Hookup Wire LIH/125 0,5 mm², High Voltage, 5 m, black

• solid tinned copper wire
• Wire diameter: 0.8 mm
• Cross-section: 0.5 mm²
• Outer diameter: 1.4 mm
• PVC insulation
• Rated voltage: max.: 900 V
• Temperature range: –15 °C to +70 °C
• Length: 100 m

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

Files

• Datasheet

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The Sovtek 12AX7WA is a defacto standard in 12AX7 tubes for many years yet because of its high dependability and its low noise floor.

• RCA Phono socket gold plated with Teflon insulation
• 1 x black
• 1 x red
• 1 x white
• 1 x yellow
• Installation diameter: 6 mm

• Pri: 0-220-230-240 V (blue-black-orange-yellow)
• Sec 1: 300-0-300 V @ 0,126 A (red-green/white-blue)
• Sec 2: 0-5-6,3V @ 2 / 1 A (orange-pink-gray)
• Sec 3: 3,15-0-3,15 V @ 3,25 A (black-brown-purple)
• long leads ca. 200 mm
• Size: 102 x 52 mm

A customer from Sweden has send us this info:
this PT can be used to replace the power transformer in an Egnator Tweaker 15. Please see:
http://www.rig-talk.com/forum/viewtopic.php?f=26&t=169993
and
http://www.thegearpage.net/board/index.php?threads/egnater-tweaker-15-mods-if-any.1184645/page-4
Tweaker 15 original PT

Primary windings
1; Brown - Black (117 VAC)
2; Blue - White (100VAC)
For 230 VAC use :
Blue and Black cables are connected together
and Brown and White cables connected to 230 VAC

Secondary windings
1; Red-Black-Red ( 290 VAC - Center Tap[ground] - 290 VAC)
   Connections on circuit board = QC8 -- QC10 -- QC9

2; Green-Black-Green ( 3.15 VAC - Center Tap - 3.15 VAC) Heater
    Connections on circuit board = QC23 -- QC3 -- QC20

 

JJ's version of the ECC81/12AT7 tube type with a warm and soft sound. Often used for phase inverters or reverb drivers.

Files:

• Datasheet

Psvane 12AX7 / ECC83 preamp tube from the Classic series with red logo.
Dropin replacement for all 12AX7, ECC83 and 7025 tubes.

[content:3210144]
[content:3210145]

• Type: Aluminum Electrolytic Capacitors
• Capacitance: 220 µF
• Voltage Rating: 350 V
• Tolerance: - 10%+30%
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 25 mm x 38 mm
• Termination Style: axial

Electrolytic Capacitor

• Capacitance: 30 µF
• Voltage Rating: 500 V
• Tolerance: -10 % / +30 %
• Operating Temperature Range: - 25°C / + 70 °C
• Dimensions: Ø 25 mm x 42 mm
• Termination Style: axial leads

• Type: Electrolytic can capacitor
• Capacitance: 1000 µF
• Voltage Rating: 25 V
• Tolerance: - 20 % / +20 %
• Operating Temperature Range: - 40°C / + 85 °C
• Dimensions: Ø 10 mm x 19 mm
• Termination Style: radial
• Grid: 5

Images are for reference only. See Product Specifications

• Pri: 0-115-220-230-240 V (schwarz-grün-gelb-lila-rot / black-green-yellow-purple-red)
• Sec1: 300 V @ 0,1 A (rot / red)
• Sec2: 6,3 V @ 2 A (grün / green)
• Sec3: 12,6 V @ 1 A (blau / blue)
• long leads ca 200 mm
• Size ca. h=38mm d=90mm
• 50/60 Hz EN 61558