9 Hz
DC Resistance (Re): 6.7 Ohm
Coil Inductance (Le): 8 mH
Mechanical Q (Qms): 8.613
Electromagnetic Q (Qes): 0.7235
Total Q (Qts): 0.6674
Compliance Equiv. Vol. (Vas): 1.384 cu ft
Mech. Compliance of Susp. (Cms): 87.6 mm/N
BL Product (BL): 13.76 T-M
Diaphragm Mass Inc. Airload (Mms): 27.8476 grams
Surface Area of Cone (Sd): 558.645 cm squared
Sound Pressure Level (spl): 99.42 db

129,00 €

Celestion Bass PULSE 12 12" / 200 W / 8 Ohm

PULSE12
For bass players demanding well-defined clarity and stunning articulationtogether with a rich, full tone, PULSE12 bass speakers deliver an idealcombination of responsiveness and rock solid low end. The Kevlar-loaded conepulses with up to 200 watts of raw bass power. Expect each note to deliver athick, percussive attack along with the mid-range necessary to break through inany performance situation.

General Specifications

Nominal diameter: 12", 304.8mm
Power rating: 200W
Nominal impedance: 8 Ohm
Sensitivity: 94dB
Magnet type: Ferrite
Voice coil diameter: 2", 50.8mm
Coil material: Copper
Cone material: Kevlar loaded paper
Former material: Polyimide
Surround material: Cloth-sealed
Frequency range: 45-3500Hz
Xmax: 0.15", 4mm
Gap depth: 0.31", 8mm
Voice coil winding width: 0.62", 16mm

Small Signal Parameters

D: 0.26m/10.2in
Fs: 45Hz
Mms: 47.6g/1.68oz
Qms: 2.74
Qes: 0.49
Mmd: 40.7g/1.44oz
Qts: 0.42
Re: 5.88O
Vas: 104.6lt/3.7cu.ft.
BI: 12.71Tm
Cms: 0.26mm/N
Rms: 4.92kg/s
Le (at 1kHz): 1.0mH

Mounting Information

Cut-out diameter: 11.1", 283mm
Diameter: 12.2", 309mm
Mounting slot dimensions: 0.31", 7.9mm Ø
Mounting slot PCD: 11.7", 297mm
Number of mounting slots: 4
Overall depth: 5.1", 130mm
Unit weight: 7lb, 3.2kg

109,00 €