Faceplate Tonehound Light

The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load, ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 100 W / 16 Ohm

The kit comes with these items:

• capacitors
• resistors
• coils
• jacks
• knobs
• screws
• wires

NOT included:

• aluminum chassis
• faceplate
• tools and solder

The needed tools are a reasonable solder station, screw drivers, flat pliers, a countersink and a little craftsmanship.

Size: 210 x 150 x 120 mm

The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load (Dummy-Load), ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 50 W / 16 Ohm

The kit comes with these items:

• capacitors
• resistors
• coils
• jacks
• knobs
• screws
• wires

NOT included:

• aluminum chassis
• faceplate
• tools and solder

The needed tools are a reasonable solder station, screw drivers, flat pliers, a countersink and a little craftsmanship.

Size: 210 x 150 x 120 mm

The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load, ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 100 W / 8 Ohm

The kit comes with these items:

• capacitors
• resistors
• coils
• jacks
• knobs
• screws
• wires

NOT included:

• aluminum chassis
• faceplate
• tools and solder

The needed tools are a reasonable solder station, screw drivers, flat pliers, a countersink and a little craftsmanship.

Size: 210 x 150 x 120 mm

The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load (Dummy-Load), ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 50 W / 8 Ohm

The kit comes with these items:

• capacitors
• resistors
• coils
• jacks
• knobs
• screws
• wires

NOT included:

• aluminum chassis
• faceplate
• tools and solder

The needed tools are a reasonable solder station, screw drivers, flat pliers, a countersink and a little craftsmanship.

Size: 210 x 150 x 120 mm

Chassis for the Tone-Hound Light Kits

• Material: 2 mm Aluminium
• All parts and screws are included
• Made in Germany
• Size: 210 x 150 x 120 mm

The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load, ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 100 W / 8 Ohm

The kit comes with these items:

• capacitors
• resistors
• coils
• jacks
• knobs
• screws
• wires

NOT included:

• aluminum chassis
• faceplate
• tools and solder

The needed tools are a reasonable solder station, screw drivers, flat pliers, a countersink and a little craftsmanship.

Size: 210 x 150 x 120 mm

EHX Oil Capacitors are oil impregnated, polyester capacitors that are enclosed in aluminum cylindrical cans and hermetically sealed for superior performance and durability. Impregnating the capacitors in oil eliminates air bubbles between the dielectric and foil that could affect their stability during operation. This enables the capacitors to operate over a wide temperature range with a very tight tolerance.
Originally, oil capacitors were only used in military and precision equipment as well as Hi-Fi audio. Due to their rich, natural tone, they are now widely used in guitars and guitar amplifiers. EHX Oil Capacitors have a balanced, detailed sound with a smooth, vintage top end. They will make any guitar or amplifier more responsive, touch sensitive, and refined.

Spezification:

• Capacitance: 0,0022 µF
• Voltage Rating: 600 V
• Dimensions:Ø 11 mm x 25 mm
• Termination Style: axial

Metaloxide film resistor

• Nominal Power: 1 Watt
• Max. cont. Working Voltage:: 500 V RMS
• Tolerance: +/- 1%
• Temperature range: -55° C...200° C
• Flame retardant
• Very Small Size
• Size: 6,3 x 2,4 mm

Panel Mount Potentiometer - 3/8"

• Power Rating: 0,25 W
• Voltage Rating: 250 V AC
• Tolerance: 20%
• Shaft: 6,35 mm, Solid Shaft
• Shaft length: 15 mm
• Drill Ø: 3/8-32 (9,45 mm)
• Termination: Solder lugs
• Dimension: 24 mm