MOD Reverb Tank 9AB2C1B
MOD Reverb Tank 9AB2C1B
Preview: MOD Reverb Tank 9AB2C1B
Preview: MOD Reverb Tank 9AB2C1B
MOD Reverb Tank 9AB2C1B
MOD Reverb Tank 9AB2C1B
MOD Reverb Tank 9AB2C1B
Mobile Preview: MOD Reverb Tank 9AB2C1B
Mobile Preview: MOD Reverb Tank 9AB2C1B
SOLD OUT

MOD Reverb Tank 9AB2C1B

Product No.:
ra-mod9AB2C1B
<font color=red><b>Temporarily out of stock</b></font></br>Please see hint for delivery time notice Temporarily out of stock
Please see hint for delivery time notice 
RoHs:
conform
Hint:
Available again ca. 30.06.2025
Weight:
0.68 kg per piece
42,80 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description
Reverb Tank 9AB2C1B
  • Springs: 3
  • Delay type: Medium
  • Size: Long
  • Input: 10 Ω
  • Output: 2.575 Ω
  • Connector: Input isolated/output grounded
  • Interlock: No interlock
  • Mounting: Horizontal / open side down
Information about the manufacturer
Herstellerinformationen | Manufacturer Information
CE Distribution LLC
6221 S Maple Ave · Tempe, AZ 85283 · 480-755-4712
USA
http://www.cedist.com

EU Wirtschaftsakteur | EU Economic Operator
Tube-Town GmbH, Rumbergring 37, 66969 Lemberg, Germany, info@tube-town.de
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Tube-Town Reverb Tank RCA cable, 48" (120 cm)
Tube-Town Reverb Tank RCA cable, 48" (120 cm)
  • Reverb Tank RCA cable
  • ca. 48" (120 cm)
  • Right-Angle plugs
  • Replaces Fender Reverb-Tank RCA cable
1,95 €

JJ 12AX7 / ECC83S Balanced
JJ 12AX7 / ECC83S Balanced

TT Selection: Balanced
Both systems with balanced gain

Sweet and warm sounding preamp tube with high gain.

21,90 €

Fender Chassis-Straps Medium
Fender Chassis-Straps Medium
  • Mounting hole distance around 101 mm
  • Medium Chrome straps
  • length around 4-5/8" (11.7 cm) end to end
  • mounting screws included
  • For '65 Deluxe, Super, '63 Vibroverb and Vibrolux®
15,35 €

JJ 5U4GB
JJ 5U4GB
5U4GB is a directly heated full wave octal base rectifier for Hi-Fi and guitar amplifiers. Suitable for use in any 5U4 socket.
21,20 €

Tube-Town Reverb Tank Bag 17", Black
Tube-Town Reverb Tank Bag 17", Black
  • Bag for Reverb Tank
  • Size: 17"  (43cm)
  • Black Tolex


 

14,20 €

Signal wire LiYDY 1 x 0,14 mm², shielded, 1m
Signal wire LiYDY 1 x 0,14 mm², shielded, 1m
  • Signal wire LiYDY 1 x 0,14 mm², shielded
  • Diameter Outside: ca. 2,6 mm
  • Voltage Rating max: 50 / 75 V AC / DC
  • Capacity: ca. 260 pF / m
  • Temperature range: -10 bis +70 C°
  • Conductor resistance: 40 Ohm / km @ 20 C°
  • Test voltage: > 1 kHz
  • IEC 60228/ VDE 0295
  • Length 1 m
1,20 €

Socket Octal Belton, Chassis VT8
Socket Octal Belton, Chassis VT8
Octal Socket Belton VT8
  • Version: High quality Micalex socket
  • Chassis mount
  • Termination Style: solder lugs
  • for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.
2,35 €

Hammond 1750A 125A20B / 022921 for Fender Reverb
Hammond 1750A 125A20B / 022921 for Fender Reverb

Reverb Driver 125A20B / 022921 Single-Ended, 3,5 Watt.

36,50 €

Fender Blackface Style Knob black
Fender Blackface Style Knob black
  • Type: Fender Blackface Style Knob
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 30 x 16,1 mm
  • Mounting: Set-Screw
2,60 €

Shield Noval silver
Shield Noval silver
Tube Shield Noval
  • for noval sockets
  • Color: silver
  • High: 55 mm
  • Including Base and Shield
0,95 €

Socket Noval Belton, VT9-ST-C Chassis
Socket Noval Belton, VT9-ST-C Chassis
  • Type: Noval Socket Belton VT9-ST-C
  • Version: Chassis mount
  • Termination Style: solder lugs
  • for Tube Type: 12AX7, 12AT7, 12AU7, EL84,
  •   EZ81, EL844 etc.
2,10 €

TT-Chassis Fender Style - Princeton Reverb, bare
TT-Chassis Fender Style - Princeton Reverb, bare

Fender Princeton Reverb Style Chassis, bare
Without drills and cutouts

  • Size : 463 x 176,3 x 45 mm
  • Material: 2 mm Aluminium
  • Protectionfoil Outside
  • Made in Germany
24,85 €

Capacitor Clamp 40 mm
Capacitor Clamp 40 mm
  • Capacitor Clamp
  • d = 40 mm
2,50 €

Fuseholder 5 x 20 mm, black
Fuseholder 5 x 20 mm, black
  • Rated voltage: 250 VAC
  • Rated current: 10 A (VDE), 16 A (UL/CSA)
0,75 €

JJ 6V6 Red Labe - PAIR - Double Mica Special Edition
JJ 6V6 Red Labe - PAIR - Double Mica Special Edition
2 tubes, matched as pair

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.
55,00 €
27,50 € per Piece